adorne® Touch Tru-Universal Dimmer
ADTH703TUW4
adorne Collection
adorne® Touch Tru-Universal Dimmer is rated
out of
5 by
6.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$99.66 USD
Touch-style dimmers from the adorne Collection feature a translucent, glass-like face and operates with the simple touch of a finger on the center circle to turn lights on/off, or using the arrows on the side to dim. In multi-gang installations, we recommend pairing Touch switches and dimmers for consistency of control and aesthetic. A Tru-Universal Dimmer, this device works with virtually any 120V dimmable bulb or fixture. Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
Quantity
In Stock
Added to Your Shopping Cart
- Send
- Save as PDF
-
Favorite thisAdded to Favorites Go to favoritesRemove from favorites?
Features
- Installs in 15 minutes or less; neutral wire required.
- Works with virtually any 120V dimmable bulb or fixture.
- Self-calibrates when you select your fixture's lighting type, automatically setting the appropriate minimum voltage to eliminate flicker and poor performance.
- Constant memory features returns lights to their previous level when turning back on or after a power outage.
- Offers installation flexibility, working in both single-pole and 3-way applications.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a stunning, screwless adorne® Wall Plate, not included. Available in a range of contemporary colors and finishes. Coordinate with other designer switches & outlets.
Specifications
General Info
| Color | White | ||
| UPC Number | 785007133943 | ||
| Country Of Origin | China | ||
| Product Line | Pass & Seymour | ||
| Number of Switches | 1 | ||
| Warranty Type | Limited Lifetime Warranty |
Technical Information
| Wattage | 700 W | ||
| Number of Poles | Single Pole, 3-Way | ||
| Number of Gangs | 1 | ||
| Voltage | 120 V | ||
| Mounting Type | Box | ||
| Connection Type | Internal Pressure Plates |
Resources
Installation Instructions
Supporting Document
Reviews
Rated 4 out of
5
by
Kevin from
Works and Looks brilliant.
Works nicely. Makes a little click when activated. I had to program it to be a trailing edge light (to stop the LED from buzzing). Looks brilliant. The instructions didn't match up exactly with the actual device, but it was close enough
Date published: 2021-09-03
Rated 5 out of
5
by
Anonymous from
Tru Universal Dimmers
Super nice looking switches. Love the square look and the functionality.
Date published: 2021-02-01
Rated 5 out of
5
by
Anonymous from
Quality - Expected, Impressive Look - Guaranteed!
The dimmer works flawlessly - was never a concern of mine. I bought the dimmer and unique wall plate to set off my walls. People forget that something as small as a wiring device can give a room a completely different look.
Date published: 2020-10-17
Rated 4 out of
5
by
David from
Sleek and modern
The adorne collection has no equal when upgrading your existing outlets, dimmers, switches, etc. Aesthetically the best looking units on the market.
Date published: 2020-09-14
Rated 5 out of
5
by
Roger from
The Best keeps getting Better!
I started with Legrand Adorne several years ago liking the look a lot. I gradually replaced ALL my old switches and outlets with the Adorne line. Now I am replacing some rocker switches and push switches with the touch switches that are so cool! And the new touch switches are updated with nicer display lights to show the status than the original ones I installed in a few special places. And none of the original rocker switches or push switches had any issues, all worked as new so I gifted them to friends to use in their homes! VERY high quality devices and beautiful too!
Date published: 2019-05-07
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
If the ADTH703TUW4 will not work with a remote switch, what is needed to complete the three way setup? Do you need two ADTH703TUW4's?
Yes, the ADTH703TUW4 is wired like a traditional 3-way with a traveler wire.
Please see the attached installation instruction page.
Date published: 2021-09-20
Will the ADTH703TUW4 work with the older ADTHMRU remote?
The ADTH703TUW4 is not a master dimmer so it will not work with any type of remote control.
Date published: 2021-09-16
In another answer, it was written that "It can be switched into REVERSE Phase for Trailing Edge (ELV type) light loads." How does one make that switch?
This is in the instructions under USER ADJUSTMENTS:
Forward or Reverse Phase Selection
• Forward Phase is the default as shipped from factory.
• During manual Min Level Trim, touching On/Off button for approximately
10s toggles between Forward and Reverse Phase.
• The LED flash rate during calibration is approximately 1Hz for Reverse
Phase, approximately 3Hz for Forward Phase.
https://legrand.webdamdb.com/directdownload.php?ti=55648051&tok=tNeWmYmaZBFwcuQDvuDQywRR
Date published: 2021-08-23
Is this a leading edge or a trailing edge dimmer?
The dimmer is universal so it is rated for both types of dimming. The dimmer is in FORWARD Phase out of the box for any Leading Edge(TRIAC type) light loads. It can be switched into REVERSE Phase for Trailing Edge(ELV type) light loads.
Date published: 2021-08-16
I have an LED fixture that says it is dimmable with any standard incandescent 120v dimmer. And your literature for this adorne touch tru universal dimmer says it self calibrates. Yet I have a flicker. What do you suggest?
The universal dimmer also has manual adjustments that can be made for flickering depending on the type of LED's it is controlling. All the available user settings are explained in the instructions or you can contact Technical Support and they can help you with them.
adorne products
1.844.957.3783 opt 1, opt 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-05-18
Hi, can I use this dimmer with a shallow box? Thank you
The depth on the dimmer is 1.79" so your electrical box should be at least 2" deep.
Date published: 2021-04-20
I am stumped please help! I have an adorne softTap ADTP703TUW4 in my kitchen on a 3 pole. I am replacing the working existing dimmer. I installed and everything works, however the dimmer does not work. Do i need legrand switch on other end? please help
The Touch universal dimmer and be used with any 3way switch but it does require a separate Neutral wire to work properly. I would contact Technical Support for installation assistance:
Radiant products
1.800.223-4162 opt 3
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2020-10-20
Which light switches don’t require the locator light
All of the electronic adorne switches(Softap, Touch, and Wave) come with the Locator Light included.
Date published: 2020-09-25