text.skipToContent text.skipToNavigation

Front of PIR Wall Switch Occupancy Sensor, 120/277V, White

Front of PIR Wall Switch Occupancy Sensor, 2 Relays, 120/277V, Grey with plate cover

Front and side of PIR Wall Switch Occupancy Sensor, 2 Relays, 120/277V, White

Front of PIR Wall Switch Occupancy Sensor, 2 Relays, 120/277V, White with plate cover

Front of PIR Wall Switch Occupancy Sensor, 2 Relays, 120/277V, Black with plate cover

Front of PIR Wall Switch Occupancy Sensor, 2 Relays, 120/277V, Ivory with plate cover

Front of PIR Wall Switch Occupancy Sensor, 2 Relays, 120/277V, Light Almond with plate cover

Discontinued - PIR Wall Switch Occupancy Sensor, 2 Relays, 120/277V, Black

PW-200-B Wattstopper

Replaced by PW-302-B

The PW-200 passive infrared (PIR) wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads or circuits, and a variety of features.

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

High sensitivity and dense coverage for exceptional performance
Two relays for control of two separate lighting loads or circuits
Color-matched lens and low profile for appealing design
Selectable operation, walk-through, test and presentation modes for increased energy savings and convenience
Defaults to Auto-ON to 50% operation for maximum energy savings
Defaults to Auto-ON to 50% operation for maximum energy savings
Sensor coverage tested to NEMA Guide Publication WD 7-2000
Detection Signature Processing eliminates false triggers and provides immunity to RFI and EMI
Vandal resistant lens combines precise coverage with durability
Selectable walk-through mode turns lights off three minutes after the room is initially occupied if no motion is detected after the first 30 seconds
Choice of Manual-ON or Auto-ON operation, selectable for each relay
In automatic mode, sensor returns automatically to Auto-ON after lights are turned off manually; ideal for presentations
Service mode allows sensor to operate as a service switch in the unlikely event of a failure

Specifications

General Info

Color	Black
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	China
Replaced by Part Number	PW-302-B
Features	IR (Infrared), Motion Sensor
Switch Type	Motion Sensor
Warranty Type	5-Year
UPC Number	754182919314

Dimensions

Product Depth US	1.8 in
Product Height US	4.5 in
Product Volume US	35.1 cu in
Product Width US	1.8 in
Product Weight US	0.3 lb

Additional Information

Product Environmental Profile

Yes

Technical Information

Amperage	4.3 A
Requires Neutral Wire	No
Connection Type	Wired
Indicator	LED Light
Number of Buttons	2
Response Frequency	50/60 Hz
Sensor Type	Occupancy
Sensor Technology	Passive Infrared (PIR)
Wattage	1200 W

Resources

Recently Viewed

Gator Grip Connector, Yellow

D0653 | Pass and Seymour

Gator Grip Connector

View Details

HDJ 2 port plastic surface mount box - fog white - with label field

404HDJ2 | Ortronics

HDJ Surface Mount Outlet Boxes accept rear-loading high density jacks & (HDJ) modules and provide snap-on covers and snap-in label fields. Meet UL2043 and are suitable for installation in air handling spaces (ie plenum spaces) Boxes are supplied with screws and double-sided adhesive tape for mounting onto almost any surface.

View Details