adorne® Motion Sensor Switch Manual On/Auto Off, Graphite
ASVS12G4
adorne Collection
adorne Motion Sensor Switch Manual On/Auto Off is rated
out of
5 by
3.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$56.32 USD
Perfect for anywhere you might want to manually turning lights on, but know they'll turn off automatically, such as children's bedrooms.
The adorne Manual On/Auto Off Motion Sensor Switch provides combination control by allowing you to manually turn lights on when entering a room, and automatically turn the lights off for you when you leave, thanks to motion-sensing technology. Use this device on its own to control a light or fixture from a single location one location, or combine with additional switches for controlling a single light source from multiple locations in 3 or 4-way applications. (four-way operation).
Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
Quantity
In Stock
Added to Your Shopping Cart
- Send
- Save as PDF
-
FavoriteAdded to Favorites Go to favoritesRemove from favorites?
Features
- Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a stunning, screwless adorne® Wall Plate, not included. Available in a range of contemporary colors and finishes. Coordinate with other designer switches & outlets.
Specifications
General Info
| Product Line | Pass & Seymour | ||
| Color | Graphite | ||
| UPC Number | 785007234800 | ||
| Country Of Origin | China | ||
| Number of Switches | 1 | ||
| Warranty Type | Limited Lifetime Warranty |
Technical Information
| Number of Gangs | 1 | ||
| Number of Poles | Single Pole, 3-Way | ||
| Wattage | 600 W | ||
| Mounting Type | Box | ||
| Voltage | 120 V | ||
| Connection Type | Internal Pressure Plates |
Resources
Cutsheet
Supporting Document
CAD Drawings
Guide Form Specifications
Customer CAD PDF
Installation Instructions
Reviews
Rated 4 out of
5
by
Sellers from
Works - requires the same model for multi-way
I found these worked well. I didn't realize at first that the second multi-switch must the same model, not another model or a simple 3/4 way switch. I also found that the switch didn't work well w/o adjusting the time settings. The switch would either conflict or run into a race condition where both switched switched "off" at the same time and it sent both switches into a non-functioning mode - button didn't work at all. Resetting the switch (manually) or via a power-off, and power-on (breaker) appeared to reset the switches, and both would work once, and then go into a hung mode. Adjusting the timing of the switches via the documentation so that they were not using the default times from the factory, caused both switches to work great. I have not tried to connect the white wire to make the light work yet.
Date published: 2020-12-15
Rated 1 out of
5
by
Bill from
This switch does not operate correctly.
This Adorne sensor switch is poorly engineered. This sensor switches activates randomly throughout the day and night. I have replaced the “automatic” sensor switch twice, and they all randomly switch on and off. How can a reputatable manufacturer market a switch that does not even operate correctly?
Date published: 2018-12-09
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
The regular 4-way switch from Adorne has 02 terminals ("IN") and 02 terminals ("OUT"), while the ASVS12W4 has four terminals ("03-WAY", "HOT", "WHITE", "1-POLE"). How do I use one of the ASVS12W4 to work in a 4-Way installation?
You need one of the ASVS12W4 wired as a Master, HOT, LOAD connected to 1pole, traveler wire to 3way and optional Neutral to White terminal.
Both auxiliary's are wired the same: one traveler to the 3way terminal and power to HOT. 1pole is not connected and Neutral is optional
Date published: 2021-04-28
In a 4-way installation, how do I make a ASVS12W4 work as a 4-way switch considering that the regular 4-way switch ASPD2042G4 has 02 terminals "IN" and 02 terminals "OUT" while the ASVS12W4 has 1 terminal "3-WAY", 1 "WHITE", 1 "HOT" and 1 "1-POLE"?
You need one of the ASVS12W4 wired as a Master, HOT, LOAD connected to 1pole, traveler wire to 3way and optional Neutral to White terminal.
Both auxiliary's are wired the same: one traveler to the 3way terminal and power to HOT. 1pole is not connected and Neutral is optional
Date published: 2021-04-28
Can the sensitivity of the motion sensor be adjusted?
This sensor does not have a sensitivity adjustment available.
Date published: 2020-10-15
Can it be turned off manually?
Yes, if you do not want to wait for the sensor to turn the load off, you can turn it of manually.
Date published: 2022-06-05
For a three way operation, can I have a non motion switch on the other gang or do I need to have both motion switches on each end?
Hello,
Both locations will have to be the ASVS12W4 Vacancy sensors in order for them to work in a 3 way. If You want a motion sensor the model is ASOS32W4, You will need two of the same device in order for them to work in a 3 way.
Hope this helps,
Have a great day.
Date published: 2021-03-25
can this be paired with a half switch in the one-gang plus wall plate? I tried a half switch with a softap and the back of the softap was too large.
The sensor back body is too large for it to fit in the 1 gang+ wallplate with the 1/2 size Paddle switch. You can use the Paddle or Whisper mechanical switches because their body is standard size.
Date published: 2019-02-19
Can the length of time the light is on be adjusted?
Hello,
The time can be adjusted on the ASVS12W4. 5 minute (Min)-30 minute (max).
Hope this helps,
Have a great day.
Date published: 2019-02-11
I need 2 switches in 1 place, believe it's called 2 gang. the motion sensor switch manual for bathroom light, and timer switch for heating lamp can those be placed next to one another, with one wall plate -of course 2 holes?
Hello,
Yes, the motion sensor and timer switch can be installed next to each other in a 2 gang configuration.
Hope this helps,
Have a great day.
Date published: 2021-03-25
You may also like...
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
AAAL1G4 | adorne Collection
The Accent Nightlight is a stunning addition to any adorne product. It provides a wash of light below the wall plate, acting as a nightlight or as an accent light.
$22.68
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
ADSM703HM2 | adorne Collection
Motion-sensing technology with optional Manual-ON/Auto-OFF. Perfect for use in garages and pantries.
$79.52
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
ASOS32M4 | adorne Collection
The adorne� Motion Sensor Switch, Auto-ON/Auto-OFF includes motion-sensing technology, automatically turning lights on when you enter a room and off when you leave. Perfect for garages and pantries.
$66.61
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
AWP1G2GR6 | adorne Collection
Dark, sleek and a bit dramatic, this wall plate brings a sophisticated edge to any space.
$11.89