



radiant® 15A Single-Pole Switch, Graphite
TM870GCC10
radiant Collection
radiant® 15A Single-Pole Switch is rated
out of
5 by
51.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$7.61 USD
The perfect upgrade for your basic light switch, the Single-Pole Switch from the radiant® Collection provides on/off control of a light or fixture from a single location, while combining clean lines and smooth paddle action for a sophisticated touch. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.
Quantity
In Stock
Added to Your Shopping Cart
- Send
- Save as PDF
-
FavoriteAdded to Favorites Go to favoritesRemove from favorites?
Features
- Replaces any standard switch with ease.
- Smooth paddle action.
- High-impact resistant thermoplastic construction.
- Side wire terminal screws #12 : #14 AWG solid wire: push wire terminals accept #14 AWG solid cooper wire only.
- Narrow back body leaves more room for wires in the electrical box.
- Captivated mounting screws offer hassle-free installation.
- Coordinate your USB charger with a radiant screwless wall plate.
- For covering patents, see www.legrand.us/patents.
Specifications
General Info
Product Line | Pass & Seymour | ||
Color | Graphite | ||
UPC Number | 785007173697 | ||
Country Of Origin | China | ||
Number of Switches | 1 | ||
Warranty Type | 1-Year Limited Warranty |
Listing Agencies / 3rd Party Agencies
cULus Listed | Yes |
Technical Information
Number of Gangs | 1 | ||
Number of Poles | Single Pole | ||
Mounting Type | Box | ||
Voltage | 120 V, 277 V |
Resources
Supporting Document
Guide Form Specifications
Installation Instructions
Cutsheet
Premium Content
Related Products
Reviews
Rated 5 out of
5
by
lisha123 from
Looks great
15A single pole switch in the color Nickel works great and replacing my current light switch with this one is easy to do. I like that it makes my living room look more modern and sleek. That the buttons to turn on and off the light is very easy to use. It's perfect for my house.
Date published: 2018-08-28
Rated 5 out of
5
by
Gary from
Great nickel rocker switches and outlets
I looked high and low for rocker switches and outlets in nickel. They’re nowhere to be found locally, and the closest I could come to online was ten-packs of each, and I only needed six outlets and five rockers for my kitchen remodel.
Then I thought, “Why not try the source – Legrand?” Sure enough, they had exactly what I was looking for in units of one.
These “Radiant” products are top-notch in my book. They installed about as easily as one can expect from a novice homeowner like myself. And they look great with my nickel faucet, hardware, and other items.
I only wish I was smart enough to order all I needed. After installing I found another outlet needing to be changed out. Oh well, now I’ll need to pay shipping on one more outlet.
And by the way, my shipment came quickly and without any issues
Date published: 2019-10-29
Rated 3 out of
5
by
Jason t from
Good switch but....
Bought enough for most of my house before they started having the name molded into it. Unfortunately now I have to by a inferior brand just to match the rest of my house. Also, where the name is molded give a place for dirt to accumulate.
Date published: 2018-09-29
Rated 1 out of
5
by
Denisvh from
Junk
I bought a box of these switches at my local big box hardware store (only brand they sell). I have a twenty year old house and a few of the originals are cracked and showing their age. These switches look nice but are NOT made well. Three of the new switches cracked within a week. One of them as I was testing it; on,off,on,off,cracked. I’ve replaced a lot of switches in 40+ years of home ownership, and never had this kind of problems before.
Date published: 2020-05-17
Rated 5 out of
5
by
Hazzcomm555 from
Great devices
Love the Radiant Collection & Screw-less trim plates.
Date published: 2019-01-05
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What is the torque spec for using the side plates?
The required torque for the terminal screws is 14 to 18 inch pounds.
Date published: 2022-02-18
Is TM870W LED compatible?
Yes, the TM870W is rated to handle ALL types of light loads.
Date published: 2022-01-04
what does a blinking red light mean?
The TM870W does not have any type of illumination built in so I would suggest contacting Technical Support to verify the model number and the correct installation on the device you have.
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-08-09
Are these designed so you can attach 2 wires on the "external screw-pressure-plate" or are they only designed for 1 wire? Its the radiant paddle switch 3 way 15A.
You can attach two wires to the external screw-pressure-plate of the Radiant switches.
Date published: 2021-08-09
The black Legrand switches and outlets look like a dark gray matte finish which is nice, but I read a review that said they look nothing like the pictures and that they were actually a semi gloss or shiny black black. Can you confirm the actual color.
Mine were matte black. Not shiny at all.
Date published: 2021-08-09
Can you tell me when you think you would have these black Legrand 15 amp rocker switches back in stock.
The TM870BK switch is currently in stock and can be purchased through any Legrand retail/distributor.
Date published: 2020-07-01
I have exterior outlets that are switched from the inside. I'm trying to find a 20AMP switch in the Nickel color from LeGrand so I won't have worries to too much draw thru the switch. Being outdoor outlets, you could imagine plugging power tools in.
Here's what I would recommend. Use this 15 amp switch and install a 15 amp rated outlet outside.
Most of the time, if you need 20 amp service to an outlet, switching it is not done. This is pretty abnormal.
Our house uses 12 gauge wire (rated for 20 amps) everywhere, even with 15 amp outlets and 15 amp switches, but our breaker is 20 amp. The electricians did this since the wiring of the outlets and switches can carry 20 amps through it's terminals, but the 15 amp outlet won't allow any 20 amp devices to plug in. Since we have 20 amps per circuit, we can use up to 20 amps across multiple outlets, but not at one individually.
It's odd that your house would have a 20 amp switched outlet, since most switched outlets are for lights. If you expect to use a power tool, you can remove the switch and wire the circuit together with wire nuts, or you can run an additional 20 amp suitable wire (such as 12 gauge) from your switch box to some new outlets outside.
Date published: 2021-08-09
Can you please confirm the switch is OK for use with 220V/50Hz?
The frequency doesn't matter. Switches like this are just a solid contact, no other tech inside them. Max voltage or current flowing through the switch is all you should worry about.
Date published: 2021-08-09