





adorne® Motion Sensor Switch, Auto On/Off, White
ASOS32W4
adorne Collection
adorne Motion Sensor Switch Auto On Off is rated
out of
5 by
12.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$58.77 USD
Perfect for pantries, garages or anywhere you want lights to turn on automatically when you enter a room, and turn off again when you leave. The Auto-On/Auto-Off SensaSwitch® provides convenient lighting control by responding to your presence through motion-sensing technology. Use this motion sensor light switch on its own to control a light or fixture from a single location, or pair with additional switches to control a single light source from multiple locations (3 or 4-way applications).
Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
Quantity
In Stock
- Send
- Save as PDF
-
FavoriteFavoriteAdded to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
- Features motion-sensing technology for automatic on/off lighting control. (Auto shut-off can be set from 5 to 30 minutes after vacancy.)
- Usable in single-pole or 3-way applications. Must be paired with another SensaSwitch or SensaDimmer for 3-way control.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a stunning, screwless adorne® Wall Plate, not included. Available in a range of contemporary colors and finishes. Coordinate with other designer switches & outlets.
Specifications
General Info
Product Line | Pass & Seymour | ||
Color | White | ||
UPC Number | 785007023145 | ||
Country Of Origin | China | ||
Features | Motion Sensor | ||
Switch Type | Motion Sensor | ||
Number of Switches | 1 | ||
Standard | cULus |
Technical Information
Connector | Screw Terminals | ||
Number of Gangs | 1 | ||
Number of Poles | Single Pole, 4-Way | ||
Wattage | 600 W | ||
Mounting Type | Box | ||
Sensing Range | 180° 600 sq ft | ||
Voltage | 120 V | ||
Connection Type | Internal Pressure Plates | ||
Sensitivity | Major Motion 35' Minor Motion 20' | ||
Load | Incandescent or LED lamp: 0-600 Watt Fluorescent lamp: 0-600 VA Fan Motor: 1/6 hp | ||
Environmental Conditions | Residential Indoor Use Only |
Resources
Cutsheet
Supporting Document
Installation Instructions
Customer CAD PDF
CAD Drawings
Guide Form Specifications
Sell Sheet
Related Products
Reviews
Rated 5 out of
5
by
Eweneek1 from
Adorne Motion Sensor
Just installed three of the Adorne Motion Senors. They all work perfectly as intended. Two I installed in a guest bath, one controls the chandelier, and the other controls the Panasonic FV-0511VF1 WhisperFit DC motor 50/80/110 CFM Bathroom exhaust fan. The third sensor was installed in the laundry room.
Date published: 2022-10-17
Rated 1 out of
5
by
Jake from
Does not do what its supposed to do
i recently bought this item, it is installed and turns off and on using the manual function but the motion sensor does not work. the wiring is right and it has been let with sufficient time unbothered yet it does not turm the lights on.
Date published: 2019-12-28
Rated 1 out of
5
by
Bill from
This switch works irratically.
When you enter the this switch turns on. Also it turns on multiple times when no one enters the room. I have replaced this switch twice in my house, and it still acts irratically. Whoever engineered this switch needs help.
Date published: 2018-12-09
Rated 1 out of
5
by
NicoleS from
Sensor Switch
Only switched to Adorne sensor for upgraded look with current sensor ( that was working fine). Could not get Adorne to work past test mode.
Had to purchase another ‘on / off ‘ Adorne switch ( without sensor) to finish which worked fine.
Went to website to trouble shoot and section of website was down dealing with the Adorne switch troubleshooting.
Date published: 2019-02-17
Rated 5 out of
5
by
Anonymous from
Love it after 2 years!
When we upgraded most our light switches and receptacles I decided to try one of these for the laundry room. It has been one of my favorite upgrades. It’s just nice to have and live with and I have not had a problem with it. It was installed about 2 years ago.
Come to think of it, I haven’t had any problems with any of our Adorn switches
I will say that occasionally I have to wave an elbow or, make an exaggerated move for it to turn on but I think that could be as much to do with how our laundry room is oriented than any deficiencies in the switch. As far as turning off it has always worked perfectly and I’ve never had it turn on by itself as was mentioned in another review.
I will be adding more so I just wanted to take a minute and give it my recommendation. I almost took one star off for price but for something that has worked, in a sea of junk products these days, I can’t really take off any stars.
Date published: 2022-04-12
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I’m trying to use this Ofe my undercount which I have a Legrand soft touch. Does this have a light sensor so it doesn’t turn on with motion during the day?
You can set the light level on the device to prevent it from turning the load on when there is enough ambient light in the room. You can adjust this using the "Light Level" dip switch on the device itself. Please feel free to call in to Technical Support if you need assistance with this device setting.
Date published: 2023-03-06
I would like to install this motion sensor switch in one location to control two hall lights. Currently there are three switches controlling the two hall lights. Is it possible to install just one motion sensor or do I need to install more than one?
Hello,
The 4-way configuration you have referenced would require, three ASOS32M4 sensors to properly operate your lighting fixture in all switch 3 locations. The adorne® Motion Sensor Switch Auto On/Off is not compatible with traditional 3&4-way adorne switches.
Note from Installation instructions:
ASOS32 provides multi-way control only when used with other ASOS32 devices.
Best Regards,
Technical Support
Date published: 2023-01-27
Do you have any motion sensors for a 12v led circuit.
Hello Chris,
Thank you for your inquiry. Unfortunately, we do no have any sensors rated for 12 volts.
Best Regards,
Technical Support
Date published: 2022-12-08
Want to use this motion sensor with a Panasonic WhisperFit® DC Fan / 50-80-110 CFM model# FV-0511VF1. Fan has a DC motor. Can find no reference converting to HP. Will the two work together?
The adorne motion sensor is rated for AC current only and has not been tested with a DC converter.
Date published: 2022-08-12
Where are the instructions for connecting in a 4-way configuration? The product specifications say it can be used as a 4-way switch, but the installation instructions do not describe that. I need 3 motion sensor outlets working together.
A 4way application using 3 ASOS32's would be wired as follows(both Auxiliary sensors are wired the same):
Master(has LOAD connected)
• Connect NEUTRAL wire from the circuit and from the
lamp (LOAD) to WHITE terminal
• Connect LINE wire to HOT terminal
• Connect LOAD wire to 1-POLE terminal
• Connect TRAVELER wire to the 3-WAY terminal
NOTE: NEUTRAL wire is not required for
sensor to function properly.
Auxiliary 1
• Connect NEUTRAL wire from circuit in the other wiring
box to WHITE terminal
• Connect LINE wire to HOT terminal
• Connect TRAVELER wire to the 3-WAY terminal
• 1-POLE terminal on auxiliary is not used
Auxiliary 2
• Connect NEUTRAL wire from circuit in the other wiring
box to WHITE terminal
• Connect LINE wire to HOT terminal
• Connect TRAVELER wire to the 3-WAY terminal
• 1-POLE terminal on auxiliary is not used
Date published: 2021-09-02
Can i turn this off manually if i wanted to?
Yes, this sensor can be turned off manually.
Date published: 2021-05-05
After testing the switch by putting the trimpot to minimum, the switch now reverts to a shutoff delay of 5 mins even though I have the trimpot moved to the lowest setting before entering test mode again. How do I get lowest delay set?
same here , I did try the test mode with the 5 seconds delay , after it got out of the test mode , still takes about 5 minutes to shut off :(
Date published: 2020-12-04
I Want to know if I do install this in a garage, and let's say I'm working in the garage and switch is not in a view of motion obviously it will trigger "Off" sequence since it does not detect any motion, but my question is can it be manually switched on?
If you want to cover a larger area to keep the light turned on, install two of them, one in each area, wired in parallel. Either one will turn on the light.
Date published: 2020-07-22
Bazaarvoice SAP Hybris Integration Version 2.8.1
You may also like...
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
AWP1G2PW4 | adorne Collection
A crisp profile and clean palette make this wall plate fit for any d�cor or design style.
$12.25
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
ASTM2M2 | adorne Collection
The adorne� Manual-ON/Timed-OFF Motion Sensor Switch allows you to turn lights on when you enter a room and automatically turns them off at a preset time when you leave. Perfect for bathrooms.
$72.32
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
064875 | Pass and Seymour
Turns lights on/off when motion is detected or absent. Part of Smart Lighting with Netatmo.
$68.99
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNAH1W1 | adorne Collection
Creates a robust, dedicated network for the adorne with Netatmo solution. Surface-mount version.
$164.67
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNAL50W1 | adorne Collection
Controls virtually any 120V dimmable bulb from anywhere. Part of the adorne with Netatmo solution.
$123.24