Contact Input Station - 10 Channel (DIN)
CIS10-DIN
Vantage
Bazaarvoice SAP Hybris Integration Version 2.8.1
The WireLink DIN Contact Input Station provides a single integration point for a large variety of sensor inputs and external switches from third-party systems. Each station features ten contact input channels for monitoring the open and close states from a variety of external devices. These devices include magnetic door contact switches, momentary switches, motion detectors, smoke and carbon monoxide detectors, driveway probes, and more. Input 9 can also be used to receive input from Vantage’s external IR receiver. Input 10 can be used for the Vantage LighPoint sensor. It can be easily installed on standard 35mm DIN rails. The stations communicate with the controller through a WireLink two-wire bus. Each station can quickly become part of Vantage’s powerful scene orchestration capabilities with user friendly programming software.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Product Details
The WireLink DIN Contact Input Station provides a single integration point for a large variety of sensor inputs and external switches from third-party systems. Each station features ten contact input channels for monitoring the open and close states from a variety of external devices. These devices include magnetic door contact switches, momentary switches, motion detectors, smoke and carbon monoxide detectors, driveway probes, and more. Input 9 can also be used to receive input from Vantage’s external IR receiver. Input 10 can be used for the Vantage LighPoint sensor. It can be easily installed on standard 35mm DIN rails. The stations communicate with the controller through a WireLink two-wire bus. Each station can quickly become part of Vantage’s powerful scene orchestration capabilities with user friendly programming software.
- Provides a single integration point for up to ten contact inputs
- Allows seamless integration with most PIR motion detectors, door contacts, light sensors, smoke and carbon monoxide detectors, and more
- Clips easily on standard 35mm DIN rails
- Accepts programming using Vantage's InFusion Design Center or QLink software
- Connect to the system via WireLink (wired) or RadioLink (wireless)
- Two connections for a Vantage external IR Receiver and LightPoint Sensor
- Plug-and-play design for tool-free replacement
Specifications
General Info
| Color | Black | ||
| Product Type | Load Controller | ||
| Application Sector | Commercial, Residential | ||
| Product Line | Vantage | ||
| Country Of Origin | China | ||
| Installation Location | Enclosure | ||
| Warranty Type | 5-Year | ||
| UPC Number | 804428120735 |
Dimensions
| Product Depth US | 2.4 in | ||
| Product Height US | 3.0 in | ||
| Product Width US | 5.0 in | ||
| Product Weight US | 0.65 lb |
Technical Information
| Compatibility | InFusion | ||
| Indoor/Outdoor | Indoor | ||
| Mounting Type | DIN Rail | ||
| Operating Temperature | 0°-40°C, 32°-104°F | ||
| Operating Temperature Max | 104 °F | ||
| Operating Temperature Min | 32 °F |
Resources (2)
Cutsheet
Installation Instructions
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Q & A
When using with 3rd party switches, requesting cat6 cable as preferred wiring, how would this intergrade with the contact station? Is there an adapter that could allow connections to work together?
No, there’s no direct integration between a CIS10‑DIN and a standard device using Ethernet. The CIS10‑DIN is a dry contact input device, not a network/IP device, so it doesn’t communicate over Ethernet.
Date published: 2026-06-02
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMRC-212-U | Wattstopper
LMRC-210 Series Digital Room Controllers include one, two or three relay(s) to switch a total of 15 or 20 amps, a highefficiency switching power supply and one 0-10 volt output per relay for control of dimmable loads including electronic ballasts (Advance Mark 7, or equivalent).
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
BACNET-IP-IC | Vantage
The controller is the main brain of the system and is capable of supporting all Wattstopper user interfaces, including Equinox touchscreens.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMPL-111-20M-U | Wattstopper
The LMPL-111-20M Plug Load Controller contains a 20 amp relay for on/ off control of connected outlets, and a highefficiency intelligent switching power supply.

