text.skipToContent text.skipToNavigation

20A 125V Hard Use Spec-Grade Duplex Receptacle, Back and Side Wire, White

5362W Pass and Seymour

eHard Use Spec Grade Duplex Receptacle Back and Side Wire 20A 125V

Color White

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Corrosion-resistant, plated and tabbed steel strap locked in to face and back body to resist pulling away from face/body assembly.
Two drive screws anchor strap to back body and face where abrupt removal torque is greatest.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face.
8 hole internal screw-pressure-plate back wire terminals accept #10 - #14 AWG solid or stranded copper or copper-clad conductors.
Terminal compartments isolated from each other for positive conductor containment.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
Temperature Rise: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current. Operating Temperature: Maximum continuous +60°C, minimum -40°C without impact

Specifications

General Info

Color	White
Finish	Matte
Application Sector	Commercial
Product Line	Pass & Seymour
Country Of Origin	Mexico
Features	Single Piece Plated Steel Mounting Strap
Wall Plate Included	No
Number of Receptacles	2
Outlet Type	Straight Blade
Warranty Type	1-Year Limited Warranty
Standard	UL 498, FEDSPEC
UPC Number	785007536256

Dimensions

Product Depth US	0.78 in
Product Height US	2.635 in
Product Width US	1.32 in

Listing Agencies / 3rd Party Agencies

cULus ListingNumber	140596
cULus Listed	Yes

Technical Information

Amperage	20 A
Connection Location	Back and Side
Wire Connection Type	Internal Pressure Plates, Screw Terminals
Indoor/Outdoor	Indoor
NEMA Configuration Code	5-20R
Number of Poles	Double Pole
Number of Wires	3
Operating Temperature	-40°-60°C
Operating Temperature Max	60 °C
Operating Temperature Min	-40 °C
Voltage	125.0 V
Wire Size	14 - 10 AWG

Resources

Does HARD USE REC comply with NFPA 70? If so please send me the cut sheet.

Asked by: Anonymous

Thank you for your inquiry. To provide further assistance with your compliance request, please contact Legrand Pass & Seymour Technical Support at (800) 223-4185 between 8:00 a.m. and 6:00 p.m. EST or via email at Tech.Support@legrand.us.

Answered by: Pass & Seymour Technical Support

Date published: 2024-10-28

Where can I find the cut sheet with the screw torque spec?

Asked by: darkestdot

Thank you for your inquiry. The required torque for the terminal screws, including all Legrand/Pass & Seymour Ground Fault Circuit Interrupter (GFCI) Receptacles, and 15, 20, and 30 Amp Switches and Receptacles, are 14 to 18-inch pounds.

Answered by: Pass & Seymour Technical Support

Date published: 2024-10-14