
Power Pack, 120-277V, 50/60Hz, 24VDC, 225mA, w/Auto-On/Man
BZ-150
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The BZ-150 Universal Voltage Power Pack can provide 24 VDC operating voltage to Wattstopper’s lowvoltage occupancy sensors. In addition, the BZ-150 enables manual-on, hold-on, hold-off and load shed applications when used with lighting control panels or building management systems. This device is constructed with environmentally friendly materials and is RoHS-compliant.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Self-contained power supply relay system
- Efficient switching power supply providing optimized current output based on number of sensors
- LED indicates status of relay or if there is a low-voltage overcurrent
- Hold-on and hold-off inputs integrate with BMS, lighting control panels & other building systems
- Integrates with low-voltage momentary switch to control any 24VDC occupancy sensor
- The product meets the materials restrictions of RoHS
- Provides auto-on or manual-on field-selectable operating mode
Specifications
General Info
Product Line | Wattstopper | ||
UPC Number | 754182922918 | ||
Country Of Origin | China | ||
Application Sector | Commercial | ||
Warranty Type | 5-Year |
Dimensions
Product Width US | 3.0 in | ||
Product Weight US | 0.35 lb | ||
Product Volume US | 28.12 cu in | ||
Product Depth US | 3.75 in | ||
Product Height US | 2.5 in |
Technical Information
Amperage | 20 A | ||
Connection Type | Wired |
Resources
White Papers & Tech Bulletins
Cutsheet
Installation Instructions
CAD Drawings
57-007-8 - Typical Wiring for BZ-150 Power Pack
png
57-007-9 - Typical Wiring for BZ-150 Power Pack Bi-Level Control with MANUAL ON
png
60-961 - Power Pack Hold On with Relay
dwg
60-961 - Power Pack Hold On with Relay
pdf
60-961 - Power Pack Hold On with Relay
png
60-961 - Power Pack Hold On with Relay
dxf
Typical Wiring for BZ-150 Power Pack Bi-Level Control with MANUAL ON
dwg
View More
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Would this be an alternative or replacement for ILC TR277?
Hi Cory,
Yes, It would be a good alternative. Please refer to the installation guide for proper wiring instructions.
Date published: 2023-06-29
The BZ -150 and DT-300 were recently specified for plug / receptacle control on a project we are bidding. Can you confirm if this is rated for receptacle loads ? ( 20 amp max) .
Hi Al,
The BZ-150 power pack is rated for up to a 20-amp load rating.
Date published: 2023-03-14
Can you Dim LED fixtures using 0-10 volts with a BZ-150. BAS will be dimming fixtures at off hours at a certain percentage.
Hello,
Please feel free to give Technical Support a call to further discuss your configuration.
legrand Contact information:
Phone #: 844-957-3783 - Option 1, followed by option 2 for Technical Support.
Monday - Friday | 8:00am - 6:00pm Eastern Standard Time (excluding holidays)
Best Regards,
Technical Support
Date published: 2022-10-18
How many ceiling mounted occupancy sensors DT-300 will one power pack BZ-150 operate
You can have up to 4 DT300 ceiling sensors, per power pack.
Date published: 2022-07-12
Can 2 power packs control 1 sensor?
Yes, attached below is a wiring diagram showing one sensor and up to 3 power packs being used.
Date published: 2023-08-17
Can this be installed in a junction box and still be under warrantee?
Yes you can install a BZ-150 in a junction box
Date published: 2022-04-13
From BZ-150 datasheet: on/off control by 12 or 24Vdc What is the max. input current using 24Vdc control. Is that value the same for BZ-50 and BZ-100? Thanks!
The BZ-50 and BZ-150 is rated for 120/277VAC, 230/240V (single phase), 50/60Hz voltage
input.
Date published: 2023-03-16
Bazaarvoice SAP Hybris Integration Version 2.8.1