text.skipToContent text.skipToNavigation

Front and side of Ultrasonic Ceiling Occupancy Sensor, 24VDC, 2000 sq ft, USA

Ultrasonic Ceiling Occupancy Sensor, 24VDC, 1000 sq ft

Wattstopper’s UT-300 Ultrasonic Ceiling Sensors automatically turn lighting on and off based on occupancy. The sensors mount on the ceiling with a flat, unobtrusive appearance and provides 360° coverage.

Footprint 1000 sq ft

500 sq ft
1000 sq ft
2000 sq ft

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Architecturally appealing low-profile appearance
Ultrasonic diffusers give more comprehensive coverage
Accepts low-voltage switch input for manual-on operation
Plug terminal wiring for quick and easy installation
Walk-through mode increases savings potential
Automatic or manual-on operation when used with a BZ-150 Power Pack

Specifications

General Info

Color	White
Product Series	UT-305
Type	Sensor
Finish	Glossy
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	China
Features	Adjustable Time Delay, Indicator Lights, Power Pack Required, Sensitivity Adjustment
Included	Mounting Screws
Installation Location	Ceiling
Warranty Type	5-Year
Standard	UL, cUL, PEP
UPC Number	754182915187

Dimensions

Product Depth US	1.6 in
Product Height US	4.5 in
Product Volume US	44.4 cu in
Product Width US	4.5 in
Product Weight US	0.2187 lb

Additional Information

Product Environmental Profile	Yes
RoHS Compliant	Yes		This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

Current Draw	25 mA
Number of Rockers	0
On Function	Auto On
Wire Connection Type	Terminal Block
Compatibility	BZ Power Packs
Has Battery	No
Indicator	Ultrasonic Detection LED
Indoor/Outdoor	Indoor
Input Voltage	24 VDC/VAC
Mounting Type	4 in Octagonal J-Box, Ceiling Tile, Surface
Number of Buttons	0
Timer Type	DIP Switch
Timer Duration	30 Seconds, 5-30 Minutes
Operating Temperature	0°-55°C, 32°-131°F
Operating Temperature Max	131 °F
Operating Temperature Min	32 °F
Operating Humidity	5-95% RH (Non-Condensing)
Sensing Range	32 x 32 ft
Sensor Type	Occupancy
Sensor Technology	Ultrasonic
Sensor Coverage	1000 sq ft
Sensor Coverage Pattern	360 deg
Sensor Mounting Height	8-10 ft
Ultrasonic Frequency	40 kHz
Storage Temperature	23° - 176° F, -5° - 80° C
Engraving Type	Blank

Resources

Will these updated models work with BZ-150 Power Packs?

Asked by: Anonymous

Yes, this sensor will work with the BZ-150 Power Pack.

Answered by: Justin

Date published: 2024-08-15

Please advise how can we install UT-305-3 as surface mount installation. What accessories do we need for surface mount installation.

Asked by: Mohammed Kazim

Wattstopper does not currently offer a surface mount kit for the UT-305.

Answered by: Justin

Date published: 2024-07-11

The sensitivity control does not seem to be working correctly. Full CCW works but as you turn the control CW, it seems to not work.This unit controls the lights and a exhaust fan.The panel that the unit is on has some vibration from the exhaust fan nearby

Asked by: Leo Schaaf

If the unit is vibrating, I suspect that is the problem. Once you take the sensor out of service mode, the sensor is again active (at varying degrees of sensitivity depending upon how far CW you adjust the trim pot), but due to the vibration, the sensor sees everything moving and will hold the lights ON.