text.skipToContent text.skipToNavigation

Front of 0-10V PIR DROP MT SENSOR BLE LENS -WHITE

Underside of 0-10V PIR DROP MT SENSOR BLE LENS -WHITE

Back of 0-10V PIR DROP MT SENSOR BLE LENS -WHITE

Side of 0-10V PIR DROP MT SENSOR BLE LENS -WHITE

0-10V PIR DROP MT SENSOR BLE 1 20-480V 10FT LENS -WHITE

FSP-321B-D-L2-W Wattstopper

The FSP-3x1B sensors provide continuous dimming light level control based on motion and/or daylight contribution. They control 0-10 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, are rated for wet and cold locations. All control parameters are adjustable via the iOS or Android Sensor Configuration App capable of storing and transmitting sensor profiles. The FSP-3x1B family is available in three configurations for mounting inside a fixture, to the outside of a fixture via a 1/2” knockout, or to a pole.

Color White

Sensor Mounting Height 8 ft

8 ft
20 ft
40 ft

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Designed for LED fixtures and rated for extreme temperatures; options for box or pole mounting
Fully adjustable high and low dimmed light levels
Hold off setpoint with automatic calibration option for convenience and added energy savings
Continuous dimming & daylight harvesting for energy efficiency and energy code compliance
Adjustable via the iOS® or Android® Sensor Configuration App
IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8’ to 40’
Adjustable time delay and cutoff delay

Specifications

General Info

Color	White
Product Series	FSP-3x1B
Type	Sensor
Material	Polycarbonate
Finish	Glossy
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	China
Features	Adjustable Time Delay, Flame Retardant, Impact Resistant, Light Level Sensor, Recyclable, Sensitivity Adjustment, UV Resistant
Included	Collar
Installation Location	Pole
Warranty Type	5-Year
Standard	UL, cUL, CE, TUV Listed, IP66 Rated, RoHS, E101196, PEP
UPC Number	754182941506

Dimensions

Product Depth US	2.419 in
Product Height US	4.058 in
Product Volume US	57.111 cu in
Product Width US	5.818 in
Product Weight US	0.576 lb

Additional Information

RoHS Compliant

Yes

This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

On Function	Auto On
Wire Connection Type	Flying Leads
Compatibility	Bluetooth
Has Battery	No
Indicator	PIR Detection LED
Indoor/Outdoor	Both
Input Voltage	100 to 347 VAC, 208/230/480 VAC
Line Frequency	50 Hz, 60 Hz
Load Rating	1200 W @ 277 VAC, 1200 W @ 347/480 VAC, 300 W @ 230-240 VAC, 800 W @ 120 VAC
Location Rating	Wet
Mounting Type	Drop Nipple, Fixture Embedded
Timer Type	Digital
Timer Duration	30 Seconds, 5-30 Minutes
Operating Temperature	-40°-140°F, -40°-60°C
Operating Temperature Max	140 °F
Operating Temperature Min	-40 °F
Operating Humidity	5-95% RH (Non-Condensing)
Horsepower Rating	1/6 HP @ 120/277 VAC
Sensing Range	44 ft diameter
Sensor Type	Daylight, Occupancy
Sensor Technology	Passive Infrared (PIR), Photosensor
Sensor Coverage Pattern	360 °
Sensor Mounting Height	8 ft
Storage Temperature	-40° - 176° F, -40° - 80° C

Resources

Recently Viewed

12ft Q-Series Cat6a Snagless (UTP) Ethernet Network Patch Cable, CM Rated - Blue

576-A10-012 | Quiktron

Q-Series Patch Cords, CAT6A Shielded, booted, Gray

View Details

DLM Room Controller, 3 Relay, 0-10V Dimming, USA

LMRC-213-U | Wattstopper

LMRC-210 Series Digital Room Controllers include one, two or three relay(s) to switch a total of 15 or 20 amps, a highefficiency switching power supply and one 0-10 volt output per relay for control of dimmable loads including electronic ballasts (Advance Mark 7, or equivalent).

View Details

Yellow clarity shielded patch cord with black connectors

Clarity CAT6A Shielded Patch Cord, 15', Yellow

MCS6A15-04 | Ortronics

Clarity CAT6A Shielded Patch Cords

View Details

Image showing unbooted Q-Series Category 5E Patch Cords by Legrand

Q-Series Patch Cords, CAT5E, Non-Booted, Orange, 3 FT

560-140-003 | Quiktron

View Details

863DPCOM Series Dual Service Floor Box Kit

863DPCOM | Wiremold

Cost-effective solution for power and communication requirements in open space areas

View Details

Front door of Architectural Dimming Panel open

Architectural Dimming Panel - with Controller and Networking

LCAP44H | Wattstopper

The LCAP series of lighting control panels provides modular pre-configured architectural dimming and integration options for a wide range of commercial market applications.

View Details

Front of 0-10V PIR Wall Switch Occupancy Sensor red with plate cover

0-10V PIR Wall Switch Occupancy Sensor, 347V, Red

PW-311-347-R | Wattstopper

The PW-311 passive infrared (PIR) dimming wall switch sensor can turn lights OFF and ON based on occupancy and allow the user to increase or decrease the lighting level.

View Details