text.skipToContent text.skipToNavigation

Discontinued | Non-Grounding Three-Way Combination Switch & Pilot Light, Brown | Sub 695G

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 219ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Three-way, Single Pilot Light, Combination Switch, 15 amps, 120/125 volts, Light Almond.
Color Brown
WHERE TO BUY

Features

  • Easily accessible break-off separate or common feed.
  • Long-life red neon lamp in pilot light rated 1/25 Watt, 125V.
  • Side wire #12 and #14 AWG.
  • Two devices fit into the space of one.
  • Grounding combination devices meet NEC Requirements.
  • Tamper-resistant version features dual mechanical shutter system to help prevent insertion of foreign objects.
  • For covering patents, see www.legrand.us/patents.

Specifications

General Info
Color Brown
UPC Number 785007695007
Country Of Origin Mexico
Product Line Pass & Seymour
Application Sector Residential/Commercial
Standard UL20
Listing Agencies / 3rd Party Agencies
cULus Listed  Yes
cULus ListingNumber  140597
Technical Information
Number of Poles 3-Way
Voltage 120 V
Actuator Toggle
Contact Configuration N-O
Connection Side wire, non-grounding
Contact Rating 15 Amp, 120/125 VAC
Action 3W & Pilot Light
Environmental Conditions Flammability: UL94 V2
Operating Cycles 30000

Resources

Reviews

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 75ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Questions & Answers

followup - thx 4 the drawings, but notes on the left one (Break Tab) are too small to read!. Plz confirm: "To work: on line side, break off tab and p----- line from light to "line-in" (?) on 695 or ---." Can you reply by email - not enuf space here

Asked by: Claire
Hello, I would be happy to help with this, please see attached image on how this would be wired depending on how you intent to use the light. If you have any additional question please contact us at 1-844-957-3783. Thank you,
Answered by: Jeffrey M.
Date published: 2021-08-06

Replacing a 1970's switch marked "Slater". Connected new exactly as the old, but when I turn power back on, the lights stay on (no 'off'). Clockwise from LR: 2 Blk on 1 Blk screw, 2 orange on brass screws, 2 W on silver , 1 Yellow on silver.

Asked by: Claire
If the switch you are replacing has a Pilot light, wiring should be the same. If not, see attached guides depending on which side of the circuit you are installing the 695 switch.
Answered by: Legrand Technical Support
Date published: 2021-08-06

Where can I find a wiring diagram for this switch?

Asked by: Kyle
The wiring diagram for the 695WG is attached. Pass & Seymour products 1.800.223-4185 opt 1 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2021-08-06

The little red pilot light does not shut off when we turn light off . We want it to shut off so we can tell if celler light is left on. It is a 3 way it shuts light off in both locations just not little red light.

Asked by: Sara
The wiring for the 695WG depends on which side of the circuit it is installed on(LINE or LOAD side). I would suggest contacting Technical Support to discuss proper installation. Pass & Seymour products 1.800.223-4162 opt 3 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2021-08-06

Does this 695W 3way switch light when light in attic  is on or off?

Asked by: Doctor
Good Morning, It can be wired up either way. Hope this helps!
Answered by: Tech Support
Date published: 2021-08-06
  • y_2021, m_10, d_21, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_695, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 141ms
  • QUESTIONS, PRODUCT