text.skipToContent text.skipToNavigation

adorne collection devices adorne collection devices

adorne® 15A 1-Gang Pop-Out Outlet, Graphite

Name: adorne® 15A 1-Gang Pop-Out Outlet, Graphite
Brand: adorne Collection
SKU: ARPTR151GG2
Price: 78.8
Availability: InStock

ARPTR151GG2 adorne Collection

$78.80 USD

The cleverest way to add power and style, the Pop-Out Outlet extends to offer 3-plug access, then uniquely disappears back into the wall with a simple push when not in use. Made exclusively for use with screwless Wall Plates from the adorne Registered Collection, sold separately.

Color Graphite

Free shipping on orders over $49 & free returns

Quantity

In Stock

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

For complete installation, device must be paired with an adorne® screwless Wall Plate (not included). Available in a range of contemporary colors and stunning finishes.
Perfect anywhere you'd like to hide outlets when not in use, for added style and safety.
Provides additional power with 3-plug access when extended from wall.
Disappears back into the wall with a simple push when not needed.
Installs easily in as little as 15 minutes.
Comes with a special frame for mounting and requires a deep electrical outlet (22.5 cubic inches). No new wires required for typical installation.
Protects children with a patented tamper-resistant shutter system that prevents improper insertion of foreign objects, complete with "invisi-shutters" for an invisible effect.
More color options available to fit any style, including finishes to match current hardware and lighting trends.

Specifications

General Info

Color	Graphite
Application Sector	Multi-Dwelling Unit, Residential
Product Line	Pass & Seymour
Country Of Origin	China
Features	Pop-Out
Wall Plate Included	No
Number of Receptacles	3
Outlet Type	Pop-Out, Tamper-Resistant
Warranty Type	Limited Lifetime Warranty
UPC Number	785007234527

Dimensions

Product Depth US	2.6 in
Product Height US	4.88 in
Product Width US	2.99 in

Technical Information

Amperage	15 A
Connection Location	Back Only
Wire Connection Type	Internal Pressure Plates
Environmental Conditions	95% (relative humidity, non-condensing)
Indoor/Outdoor	Indoor
Is Tamper-Resistant	Yes
Mounting Type	Box
NEMA Configuration Code	5-15R
Number of Gangs	1
Number of Poles	Double Pole
Number of Wires	3
Voltage	125.0 V
Wire Size	14 - 12 AWG

Resources

Should have been more specific. The receptacle I need is a split-able 15 amp, installed along the backsplash of a kitchen.

Asked by: John

Thank you for your inquiry. Please contact Pass & Seymour Technical Support for further assistance with your request. Pass & Seymour Technical Support Phone #: 800-223-4185 Monday - Friday | 8:00 am - 6:00 pm Eastern Standard Time (excluding holidays)

Answered by: Pass & Seymour Technical Support

Date published: 2026-04-13

Do you have a solution for split 15amp kitchen countertop receptacles? I need 2 of them!

Asked by: John

Thank you for your inquiry. We offer the following devices for our Kitchen Countertop applications. Part #: CP498TR15W - Kitchen Countertop Outlet, 15A, Matte White Please feel free to give us a call if you have any questions. Pass & Seymour Technical Support Phone #: 800-223-4185 Monday - Friday | 8:00 am - 6:00 pm Eastern Standard Time (excluding holidays)

Answered by: Pass & Seymour Technical Support

Date published: 2026-04-10

Are your outlets GFI

Asked by: Ben

These specific outlets are not GFI. If you are interested in using these, a GFI circuit breaker can be fitted in the panel to protect, however, not convenient to reset 

Answered by: Greg Christy

Date published: 2026-03-27

Its been perfect for almost a year, suddently it started to pop out on its own, I read a similar issue and it was suggested to tuck wires to leave more room behind its connection, but I checked it and everything looks right. It seems faulty outlet 

Asked by: Walter

Wish that I could help, but ours -- installed for about the same period of time -- is working fine. I hasten to add that we don’t use it a lot. (It's installed on a square pillar that supports a ceiling beam in our now open-plan Kitchen-Mudroom, where we removed a wall in renovations. We didn’t really “need” it but the city electrical code requires an outlet every “X” feet, so that was the best solution to being able to pass inspection.) Frankly, it sounds more like a "mechanical" problem than an electrical problem, perhaps with the "release and catch" mechanism that responds to the push?

Answered by: Elle

Date published: 2024-10-15

Have four of these pop outs, but I lost one of the steel frames. The frame for all other Adorne single-gang devices wont work...seems the one for the pop-out is specific only to itself. Is there a way to get a replacement frame specific to the pop out?

Asked by: Joe

I had the same problem. I took a standard 1- gang frame and just modified it with a Dremel tool and it worked fine.

Answered by: UFGator

Date published: 2024-10-30

Peut-on la poser Mural mais à l'horizontale dans le cas où il ne reste pas beaucoup d'espace au-dessus du mécanisme intérieur d'un armoire de bas sur le côté d'un îlot ?

Asked by: emmanuelle gauthier

Hello, Yes, this pop-out could be installed horizontally on a wall but the junction box would also need to be installed horizontally.

Answered by: Wiremold Tech Support

Date published: 2024-08-07

Is there a GFCI version I can use in the bathroom?

Asked by: Joe

Hello, The adorne Pop-Out Outlet does not come in a GFCI configuration. We would recommend using adorne AGFTR2152W4 GFCI for bathroom applications. Best Regards, Technical Support

Answered by: Pass & Seymour Technical Support

Date published: 2025-10-31

Can I paint these?

Asked by: Christina

I don't see why not. As long as you were careful and only painted the face.

Answered by: UFGator

Date published: 2024-10-08

adorne® 15A 1-Gang Pop-Out Outlet, Magnesium Questions - page 2

adorne® 15A 1-Gang Pop-Out Outlet, Graphite

Features

Specifications

Resources

Installation Instructions

CAD Drawings

Brochure

Supporting Document

Catalog

Customer CAD PDF

Cutsheet

Reviews

Questions & Answers

Should have been more specific. The receptacle I need is a split-able 15 amp, installed along the backsplash of a kitchen.

Do you have a solution for split 15amp kitchen countertop receptacles? I need 2 of them!

Are your outlets GFI

Its been perfect for almost a year, suddently it started to pop out on its own, I read a similar issue and it was suggested to tuck wires to leave more room behind its connection, but I checked it and everything looks right. It seems faulty outlet

Have four of these pop outs, but I lost one of the steel frames. The frame for all other Adorne single-gang devices wont work...seems the one for the pop-out is specific only to itself. Is there a way to get a replacement frame specific to the pop out?

Peut-on la poser Mural mais à l'horizontale dans le cas où il ne reste pas beaucoup d'espace au-dessus du mécanisme intérieur d'un armoire de bas sur le côté d'un îlot ?

Is there a GFCI version I can use in the bathroom?

Can I paint these?

You may also like...

Recently Viewed

adorne® 15A 1-Gang Pop-Out Outlet, Graphite

Features

Specifications

Resources

Installation Instructions

CAD Drawings

Brochure

Supporting Document

Catalog

Customer CAD PDF

Cutsheet

Related Products

Reviews

Questions & Answers

Should have been more specific. The receptacle I need is a split-able 15 amp, installed along the backsplash of a kitchen.

Do you have a solution for split 15amp kitchen countertop receptacles? I need 2 of them!

Are your outlets GFI

Its been perfect for almost a year, suddently it started to pop out on its own, I read a similar issue and it was suggested to tuck wires to leave more room behind its connection, but I checked it and everything looks right. It seems faulty outlet&nbsp;

Have four of these pop outs, but I lost one of the steel frames. The frame for all other Adorne single-gang devices wont work...seems the one for the pop-out is specific only to itself. Is there a way to get a replacement frame specific to the pop out?

Peut-on la poser Mural mais &agrave; l'horizontale dans le cas o&ugrave; il ne reste pas beaucoup d'espace au-dessus du m&eacute;canisme int&eacute;rieur d'un armoire de bas sur le c&ocirc;t&eacute; d'un &icirc;lot ?

Is there a GFCI version I can use in the bathroom?

Can I paint these?

You may also like...

Recently Viewed

Its been perfect for almost a year, suddently it started to pop out on its own, I read a similar issue and it was suggested to tuck wires to leave more room behind its connection, but I checked it and everything looks right. It seems faulty outlet

Peut-on la poser Mural mais à l'horizontale dans le cas où il ne reste pas beaucoup d'espace au-dessus du mécanisme intérieur d'un armoire de bas sur le côté d'un îlot ?