Digital PIR Ceiling Mount sensor

Yes, the LMPC-100 can be configured to dim lights to 50% instead of turning them off when the space is unoccupied by utilizing the “Partial Off” feature. This setting can be adjusted using either the LMCT-100-2 DLM wireless configuration tool or a laptop equipped with the LMCI-100 USB dongle and LMCS (DLM Configuration Software). By enabling and setting the Partial Off level to 50%, the associated load will dim to that level rather than turning off entirely upon vacancy.

The DLM PIR Ceiling Mount Sensor (LMPC-100-5) by Wattstopper is designed to automatically achieve its maximum coverage distance of up to 40 feet, thanks to its precision-engineered Fresnel lens. This lens optimizes the sensor's ability to detect motion across wide areas without requiring manual adjustments or factory settings changes. Once installed, the sensor operates at its full range by default, ensuring consistent performance in detecting occupancy within its specified coverage area.

Yes, you can enable the auto on feature for the motion sensor and have a switch installed as an over-ride. Please reach out to our tech. support team for further assistance is required. Legrand Technical Support: Phone: 1 800-879-8585, Option 3 then Option 1 Mon - Fri: 7am - 7pm CST (excluding holidays)

You can disable the sensor by setting the time to override. This will allow the lighting to work with the switch only. In the DLM system there are ways to schedule a device to not turn off during normal hours and then to operate with motion after hours but this will require other devices. Please contact Wattstopper Technical Support @ 800-879-8585 for more information.