text.skipToContent text.skipToNavigation
  1. Home
  2. Lighting Controls and Systems
  3. Digital Lighting Management
  4. Personal Controls

Discontinued - DLM Dimming Wall Switch, 1 paddle, w/IR, Red

LMDM-101-R Wattstopper
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 17ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;


The LMDM-101 Digital Dimming Wall Switch is a low voltage device for dimming control of one or more lighting loads. It is part of a Digital Lighting Management (DLM) system and can dim load(s) connected to DLM dimming room controllers and switch load(s) connected to DLM on/off room controllers.
Color Red
BAA No
  • Send
  • Save as PDF
  • Add to favorites Remove from favorites
Features

Features

  • Low voltage switch for control of dimmable loads
  • Plugs to other components using Cat 5e cable and RJ45 connectors eliminating wiring errors
  • LED bar graph indicates relative light level of controlled load
  • Active Dim feature enables temporary adjustment of any selected load
  • IR transceiver for wireless configuration and remote control
Specifications

Specifications

General Info
Color Red
Product Series LMDM
Type Dimmer, Switch
Application Sector Commercial
Product Line Wattstopper
Country Of Origin China
Number of Switches 1
Switch Type Push
Warranty Type 5-Year
UPC Number 754182933150
Dimensions
Product Depth US 1.6 in
Product Height US 4.1 in
Product Volume US 11.8 cu in
Product Width US 1.8 in
Product Weight US 0.2 lb
Additional Information
RoHS Compliant Yes This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
Technical Information
Current Draw 5 mA
Number of Connections 2
Number of Rockers 0
Wire Connection Type RJ-45
Compatibility DLM Wired
Has Battery No
Indoor/Outdoor Indoor
Input Voltage 24 VDC
Mounting Type J-Box
Number of Buttons 1
Operating Temperature 0°-55°C, 32°-131°F
Operating Temperature Max 55 °C
Operating Temperature Min 0 °C
Operating Humidity 5-95% RH (Non-Condensing)
Engraving Type Blank
Resources
Reviews

Reviews

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 4ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Questions & Answers

Questions & Answers

I need instructions for how to set the switch to motion sensor. Ours at work keeps getting taken out of motion mode so that the lights are always on and have to be manually turned off and then on again.

Asked by: Caroline
The LMDM-101 is a dimmer switch within the DLM system and does not have built-in motion-sensing capabilities. The motion detection in your space is likely controlled by either a ceiling-mounted or wall-mounted sensor. Adjusting the sensor’s settings can be done manually, using the LMCT-100-2 remote, or through a laptop with LMCS software and the LMCI-100 adapter. The exact programming steps will depend on the method used, so reaching out to Wattstopper Technical Support would be the best way to get instructions tailored to your specific setup.
Answered by: Tier 1 Tech Support
Date published: 2025-02-17

What is the replacement for the EOSW-101-W?

Asked by: Dave
The most suitable replacement for the EOSW-101-W switch is the Wireless Digital Lighting Management (DLM) product line.
Answered by: Tier 1 Tech Support
Date published: 2025-02-10

We are using the LMDM-101 for dimming control on a hallway circuit. We need a switch for the other end of the hall that is not dimming capable but works within this system. Cat5 control to the ceiling Power Pack. LMRC-211.

Asked by: Adam
For your application, the LMSW-101 momentary switch is a good solution. It is compatible with the LMDM-101 dimming switch, providing a non-dimming, functional switch for the opposite end of the hallway. The LMSW-101 is a decor-style momentary switch that can work within your system by using Cat5 control to the ceiling Power Pack (LMRC-211). It will allow you to control the circuit without affecting the dimming functionality, making it a suitable choice for your setup.
Answered by: Tier 1 Tech Support
Date published: 2025-02-03

I'm looking for a replace switch, Model LMDM-101. What's the replacement?

Asked by: Steve
The LMSW-211 or LMSW-222 are the replacements for the LMDM-101
Answered by: Justin
Date published: 2025-01-23

My lights keep turning off when I'm working in the office alone. Is there any way to just keep them on like a regular lightswitch?

Asked by: Mark
The LMDM is not a motion sensor, you likely have a ceiling sensor in your space. There is a way to disable the sensor if you like. Please contact Wattstopper Technical Support at 800-879-8585 for further assistance.
Answered by: Justin
Date published: 2024-11-16

I have (2) of these switches in grey i want to change them to White. Is there a kit that i can change the faceplates out for white?

Asked by: Liza
Hi Liza, We do sell a color change kit, the part number is LMDM-KIT-101-W
Answered by: Tier 1 Tech Support
Date published: 2024-10-19

my lights go on and off way too much, is there a way to adjust the sensitivity?

Asked by: Anonymous
The product you selected does not control sensitivity. If you have a motion sensor connected to your system the sensitivity can be adjusted there
Answered by: Justin
Date published: 2024-01-26

Can the trim be adjusted? Lights are slim panel leds and are still pretty bright at the current lowest setting.

Asked by: Chris
High and low trim can adjusted via load configuration programming in the DLM system.
Answered by: Tier 1 Tech Support
Date published: 2024-01-22
  • y_2025, m_5, d_1, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_LMDM-101-R, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 28ms
  • QUESTIONS, PRODUCT
Back to Top