COVID-19 Update
A message from John Selldorff on the COVID-19 virus and what LNCA is doing in response. Normal ship times remain in effect for available products.
Menu
Search radiant
explore our collections

Menu
120V CFL/LED Dimmer, Graphite
Sorry! That combination does not exist.
WHERE TO BUY
ADD TO CART
Specifications
General Info
Color: Graphite
Type: CFL/LED
Number Of Poles: Single Pole/3-Way
Style: Rocker
Listing Agencies/Third Party Certifications
RoHS: Yes
CSA Listing Info: C22.2 No. 184
CSA Standard: Yes
cULus: Yes
UL Standard: Yes
Construction Information
Component 4: 78500717374
Dimensions
Depth (US): 1.25"
Height (US): 4.25"
Width (US): 1.75"
Technical Information
Volts: 120
Volts (AC): 120 VAC, 60Hz
Watts: 450/701
Buy American Act Compliance
Country Of Origin: CHINA
ADDITIONAL INFORMATION
This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
LEED Contribution: Yes
RoHS_Compliant
LEED_Contribution
Ratings
Rated 3 out of 5 by from Misleading Incompatible with low voltage LED bulbs. When converted to LEDs, no light fixture in my home pulls enough current to work with this dimmer. Adjusting the trim simply keeps the bulbs from dimming to the point of flicker (defeating the point of having a dimmer if the lights cannot be dimmed). I only discovered some fine print, ~"not for 0-10v" after extensive research. This information is nowhere on the box or packaging. Frustratingly, I really like the fit, feel, and finish of this switch. I am considering returning to incandescent bulbs in the fixture just so I can keep this switch.
Date published: 2019-02-28
Rated 1 out of 5 by from Awful dimming This dimmer flickers dimmable 2700k LED recessed can lights retrofit modules , thats just ridiculous , any dimmer would dim a 40 watt or 4 10 watt led load minimum, but this awful product can’t even do that and it rated for LED but not 0 to 10 volt driver ?? All LED products have that rating now , poor design and engineering I will never use another Legrand product for any reason, I’ve been an electrician for 35 years
Date published: 2020-01-23
Rated 1 out of 5 by from Dimmer We've used them through out our house but this one was defective and I had to return it because the hot wire screw was stripped. I will repurchase because I think this was a one time thing and they are a beautiful update to our home
Date published: 2019-08-03
Rated 5 out of 5 by from Great to be able to change colors It is a great dimmer able to change colors after you buy it
Date published: 2019-04-01
Rated 5 out of 5 by from No screws, clean lines We replaced our bathroom switch with this one. It's elegant and classy, and adds a touch of class to our newly remodeled bathroom. Lines are clean and there's no screws showing. The changeover from old to new was really easy.
Date published: 2019-03-11
  • y_2020, m_9, d_19, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_47
  • loc_en_US, sid_RHCL453PGCCV4, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getReviews, 10ms
  • REVIEWS, PRODUCT

Hi: do you have a product that would work with Satco S9895 LED bulbs? The fixture we have uses 7 of them, they're 6.5 watt, 120 volt bulbs. Thanks!

Asked by: sfleming84
The RHCL453P or RH703PTU dimmers will work will these LED bulbs.
Answered by: Legrand Technical Support
Date published: 2020-07-24

Is the Legrand RHCL453PTC a TRIAC dimmer switch?

Asked by: Ramon
Yes, the RHCL453PTC is a Triac base dimmer.
Answered by: Legrand Technical Support
Date published: 2020-05-15

I have this switch installed in my bedroom. Can I disable the LED light? It shines too brightly and I tend to stare at it on sleepless nights., which is very annoying.

Asked by: Mupsie1
This dimmer does not have the ability to disable the locator LED.
Answered by: Legrand Technical Support
Date published: 2020-05-13

Am I able to use these switches in scenario where there are two 3 way switches with a 4 way in between? Basically I have 3 switches to control a light circuit and would like to be able to use the same radiant collection switches throughout our home. Thank

Asked by: Maxx
You can only use one of the RHCL453PTC dimmers in a 3way or 4way application so it could replace one of your 3way switches.
Answered by: Legrand Technical Support
Date published: 2020-05-31

Looking for 120V LED double dimmer switch nickel

Asked by: Mike
A dual LED dimmer is not available at this time in any color.
Answered by: Legrand Technical Support
Date published: 2019-12-23

Will this work with LY4RCS / 30K? LED mfg. specs indicate dimmable - TRIAC Dimmers 5% - 100%?

Asked by: Pete
Not helpful. Incorrect info provided by Legrande Technical Support, as when connected, only dims to +\- 30. I provided make and model. Now I’m left with decision to go with Lutron or pay $50+ per dimmer. Welcome Legrade support here.
Answered by: Pete
Date published: 2019-10-12

Will this dimmer switch work with Lithonia Lighting Ultra-Thin Wafer 4 in. White Integrated LED Dimmable Recessed Kit? If not which dimmer, same design would work?

Asked by: Nico
The RH703PTUTC would be a better option for dimming recessed LED lights. https://www.legrand.us/search.aspx?q=rh703ptutc
Answered by: Legrand Technical Support
Date published: 2020-04-12

Is it possible to make the rocker switch control a light, and the dimmer switch control a separate ceiling fan? The light would not be part of the ceiling fan.

Asked by: bigdavid961
The switch you mentioned can only control one load at a time and is rated only for cfl or led bulbs. You would need our switch for the led bulb and a fan control device for the fan.
Answered by: Legrand Techincal Support
Date published: 2020-03-13
  • y_2020, m_9, d_18, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_RHCL453PGCCV4, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, net_sdk, 3.2.0.0
  • CLOUD, getReviews, 50ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The getReviews method is only supported when schema.org is configured for structured markup. Please submit a support ticket at spark.bazaarvoice.com to have your Bazaarvoice configuration updated to use schema.org for structured markup.;

Chat Is Currently Offline

Leave a message here to request a call back from our customer support team.



Submit