radiant® Single Pole 3-Way Occupancy Sensor, Tri-Color
RRW600UTC
radiant Collection
radiant® Single Pole 3-Way Occupancy Sensor, Tri-Color is rated
out of
5 by
11.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$33.39 USD
Simplify control while saving energy, with the radiant® Occupancy Sensor. Automatically turning the light on when someone enters a room, and shutting it off when the room is empty, this sensor includes an adjustable timed delay for shut off, as well as additional settings for more flexible control. Part of the radiant® Collection, it features clean lines and smooth paddle action for a sophisticated touch. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.
Quantity
In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Passive infrared (PIR) sensor switch technology with 180° coverage up to 600 sq. ft. Rated for up to 600W (5A) of LED lighting.
- Works with virtually any bulb/fixture, including: LED, incandescent, fluorescent, compact fluorescent (CFL), magnetic low-voltage (MLV) and electronic low-voltage (ELV), 1/6 hp.
- Turn the light on when you enter, and let it turn itself off automatically after you leave for true convenience. Perfect for bathrooms, hallways, closets, garages, and more.
- Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
- Features an adjustable time delay to off after no motion is detected. Delay settings range from 30 seconds to 20 minutes after the room is vacated (default 5 minute delay).
- Auto ON/Auto OFF functionality as default. Easily configurable to Manual ON/Auto OFF to meet any need or preference in the home.
- Replace any basic light or fan switch in 15 minutes or less. Supports single pole and multi-location installs. No neutral required.
- Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
Specifications
General Info
| Product Line | Pass & Seymour | ||
| Color | Ivory, Light Almond, White | ||
| Finish | Matte | ||
| UPC Number | 785007496598 | ||
| Country Of Origin | China | ||
| Features | Motion Sensor | ||
| Switch Type | Motion Sensor | ||
| Application Sector | Residential | ||
| Standard | cULus | ||
| Type | Switch |
Dimensions
| Product Width US | 1.69 in | ||
| Product Depth US | 1.88 in | ||
| Product Height US | 2.63 in |
Listing Agencies / 3rd Party Agencies
| cULus Listed | Yes |
Technical Information
| Target Size | 180 deg | ||
| Response Frequency | 60 Hz | ||
| Sensor Type | Occupancy | ||
| Amperage | 5 A | ||
| Number of Poles | 3-Way, Single Pole | ||
| Wire Size | #14 - #10 AWG | ||
| Requires Neutral Wire | No | ||
| Indoor/Outdoor | Indoor | ||
| Wattage | 600 W | ||
| Mounting Type | Box | ||
| Voltage | 120.0 V | ||
| Sensitivity | 60Hz | ||
| Environmental Conditions | Indoor Use Only |
Resources
Installation Instructions
Brochure
Supporting Document
Sell Sheet
Guide Form Specifications
Product Image
Premium Content
Reviews
Rated 1 out of
5
by
tarded from
Super frustrating.
I've spent 4 hours and no luck. There are no instructions on how to wire as a 3 way switch. If I could give it 0 star I would. Waste of my time and money.
Date published: 2020-05-13
Rated 4 out of
5
by
Larry Word from
Works great
Hooked it up in my closet and it works great. After realizing the ground is not a wire but green screw attached to the side I hooked everything right up and it worked great
Date published: 2019-04-30
Rated 5 out of
5
by
Matt from
Works great after a little learning curve.
Some of the reviews are complaining about the instruction but really the switch operates well. The wiring was simple after turning off the breaker, and my garage lights stay on for 5 minutes at a time. I replaced an annoying lutron motion sensor switch with this Legrand and it works much better. Thanks.
Date published: 2020-05-15
Rated 1 out of
5
by
Matt from
Worked well… until it didn’t
Installed per instructions for a single pole light and was working flawlessly. Then after a couple of weeks, it just would not turn the light on. All I got was the led enable light to blink 3 times, but nothing in the instructions to help specifically troubleshoot. Verified all wires were connected and the blue/white wire was connected to ground. Still couldn’t get it to work…
Date published: 2024-02-11
Rated 3 out of
5
by
gking from
poor instructions
terrible instructions. very hard to understand. fortunately I have some electrical knowledge and was able to find some better instructions on some other sites.
Date published: 2021-08-30
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Does this switch come in light almond? It looks like the package comes with 3 interchangeable colors.
Hello,
The RRW600UTC will included a white, light almond and Ivory interchangeable plate.
Best Regards,
Technical Support
Date published: 2023-02-23
I had this sensor installed in the garage by the electrician that installs all my Legrand Adorne switches in the house (original wifi and new netatmo). He's followed all instructions for 3-way install, the lights flash on for a second then turn off. Why?
Hello,
Sorry to hear about the problems you're having with this sensor and wiring this in a 3-way with a standard switch is not typical. I would suggest calling us and we can see if we can get it working or have it replaced.
Thank you,
Contact Information
Legrand Pass & Seymour Contact information:
Phone #: 844-957-3783 - Option 1, followed by option 2 for Technical Support.
Monday - Friday | 8:00am - 6:00pm Eastern Standard Time (excluding
Date published: 2022-11-15
In a 3-way installation (with a companion 3-way occupancy sensor), how is the on/off button supposed to work? Currently, I have two sensors (one master, one remote) installed on the same 3-Way circuit and the on/off button will only turn off the lights.
Hello JeepGuy481,
Please give Technical Support a call so that we can further review your electrical wiring setup.
legrand Contact information:
Phone #: 844-957-3783 - Option 1, followed by option 2 for Technical Support.
Monday - Friday | 8:00am - 6:00pm Eastern Standard Time (excluding holidays)
Best Regards,
Technical Support
Date published: 2022-10-13
Are these lights able to be set so that when I walk in the room they turn on ? I believe that’s occupancy mode however my switches are not allowing me to change the setting off manual per the instructions. Can you help ?
The RRW600UTC can be put into Auto-On mode(occupancy) by holding the button for 15 seconds, then press on/off button until you get to one blink on the led. You can contact Technical Support if you still need assistance with the programming.
The RRW600VTC is Vacancy mode only(manual on).
Radiant products
1.844.957-3783
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2022-10-13
Is there a interchangeable faceplate in black?
We do not have a face kit in Black but we do have it in Graphite:
RRW600FPG - RADIANT OCC/VAC FACEPLATE GRAPHITE
Date published: 2022-02-15
How do I adjust the time delay?
With the load ON or OFF, hold down the ON/OFF button for 10 seconds then release. LED will blink 5 times and then turn off . Enters Time Delay Adjustment Mode and the number of blinks indicates what the time delay is set at.
1 blink - 30 seconds, 2 blinks - 5 minutes, 3 blinks - 10 minutes, 4 blinks - 15 minutes, 5 blinks - 30 minutes.
You can change the time delay by pressing and releasing the ON/OFF button and it will cycle through the different time options. Once you have your time set, press and hold the ON/OFF button for 10 seconds
See attached Time Delay Table
Date published: 2023-12-16
The switch I removed had a red, black, brown and green wire this has a red,black, green & blue/white. I put the blue white to the ground it works but light comes on with no motion. Outlet in series test bad ground.
I would suggest contacting our Technical Support group to discuss the proper wiring schematic for this sensor:
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2022-12-11
Follow-up to previous question: Also found that if I turn load OFF at regular 3-way switch, I cannot turn it ON from sensor. I hear a faint click and locator LED dims slightly, but LED does not go out and load does not turn on. Have to turn on from 3-way.
Same response....Please check your wiring to case 3 or 4 on the attached file. If it's still not working correctly, contact Technical Support at:
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2022-12-11
Using sensor w/ regular 3-way switch, wired per instructions. After turning off light from sensor switch, if I flip the standard 3-way, nothing happens. Flip it AGAIN, then the load turns on. Any ideas?
Please check your wiring to case 3 or 4 on the attached file. If it's still not working correctly, contact Technical Support at:
Radiant products
1.844.957-3783 opt 1, then 2
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2022-12-11
Also, can these sensors be installed in a 4 way setup, but only using 1 or 2 sensors instead of all 3?
Three sensors would have to be used for a 4way applications.
Date published: 2021-11-10
I have wired two sensors together in a 3- way. It works OK, but it seems like if I'm in one area (near just 1 sensor), the other sensor will turn the light off because it hasn't detected motion during the time delay. Is this a known issue?
I would confirm that both sensors have their time delays set for the same length of minutes.
Date published: 2021-11-10
I had to install these for code but I need a way to turn the sensor off, so I can press to turn on but it won't turn on by itself. Can you help?
The RRW600U does not have an override on the sensor but you can extend the time delay up to 30 minutes.
Date published: 2021-10-22
Hi, I am confused by the instructions on the existing 3 way switch. Am I supposed to: 1. Leave the runner wire attached. 2. Ground one of the poles on the switch. 3. Cap off remaining wire? Can you provide a diagram or picture? Thanks.
Here the wiring options for the sensor in a 3way, Diagram 3 or 4 are when installing it with a 3way switch and depends on whether the sensor is on the HOT or LOAD side of your 3way.
Date published: 2021-12-03
I'd like to place this sensor above the door, inside the room that I want the lights to be controlled. How does the sensor work? I cannot find detailed specs on it. Will it pick up motion below it?
Hello,
Yes, this sensor will pick up motion slightly below it but designed for installation at approximately 4' from the floor.
Date published: 2021-05-27
how to reset the switch?
Turning off the breaker to the sensor will do a hard reset on it:
There is an initial warm-up (about 1 minute) and calibration period the first
time power is applied to the unit and after the load is replaced. The warm-up
sequence also occurs as a result of a power failure, and any time power to the
unit is cycled.
Date published: 2021-05-18
Will the switch go during the day with motion if room is already illuminated by sunlight?
Yes, this sensor does not have ambient light level detection.
Date published: 2021-04-26
I am looking for one of these but in 277V
PW301W is a PIR multi-way sensor that is rated for 120V or 277V.
Date published: 2021-03-05
What is the correct way to wire two of these switches as a 3-way circuit. Switch one will be the power source, with a three wire cable going to the next switch and then two wire cable going to the light.
The RRW600U sensors are electronic devices so both of them need power(black wire) and only one(master sensor) also has load connection(light - red wire). The yellow traveler wire is connected between the two sensors(as shown in diagram).
Radiant products
1.800.223-4162 opt 3
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-02-10
I can get my switch into Time Adjustment mode by holding down the on/off button for 10 seconds, but I can't get to Working Mode by holding for 15 sec or LED mode for 25 sec. Is there something I'm missing here?
It was the ground. It somehow lost the ground when I moved it. They will not work without ground.
I found an excellent manual that is very clear. Look up Lagrand Radiant RRW600u manual
It is simply a switch for Hot, but needs a ground.
Date published: 2021-02-09
My Lagrand was working fine. I moved it to a location on my stairwell that will make it work sooner. I lengthened the wire about 18". Red to load and black to hot. It is grounded. LED not on. hold on off 10 seconds 15 seconds 25 seconds, nothing.
I would suggest contacting Technical Support for troubleshooting assistance:
Radiant products
1.800.223-4162 opt 3
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-02-08
Is the interior of the motion sensor cover accessible such that you can insert tape to reduce the area of coverage (vs. taping the outside which is not as aesthetic)?
Yes, the device comes with 3 interchangeable color facekits so they are removable if you want to mask part of the lens.
Date published: 2021-01-18
If I want to reduce the degrees of detection for a stairway (so it only comes on when someone starts up the stairs vs. everytime one passes by the stairs), can I use white electrical tape to partially cover the sensor?
Masking part of the lens is an acceptable way of reducing the detection range.
Date published: 2021-01-15
Any way to 'manually' turn on the switch and not have it time out and turn off. I've installed it in my garage and love the way it works until I'm under the hood of a car and the lights go off!
The sensor does not have a permanent override on it but you can extend the time delay up to 30 minutes.
Date published: 2021-02-02
Why did the designers of this model remove two of the most valuable features, the ability to turn the load off in any setting, and the ability to fine tune the delay to two minutes? Is there a model that still has these capabilities?
Our current sensors have set time delays, which go from 30 seconds and then to 5 minutes and you should be able to turn the load off whenever needed.
Date published: 2024-09-28
I have a bluetooth bathroom exhaust fan (no light just fan) I'm running new wiring throughout the bathroom. Can I use this sensor
Yes, the sensor just requires 120V circuit and it must be Grounded.
Date published: 2020-08-28
Will the model RRW600UTCCCV4 control one or two CFL fixtures in 3 way mode? All the documentation online does not say. The packaging makes is seem as though the switch will only work with an led. Afraid to open if I'm going to need to return.
The sensor is designed to handle ALL LOADS as long as you do not exceed the maximum wattage rating of 600W's.
Date published: 2020-08-05
Can we please get some clear, explicit clarification of ALL wires in a 3-way circuit? Please include all three colored wires on the Legrand unit, as well as building wiring (for those of us used to standard 3-way wiring).
Please see the attached wiring diagrams and you can contact technical support if you need further assistance.
Radiant products
1.800.223-4162 opt 3
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2021-05-19
Wiring 3-way, does each switch maintain ON according to its own programming, independent of other switches? Or does it work like a standard 3-way, where each switch can turn ON or OFF regardless of other switches? -->I need to maintain ON independently.
Either sensor in the 3way will turn the load ON and it will remain ON as long as motion is detected by either sensor.
Date published: 2024-03-28
Does this switch sense daylight so the light will not turn on?
No, this sensor does not have ambient light detection feature.
Date published: 2021-01-23
How do I reprogram the RRW600U?
A link to the instruction sheet is attached and you can reference Table 1 to program the time delay and Table 2 for occupancy and vacancy mode programming:
https://www.legrand.us/-/media/brands/radiant/resources/installation-instructions/radiant%20120v%20single%20pole%20occupancy%20sensor.ashx
You can also contact if you need assistance with it:
Radiant products
1.800.223-4162 opt 3
Mon - Fri: 8am - 8pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2020-10-10
Bazaarvoice SAP Hybris Integration Version 2.8.1
You may also like...
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
064875 | Pass and Seymour
Turns lights on/off when motion is detected or absent. Part of Smart Lighting with Netatmo.
$68.99
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNRH1LA | radiant Collection
Creates a robust, dedicated network for the radiant with Netatmo solution.
$102.63
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNP20 | Pass and Seymour
Plug it in and start dimming lights from anywhere. Part of the radiant with Netatmo solution.
$64.96