
Industrial Extra Heavy Duty Specification Grade Switch, Lighted When On, Back and Side Wire, Red
PS20AC1RPL
Pass and Seymour
Bazaarvoice SAP Hybris Integration Version 2.8.1
1-Pole Pilot Lighted Switch, Back and Side-Wire, 20A 277V
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- External screw-pressure-plate back and side wired. Accepts #14 - #10 AWG copper or copper-clad conductors.
- Heavy-gauge one-piece copper alloy contact arm virtually eliminates contact bounce.
- Cam controls fast ''make'' and positive ''break'' to minimize arcing.
- Heavy-duty bumper pads for quiet operation.
- High strength thermoplastic polycarbonate toggle.
- Back body made of glass-reinforced nylon.
- Locking support provides resistance to face and back body separation.
- Oversized silver alloy contacts for long life and better heat dissipation.
- Grounding terminal is standard.
- Shallow design for ease of installation.
- Strap nickel-plated steel with integral ground.
- Auto-ground clip assures positive ground.
- For covering patents, see www.legrand.us/patents.
- For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Specifications
General Info
Product Line | Pass & Seymour | ||
Color | Red | ||
UPC Number | 785007195842 | ||
Country Of Origin | Mexico | ||
Application Sector | Industrial | ||
Standard | UL 498/20 |
Listing Agencies / 3rd Party Agencies
cULus ListingNumber | 140597 | ||
cULus Listed | Yes |
Technical Information
Actuator | Toggle | ||
Contact Rating | 20Amp, 120Vac | ||
Amperage | 20 A | ||
Action | Single pole | ||
Number of Poles | Single Pole | ||
Voltage | 120 V |
Resources
Supporting Document
Sell Sheet
Guide Form Specifications
BIM Models
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
does the pilot only illuminate when in on position?
Yes, a "pilot" lighted switch is lit when the circuit is ON.
Date published: 2022-08-25
I just purchased two of these switches PS20AC1RPL. Can they be used as 3-way switches? And if so, will both pilot lights be lighted when on?
The PS20AC1RPL is single pole only. You need the PS20AC3RPL's and both Pilot lights would work in a 3way.
Date published: 2022-01-13
DOES THIS SWITCH NEED TO HAVE A NEUTRAL WIRE FOR THE LIGHT TO WORK?
Good Morning,
Yes, it does. Almost all pilot lit switches (lit when on) need a neutral.
Hope this helps!
Date published: 2019-12-26
are these motor rated switches?
Yes, the 20A switch is rated for 1HP on 120V and 2HP on 240/277V circuits.
Date published: 2020-02-07
For your part number 30AC1-I, what is the tightening torque requirements?
The required torque for the terminal screws, to include all Pass & Seymour Receptacles is 14 to 18 inch pounds.
Date published: 2020-02-07
Bazaarvoice SAP Hybris Integration Version 2.8.1