DALI 0-10 OUTDOOR PIR SENSOR LO MOUNT KO MOUNT GRAY
FDP-301-L2-TG
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The FDP sensor series allows your lighting fixtures to participate in the internet-of-things (IoT) revolution. This sensor family features bi-directional communication between sensor and driver, enabling connected systems for smarter, more energy efficient and data-driven applications. The FDP sensor series is compatible with with various intelligent drivers including Signify SR or many other connected drivers. By connecting to an intelligent driver, the FDP sensor series does not need its own power supply which will save cost and space inside the luminaire.
Footprint
48 ft
- 48 ft
- 100 ft
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Two lens configurations for mounting heights from 8’ to 40’
- Continuous dimming provides energy code compliance
- Bluetooth Sensor Configuration App allows easy commissioning from ground level
- Stream-lined design for seamless fixture integration
- Manual reset button for security recovery
- IP66 rated housing
Specifications
General Info
| Color | Gray | ||
| Product Series | FDP-301 | ||
| Type | Sensor | ||
| Finish | Glossy | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Features | Adjustable Time Delay, Flame Retardant, High/Low Trim, Impact Resistant, Indicator Lights, Light Level Sensor, Sensitivity Adjustment, UV Resistant | ||
| Installation Location | Fixture | ||
| Warranty Type | 5-Year | ||
| Standard | UL, cUL, E101196, UL 244A, UL 508, IP65 Rated, UKCA, CE, RoHS, FCC part 15 | ||
| UPC Number | 754182940875 |
Dimensions
| Product Depth US | 3.4 in | ||
| Product Height US | 2.6 in | ||
| Product Volume US | 30.1 cu in | ||
| Product Width US | 3.4 in |
Technical Information
| Antenna Pattern | Bi-directional | ||
| Current Draw | 16 mA | ||
| On Function | Auto On | ||
| Wire Connection Type | Terminal Block | ||
| Has Battery | No | ||
| Indicator | PIR Detection LED | ||
| Indoor/Outdoor | Both | ||
| Input Voltage | 12 to 20 VDC | ||
| Mounting Type | Fixture Embedded, Threaded Collar | ||
| Timer Type | Digital | ||
| Timer Duration | 30 Seconds, 5-30 Minutes | ||
| Operating Temperature | -40°-167°F, -40°-75°C | ||
| Operating Temperature Max | 167 °F | ||
| Operating Temperature Min | -40 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Security Method | User Authentication | ||
| Sensing Range | 48 ft diameter | ||
| Sensor Type | Occupancy | ||
| Sensor Technology | Passive Infrared (PIR) | ||
| Sensor Coverage Pattern | 360 deg | ||
| Sensor Mounting Height | 8-15 ft | ||
| Storage Temperature | -40° - 176° F, -40° - 80° C |
Resources
Cutsheet
Data Sheet
Installation Instructions
Supporting Document
User Guides
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Trying to setup an FDP-301. Power is from Dali bus. I see the blue light flash when I press reset. Cannot get bluetooth to connect to iphone. Cannot do device discovery on a known working Dali network.
Thank you for your question. Further information is needed to answer your question properly. Please contact Wattstopper Technical Support @ 800-879-8585 for troubleshooting assistance.
Date published: 2024-09-04
What is maximum device spacing to support bluetooth mesh coverage. None of the collateral seems to state a devicce communication distance beyond the initial programing.
The FDP-301 sensor is a stand-alone device. It does not use Bluetooth communication for anything other than programming. Please contact Wattstopper Technical Support @ 800-879-8585 if you have further questions.
Date published: 2024-04-18
Do you have more info about the Zhaga D4i certification by now?
Please reach out to our tech. support team for further assistance with this question.
Legrand Technical Support:
Phone: 1 800-879-8585, Option 3 then Option 1
Mon - Fri: 7am - 7pm CST (excluding holidays)
Date published: 2023-03-07
We are using your part no FDP-301-L7-TG with 1 to 10V interface. 1. We want to know what is the minimum time time period that must elapsed after motion detection which can be configured. 2. What is time resolution which can be configured?
Good evening,
I you are still needing help from Wattstopper tech support I would recommend contacting Wattstopper at 1-800-879-8585 option#1.
Date published: 2022-06-21
Hello - Will this product be certified by Zhaga-D4i? If yes, when?
We do not have any information available on Zhaga-D4i certification implementation at this time. This will be updated as more information becomes available.
Date published: 2022-04-13
Bazaarvoice SAP Hybris Integration Version 2.8.1