text.skipToContent text.skipToNavigation

DLM Dual Tech Ceiling Mount Sensor V4, White, USA

LMDC-100-U Wattstopper
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 29ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

The LMDC-100 low profile Dual Technology Ceiling Mount Occupancy Sensor uses both passive infrared (PIR) and ultrasonic technologies to achieve precise occupancy sensing for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a Wattstopper Digital Lighting Management (DLM) system.

Color White

Features

  • Plug n’ Go™ automatic configuration for quick installation and maximum energy savings
  • Push n’ Learn™ functionality for customization without the need for tools or a PC
  • Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
  • Infrared (IR) transceiver for wireless configuration and control
  • Ultrasonic diffusion technology spreads coverage to a wider area (patented); 40KHz signal
  • 360 degree PIR coverage
  • Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI

Specifications

General Info
Product Line Wattstopper
Color White
UPC Number 754182927647
Country Of Origin United States
Additional Information
Product Environmental Profile Yes

Reviews

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 3ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Questions & Answers

when scrolling through the functions, i do not see the overide function.the lights keep timing out, and i would like to overide this function.

Asked by: Mike R
Hello Mike, Please reach out to our Wattstopper division for further assistance with part number LMDC-100. Wattstopper Technical Support: Phone: 1800-879-8585, Option 1 Mon - Fri: 7am - 7pm CST (excluding holidays) Best Regards, P&S Technical Support
Answered by: Justin
Date published: 2022-10-28

Can the LMDC-100 occ sensor be wall mounted, stairwell application

Asked by: Gerard
If you mount a ceiling sensor to a wall, it will effect the way motion is detected and may not work properly.
Answered by: Legrand Technical Support
Date published: 2022-10-24

hi i ran cat6 cable is that going to affect the installation, or it need to be cat5

Asked by: elvirus
Good morning Any Cat5 or Cat6 cable will work with the DLM installation as long as the cable is a straight thru cable. Although you can use the TIA standard 568A, TIA standard 568B is what I recommend.
Answered by: Tier 1 Tech Support
Date published: 2022-09-15

Where is the .pdf instructions to program the V3 with LCD screen?

Asked by: jon
Good morning To be able to answer your question we will need what the device is you are refering to. It would be best to contact Wattstopper Tech Support at 1-800-879-8585 option#1 for us to gather more information to help help answer your question.
Answered by: Tier 1 Tech Support
Date published: 2022-09-15

I have a LMDC-100 showing E06 & E07 on the lcd display. It seems to over ride the two switches in the room. What are these codes and is there a master rest to get rid of them?

Asked by: William James
These are DLM error codes. E06: No load assigned to sensor, E07: No communication possible(Comm line is being grounded). There is a Cat5 termination issue, and a some programming needed once the Cat5 issue is resolved.
Answered by: Tier 1 Tech Support
Date published: 2022-08-29

Is the LMDC-100 designed to function in low-movement settings such as conference or meeting rooms where people are always seated? Does that affect the installation height? We want to avoid lights shutting off during meetings where there isn't movement.

Asked by: JB
The LMDC-100 is an occupancy sensor. It's main function is to trigger on the load when it detects motion and keep the load on as long as it detects motion. It also will to turn off the load when it doesn't detect a motion after the time delay expires. If someone feels that it may turn off the load because people are not moving it's recommend to set the time delay to 30 minutes which is the maximum. Outside of maximizing the time delay you can put the sensor into override mode which will not allow it to use the time delay, plus the two technologies like the PIR and Ultrasonic within the sensor will no longer function and the sensor will not respond to movement or lack of movement but you will have to use a switch to turn on and off the lights because the sensor is dormant.
Answered by: Tier 1 Tech Support
Date published: 2022-06-13

What is max mounting height above finish floor for the sensor LMDC-100 – U ? We intend to install LMDC-100 – U sensor to a pendant. The bottom of the mounting box is 12'-4" AFF. Is this mounting height acceptable?

Asked by: B254
The maximum mounting height for an LMDC-100 is 10 feet. It is recommended that you use an LMPC-100-5 sensor for ceiling heights from 10-40ft. https://www.legrand.us/lighting-controls-and-systems/occupancy-and-vacancy-sensors/ceiling-wall-mount-occupancy-sensors/dlm-pir-ceiling-mount-sensor-with-extended-height-lens/p/lmpc-100-5
Answered by: Tier 1 Tech Support
Date published: 2022-02-01

Lights won’t turn on or off automatically using this sensor . I am using compatible switch . 

Asked by: Sparky
There may be an issue with the programming. Please contact Wattstopper Technical Support @ 800-879-8585 for troubleshooting assistance.
Answered by: Tier 1 Tech Support
Date published: 2022-08-27
  • y_2023, m_1, d_26, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_LMDC-100-U, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 62ms
  • QUESTIONS, PRODUCT