|Country Of Origin||China|
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Hi. I recently bought a P5050 player but during the procedure i didn't add all the three zones and finish the setup procedure. Can you help me how to factory reset the player and start the setup one again. Thanks in advance!
If you didn't finish the setup and one or more of the zones are still green (indicating defaulted) you don't need to default the system, you can just add the remaining zones by going to the Nuvo App and tapping the settings gear, then "Add a Component". This will walk you through adding the other zones as in the original setup. Should you need to default the zones completely there are two methods depending on hardware revision. Try pressing and holding Zone 1's connect button for 15 seconds. The zone light should go out, blink green shortly, then blink white. Once defaulted the zone will go solid green. Repeat with the remaining zones. If that doesn't reset it to default (green lights) then try the standard method. Power the unit down. Power it back on. As soon as any light shows on the zone buttons, immediately press and hold the connect buttons until the zone lights turn green, then release. They will blink green 3-5 times, then blink white. Once complete the zones will be solid green indicating a default state.
Date published: 2021-07-06