|Product Line||Pass & Seymour|
|Country Of Origin||China|
Listing Agencies / 3rd Party Agencies
|Number of Poles||Single Pole|
Guide Form Specifications
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I have a fan/light fixture on a 3-way switch. It has 2 red, 2 black &1 green. I think the single black is hot and know the green is gnd. No wires are labelled. How do I tell how the other black and two reds get wired to the 2 red & 1 yellow on the switch?
We would recommend that you either use a volt meter to determine your wiring, consult with an electrician, or contact Technical Support: Pass & Seymour products 1.844.957-3783 Mon - Fri: 8am - 6pm EST (excluding holidays) Email Us - email@example.com
Date published: 2022-04-15
Will this control two separate sets of dimmable LED lights (no fan on circuit)?
No, this device is not designed to control two lighting circuits. We do not have a dual LED dimmer available.
Date published: 2021-06-03
What are the practical differences between the Legrand dual dimmer switch model # LSDC163PLAV and dimmer switch model # LSCLDC163PLACCV4? In the latter model number, what do the extra characters “CL” and “CCV4” represent?
The dimmer on the LSDC163PLAV is for Incandescent lights only and the LSCLDC163PLACCV4 is for Incandescent, CFL, and LED lights. The V or CCV4 is for the packaging(V is for our clear vision pack).
Date published: 2021-01-18
Is the light dimmer on this switch rated for led lights?
No, it is rated for Incandescent lights only. The LSCLDC163PBK is rated for Incandescent, and CFL/LED bulbs as well.
Date published: 2020-08-05
Hi, can I use this switches for an extractor and led lamps instead of fan/led lamps? Thank you.
This dimmer side of the dual controller is not rated for LED lamps/bulbs. It is for incandescent only and the remaining side is for fan control.
Date published: 2020-06-15
LSDC163PWV. What led light blubs will and are compatible with my fan that will work from this dimmer please
The dimmer should work with most CFL/LED retro fit bulbs without issues and attached is our tested bulb list.
Date published: 2020-05-14
How do I wire this?! I am looking to install this to power a fan with a light. I have 4 wires: black, red, ground, white. The yellow have me totally lost.
In my wall/fan I have Black -hot/motor Red - light White - neutral Green - ground So then... Outlet. Fan. Black & red. - Black/motor Yellow. - Red/light Green. - Green White to white.
Date published: 2020-06-22
Your wire diagram is confusing. Am I using 3 total switches. And how is the fan separated in this diagram . I want to 3-way the light only and have the fan on a single pole with speed control. Also do I need 3 separate powers to do this
This device needs to be on the LINE(hot) side of your 3way with power going to the Black wire and it will provide power to both fan and light control. The two Yellow wires would connect to your traveler wires for your 3way light and one Red wire would be connected to your fan(one Red is capped off). Pass & Seymour products 1.800.223-4185 opt 1 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - firstname.lastname@example.org
Date published: 2020-03-03