Every data center requires numerous cable tray bends and drops—sometimes thousands in just one installation. With traditional cutting and bending, each drop can take over four hours to complete. With Cablobend Systems, you have the freedom to flexibly create the bends and drops that you need. No more cutting unless shortening the length.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Adjustable mesh tray fitting.
- Easy-to-bend flex wires. The quickest up-and-down bends in the industry.
- Shrink your installation time to just minutes per bend with zero cutting required on thousands of bends in a single project.
- Wide range of adjustability. Vertical and horizontal angle adjustability to 90° to fit any configuration.
- Available in three heights (2””, 4”” and 6””), five widths (6””, 8””, 12””, 18”” and 24””) and two finishes (EZ and BL).
- Safer installation, no need for cutting tools and less time on elevated areas for installation.
- Rigidity clips included to fasten sections together for added strength depending on your needs.
- Pre-made and pre-assembled for increased prefab efficiency.
Specifications
General Info
| Color | Black | ||
| Type | Bends | ||
| Material | Carbon Steel | ||
| Finish | Painted | ||
| Application Sector | Commercial, Industrial | ||
| Product Line | Cablofil | ||
| Country Of Origin | United States | ||
| UPC Number | 800388484696 |
Dimensions
| Product Depth US | 28.0 in | ||
| Product Height US | 4.0 in | ||
| Product Volume US | 1.667 cu ft | ||
| Product Width US | 18.0 in | ||
| Product Weight US | 10.451 lb |
Listing Agencies / 3rd Party Agencies
| cULus Listed | Yes |
Trade Programs
| USMCA | Yes | ||
| BAA | Yes | ||
| TAA Compliant | Yes |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Resources
Cutsheet
Submittal Sheet
Installation Instructions
Brochure
Catalog
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What is the load rating for this cable basket tray?
The wire mesh load table can be found in Cablofil's catalog. Below is a snapshot.
Date published: 2026-02-19
cat 6A cable fill capacity in the 24"x4" cable tray
497 cat6a cables with a 0.35" diameter can be installed in tray system CF105/600EZ (4" x 24" mesh tray)
Date published: 2023-12-26
Where is this product manufacturered?
The Cablobend is manufactured in the United States
Date published: 2022-10-15
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
![Front facing view of five On-Q 15" enclosure](https://resources.legrand.us/md_2dvsG2LxKpH1122u.jpg?1746731514 "Front facing view of five On-Q 15" enclosure")
ENP15605DNA | On-Q
(5) Pack 15" Plastic Structured Wiring Enclosure Cover and Trim
$216.41
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
L3-802JA2JYB1003F | Ortronics
Infinium Ultra LC Uniboot to MDC, Plenum, Duplex Patch Cords
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
RFBA2R25OG | Wiremold
Mix-and-match Resource RFBA Series Floor Boxes of any size with interchangeable components. Quick, easy installation. In-floor power and data services.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
HDJ6-13 | Ortronics
Clarity High Density Jacks
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
SWM26RUSD-26-26 | Ortronics
SWING-OUT WALL-MOUNT CABINETS
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
TV3WTVSSW | Pass and Seymour
Recessed design saves space and simplifies connections to multimedia components.
$127.97
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
SWM18RUSD-26-26 | Ortronics
SWING-OUT WALL-MOUNT CABINETS
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
SWM18RUPL-26-26 | Ortronics
SWING-OUT WALL-MOUNT CABINETS
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
RCD33DBCC6 | radiant Collection
Sleek and easy-to-install, combines two 15A switches usable in single pole or 3-way applications.
$40.42
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
110C5E09-09 | Ortronics
Clarity 5E 110/110 Patch Cord, Category 5e
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
PHD66U48-W | Ortronics
Clarity 6 96-port high density Category 6 patch panel is component compliant to EIA/TIA Category 6 performance requirements. It occupies four rack units and measures 19'' x 7''. Jacks are grouped in six-port modules. Part of the Clarity 6 link and channel solution that provides significant installed performance headroom.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
110C5E05-06 | Ortronics
Clarity 5E 110/110 Patch Cord, Category 5e
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
FX-XP-FG-DG | Connectrac
Floor Grommet
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
RS60HP | Pass and Seymour
Replacement Switch, 60As HP