Discontinued - DLM 1-RELAY ROOM CONTROLLER 0- 10V 16A METERED USA
LMRC-111-16M-U
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
Replaced by LMRC-111-20M-U
LMRC-111-16M room controllers include one relay capable of switching a 16 amp load, a high-efficiency intelligent switching power supply and both Class 1 and Class 2 0-10 volt outputs for control of dimmable loads including compatible LED drivers or electronic ballasts. Room Controllers are the foundation of a Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient control.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Plenum-rated controllers with line voltage relay and 0–10 volt dimming output
- Knockout mounting for easy installation; Class 1 and/or Class 2 connection for 0–10V wiring
- Advanced real time metering of voltage and current (+/- 2% accuracy)
- Plug n’ Go™ automatic configuration for quick installation and maximum energy efficiency
- Store 16 scene preset levels for each load
- Over-current protection: relay closes to prevent device damage in an over-current situation.
- Supports energy saving manual-on, partial-on and dimming control strategies
Specifications
General Info
| Color | White | ||
| Product Series | LMRC | ||
| Type | Room Controller | ||
| Finish | Glossy | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | United States | ||
| Replaced by Part Number | LMRC-111-20M-U | ||
| Installation Location | Ceiling | ||
| Warranty Type | 5-Year | ||
| Standard | UL 924, UL 60730, UL 2043, cUL, FCC part 15, PEP, RoHS 2011/65/EC, ISO 14025:2010, ISO 14001, BAA, TAA | ||
| UPC Number | 754182944248 |
Dimensions
| Product Depth US | 2.0 in | ||
| Product Height US | 4.4 in | ||
| Product Volume US | 44.6 cu in | ||
| Product Width US | 3.9 in | ||
| Product Weight US | 0.6 lb |
Additional Information
| Security | Yes | This product is ioXt certified | |
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Current Draw | 16 A | ||
| Number of Connections | 4 | ||
| Topology | Free Topology | ||
| Wire Connection Type | RJ-45, Terminal Block | ||
| Dimming Compatibility | 0-10 V | ||
| Compatibility | DLM Wired | ||
| Has Battery | No | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 120/277 VAC | ||
| Line Frequency | 50 Hz, 60 Hz | ||
| Location Rating | Dry | ||
| Mounting Type | 1/2 in Knockout, 4 in Deep J-Box | ||
| Number of Relays | 1 | ||
| Operating Temperature | 0°-65°C, 32°-149°F | ||
| Operating Temperature Max | 149 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Output Voltage | 24 VDC | ||
| Storage Temperature | 23° - 176° F |
Resources
Cutsheet
Installation Instructions
CAD Drawings
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can this be used with 2 switch locations and multiple Ocupancy Sensors?
Yes... A DLM Room Controller is capable of interfacing with multiple switches and sensors. Please note that the DLM device limit, inclusive of the controller, is 48 devices.
Date published: 2024-07-29
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMDW-KIT-101-B | Wattstopper
The LMSW-KIT-100 Series, LMDW-KIT-100 Series, LMPW-KIT-101 Series, LMDM-KIT-101, LMDM-KIT-601, and LMSW-KIT-605 are replacement button trim color kits that are compatible with all Digital Lighting Management (DLM) LMSW Switches, LMDW and LMPW Wall Switch Sensors, and LMDM Dimming Wall Switches.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
576-120-014 | Quiktron
Q-Series Patch Cords, CAT6, booted, Gray