


adorne® 700W Incandescent/Halogen Motion Sensor Dimmer, Magnesium
ADSM703HM2
adorne Collection
adorne 700W Incandescent Halogen Motion Sensor Dimmer is rated
out of
5 by
3.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$81.91 USD
Quantity
In Stock
- Send
- Save as PDF
-
FavoriteFavoriteAdded to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
- For use with dimmable incandescent/halogen bulbs or fixtures. Features manual control (for power and light level), as well as automatic control through motion-sensing technology.
- Usable in both single-pole and 3-way applications.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a stunning, screwless adorne® Wall Plate, not included. Available in a range of contemporary colors and finishes. Coordinate with other designer switches & outlets.
Specifications
General Info
Product Line | Pass & Seymour | ||
Color | Magnesium | ||
UPC Number | 78500702333 | ||
Country Of Origin | China | ||
Features | Motion Sensor | ||
Switch Type | Motion Sensor | ||
Number of Switches | 1 | ||
Standard | cULus |
Technical Information
Connector | Screw Terminals | ||
Number of Gangs | 1 | ||
Bulb Compatibility | Incandescent, Halogen | ||
Number of Poles | Single Pole, 3-Way | ||
Wattage | 700 W | ||
Mounting Type | Box | ||
Sensing Range | 180° 600 sq ft | ||
Voltage | 120 V | ||
Connection Type | Internal Pressure Plates | ||
Sensitivity | Major Motion 35' Minor Motion 20' | ||
Load | Incandescent or LED lamp: 0-600 Watt Fluorescent lamp: 0-600 VA Fan Motor: 1/6 hp | ||
Environmental Conditions | Residential Indoor Use Only |
Resources
Cutsheet
Supporting Document
10 Tips for Your DIY Designer Switches & Outlets Project
pdf
Cleaning Instructions for Wiring Devices
pdf
Meet Your Match
pdf
adorne Bulb Compatibility Chart, ADSM703H
pdf
adorne Collection Dimmer Compatibility Chart
pdf
adorne Product Comparison Chart
pdf
adorne Room Planner Checklist
pdf
View More
Customer CAD PDF
Installation Instructions
CAD Drawings
Guide Form Specifications
Sell Sheet
Related Products
Reviews
Rated 5 out of
5
by
Hil100 from
Looks and works great!
Installed for my under cabinet lighting so it will come on when we are in the kitchen automatically. Several settings available. So stylish too.
Date published: 2018-09-12
Rated 5 out of
5
by
Melanie from
Handy and helpful in home
I am really happy that I bought this product. My kids were always leaving the light on so now I don't have to constantly nag at them and I can enter the room with full hands!
Date published: 2018-04-05
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
How can I , or can I , adjust the motion range to a lesser area ? Directions show Major Motion/Minor Motion , but no steps to adjust.
Hello Brian,
The ADSM703H does not have the ability to adjust the Minor/Major motion coverage range.
Best Regards,
Technical Support
Date published: 2022-12-08
Will this stay on if there's Constant Motion in the Room? And/or can you turn this on Manually? If so, is the Manual like the Push Button Switches that Adorne has?
The motion sensor should keep the light on as long as it is detecting motion and you can et the time delay up to 30 minutes after no motion is present.
The ON/OFF button is a push motion, which is more like the Softap switch because it is an electronic switch.
Date published: 2021-10-08
Is the locator light built into this product?
Yes it is but you will have to have a Neutral wire connected for the switch to illuminate.
Date published: 2021-10-04
What model(s) do you suggest for a motion activated 3-way switch (for top and bottom of stairs)?
They have to used in a pair for 3way applications so ASOS32M4 or ADSM703HM2 are our Auto On/Auto Off sensors you could use.
Date published: 2020-01-15
Which motion sensor model can be used for LED ceiling down lights such as the Lithonia WF4 series
The sensa dimmer is only designed to work with Incandescent and CFL/ LED bulbs. It is not designed to work with Downlights powered by a driver.
Feel free to contact tech support at 1800 223 4185 Option 1
Date published: 2019-06-19
Can I use this to dim CFL fixtures?
The adorne sensor/dimmer(ADSM703HW2) is rated for the following light loads:
SPECIFICATIONS
Voltage - 120VAC, 60Hz
Load (Single Pole or Multi-way)
Incandescent - 15-700 Watt
LED and CFL - 15 - 450 Watt
Date published: 2019-05-06
Can I use this to dim LED lamps? Does this use SRC technology to dim LED lamps?
Thank you for your question. The SensaDimmer is rated for incandescent and halogen lights only. Unfortunately, this is the only dimming occupancy sensor we have in the collection. We do have other LED dimmers in this (see adorne Tru-Universal dimmers) and other collections, but we currently do not have any which use SCR (Silicon-controlled Rectifier) technology. Please let us know if you have any other questions. We're always happy to help!
Date published: 2018-09-29
Bazaarvoice SAP Hybris Integration Version 2.8.1
You may also like...
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
ASVS12M4 | adorne Collection
$58.01
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
AWC1G2SN4 | adorne Collection
$52.76
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
064875 | Pass and Seymour
$68.99
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNAH1M1 | adorne Collection
$180.48
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNAL50M1 | adorne Collection
$135.07