5

Browse 253 results for "plugtail"

Choose from one of Legrand's brands.

Value that Specifically Names the Type/the Application Value of the Closest Piece of Equipment/the Designated Type of Construction/the Generic Type/the Manufacturer Type Designation/the Specific Function/the Type of Application

The color of the product itself

Trust in quality and compliance. Use this filter to find products that have undergone thorough testing and evaluation to ensure they meet the quality and safety standards for a wide range of certifications.

The industrial standard(s) to which a device is manufactured, operated, or tested.

Denotes whether a product comes prewired for quicker installation.

The Device that Receives a Signal or Stimulus (As Heat or Pressure or Light or Motion Etc.) and Responds to it in a Distinctive Manner

Maximum electrical current the conductor or device can carry before sustaining immediate or progressive deterioration

Where a Device is or is to be Installed

National Electrical Manufacturers Association Ratings are Standards that are Useful in Defining the Types of Environments in Which an Electrical Enclosure can be Used

The Voltage, Current, and Power Capacities of Relay Contacts Under Specified Environmental Conditions

The Factional Part of the Period of a Sinusoidal Wave, Usually Expressed in Electrical Degrees and Referenced to the origin

Measure of the Electrical Strength of a Material as an Insulator, the Maximum Electrical Potential Gradient that a Material can withstand without Rupture, the Higher the Dielectric Strength of a Material the Better its Quality as an Insulator

Tamper resistance is resistance to tampering (intentional malfunction or sabotage) by either the normal users of a product, package, or system or others with physical access to it.

The amount of switches on the plate.

Between Discrete Points Allows the Flow of Electrons (Electric Current)

Is this product listed as Weather Resistant ?

The Number of Occurrences within a Given Time Period, the Rate at Which Alternating Current Makes a Complete Cycle of Reversals

Enviromental Conditions rating on the product. Indoor Only, Outdoor, Both

Amount of Time a Timer can Last

The Difference of Electrical Potential Between Two Points of an Electrical or Electronic Circuit Entering a System

The Number of Pliable Metallic Strand or Rod Made in Many Lengths and Diameters and are Electrically Insulated, Used Conduct Electricity

Product is available to buy on Legrand.us

The Number of Electrical Wall Outlets Designed for Use with a Plug

Denotes the type(s) of load that can be applied to a dimmer, which determines its compatible light sources.

The Minimum Input Which the Device can Sense and Produce the Output

Number of USB ports

The way the item is mounted for display. The method by which a sign or label is affixed to a surface for display. Many signs will not have any defined mounting type and so will have no value captured for this attribute.

Frequency response is the quantitative measure of the output spectrum of a system or device in response to a stimulus, and is used to characterize the dynamics of the system. It is a measure of magnitude and phase of the output as a function of frequency, in comparison to the input.

It is the Normal Size of the Conductors for Building Wire

Alpha-Numeric Code Applied to Connectors to Guarantee Consistency and Interchageability Between Manufacturers

The maximum load that a device is designed to withstand without breakage or loss of performance.

Style or Type of Connection Used

Used to identify and differentiate offerings within a particular product line. Product families are typically treated as adjectives. It is not recommended to use the product line (ex: Wiremold®) and product family names (Evolution™) together. This will introduce a level of unnecessary confusion for the audience.

The Dimensional Specification of the Object Which is Set as a Target for the Sensor

The total Possible Sensing Capability of the Sensor, Beginning After the Deadband, and Extending Out as Far as the Sensor is Able to Reach Effectively

Number of electrical switches

The Rate at Which Energy is Drawn from a Source that Produces a Flow of Electricity in a Circuit

The Temperature at Which the Unit is Safely Operated or Kept without Damaging or Changing the performance Characteristics of the Unit

The overall width of the product.

This product contributes to earning credits in the LEED rating system.

Describes the method used to connect wires to the device, such as screw terminals, push-in connectors, or lead wires.

Indicates the lowest possible temperature a device can be safely used without the risk of failure or damage.

Describes the mode of operation for devices that can be turned on, indicating whether they stay on continuously or operate on a timer or sensor.

Indicates whether a device has been tested to withstand and/or perform under certain seismic conditions.

The effective range of trip for an operating mechanism in the event of thermal overload, short circuit current, or ground fault.

Describes the total area, measured in square footage, within which a sensor can detect presence or movement.

Describes the type/specification of signaling a device uses to indicate abnormal and/or operating conditions.

Describes the maximum electrical power a USB receptacle can safely output.

The overall depth of a product.

Indicates if the device comes with a cover plate for aesthetic integration with the wall.

Describes the shape of the area that a sensor is able to detect presence or movement within, measured in degrees.

Refers to the power capacity of a device under normal load conditions, measured in horsepower (HP).

Indicates whether a device requires a neutral wire to function properly.

Describes the range of humidity at which a device can be utilized safely without the risk of failure or damage.

Specifies where on the device the electrical connections are made, which can affect installation.

A collection of related products that share a common design, technology, or purpose. Products within the series either maintain a cohesive brand / style identity or work together to serve a particular solution.

The overall height of a product.

Refers to the style or operation method used by a switch to control lighting or other electrical devices.

Describes the method of switch operation, indicating whether it controls one circuit (single-throw) or switches between two circuits (double-throw).

Indicates the maximum temperature rise over ambient a device is expected to function at after a certain amount of cycles and current is applied.

The frequency of alternating current (AC) in an electrical power system, measured in Hz. Also commonly referred to as Utility Frequency, Power Line Frequency, or Mains Frequency.

Describes the components used by a device to indicate specific information like status, performance, or options.

Indicates the number of electrical phases a device utilizes.

The technology used by a device to sense a change in signal or stimulus.

Single pole switches have two terminals and control one light fixture from one location. 3-Way switches have three terminals and can control one fixture from two locations. 4-Way switches have four terminals can control one fixture from three locations. Multi-location refers to switches connected to a smart lighting system.

Indicates the highest possible temperature a device can be safely used without the risk of failure or damage.

Describes the type and size of wire that the receptacle's terminals can securely hold (typically provided as a range in gauge size).

Describes the relative range of climatic standards a device can safely operate within.

The overall length of a product.

Describes the unique qualities or characteristics of an electrical outlet that make it better suited to different uses. The listed qualities may give the outlet improved safety performance, increased efficiency, or additional functionality.

Denotes the classification used to assess the suitability or performance of a device based on the specific environmental location in which it operates.

Describes the maximum electrical current the conductor or device can carry through its USB ports before sustaining immediate or progressive deterioration.

Refers to the expected environment(s) or intended usage(s) for a product (e.g. Residential, Commercial, Industrial, etc.).

The product warranty that accompanies the specific product.

Unique characteristics and functionality that set the product apart from others in its field.

Describes the specific surface treatment applied to the outer product for either aesthetics and/or durability.

Indicates the primary material(s) used to construct a product.

Filter your results to only in-stock products sold directly on legrand.us.