text.skipToContent text.skipToNavigation

Trademaster® 15A 125V Tamper-Resistant Duplex Receptacle, Light Almond

Trademaster® 15A 125V Tamper-Resistant Duplex Receptacle, Light Almond

3232TRLA Pass and Seymour

15A/125A Trademaster Registered Tamper-Resistant Duplex Receptacle

Color Light Almond

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Quality Materials, durability, and time-tested design
Rated 15 amperes
Side wire termination accepts #14–#10AWG solid & stranded wires, Copper-clad aluminum, and copper wire

Specifications

General Info

Color	Light Almond
Product Type	Receptacle
Finish	Matte
Application Sector	Hospitality, Residential
Product Family / Series / Group	Trademaster
Product Line	Pass & Seymour
Country Of Origin	Vietnam
Wall Plate Included	No
Number of Receptacles	2
Outlet Type	Tamper-Resistant
Warranty Type	1-Year Limited Warranty
Standard	UL 498
UPC Number	785007240061

Dimensions

Product Depth US	1.0 in
Product Height US	3.31 in
Product Width US	1.32 in

Listing Agencies / 3rd Party Agencies

cULus ListingNumber	E140596
cULus Listed	Yes

Additional Information

Product Environmental Profile

Yes

Technical Information

Amperage	15 A
Connection Location	Back and Side
Wire Connection Type	Push Wire, Screw Terminals
Indoor/Outdoor	Indoor
Is Tamper-Resistant	Yes
NEMA Configuration Code	5-15R
Number of Poles	Double Pole
Number of Wires	3
Terminal Accommodation	#14 AWG - #10 AWG
Voltage	125.0 V

Resources

I've got an inspector telling me I can't put a wire under each screw making the receptacle as a junction. Where is your listing sheet to show if it has been listed for this. I've been doing this for years and now some inspector is telling me I can't

Asked by: Evenflow

Thank you for your inquiry. To provide further assistance with your request, we require additional information. Please get in touch with Legrand Pass & Seymour Technical Support at (800) 223-4185 between 8:00 a.m. and 6:00 p.m. EST, or via email at Tech.Support@legrand.us.

Answered by: Pass & Seymour Technical Support

Date published: 2024-10-28

is the 3232TRW 20a feed through rated

Asked by: Mark

Hello Mark, No, this device doesn't have a 20 amp feed through rating.

Answered by: Wiremold Tech Support

Date published: 2023-10-26

Is the 3232TR-w suitable for stranded thhn wire?

Asked by: Dominick

Yes, as long as the stranded wire is properly secured(see attached).

Answered by: Legrand Technical Support

Date published: 2026-07-24

need to purchase these. Where can I find them. Willing to mail order.

Asked by: barbara

They can be purchased through any Legrand Retail Supplier or Distributor: https://www.legrand.us/where-to-buy

Answered by: Legrand Technical Support

Date published: 2021-02-24

what size square tip fits the terminal screw on a 3232 or 660 device ?

Asked by: PatN

#1 robertson bit will fit with both devices.

Answered by: Legrand Technical Support

Date published: 2022-08-13

Torque Specs: Box says to “tighten securely”. Accord to 2017 NEC T-I.2, the torque should be 20in-lbs unless the manufacturer states otherwise. At 18in-lbs, the silver (grounded conductor) screw on 3232TRWCP strips. Defective units, or improper torque?

Asked by: JM123

The required torque for the terminal screws, to include all Legrand/Pass & Seymour Ground Fault Circuit Interrupter (GFCI) Receptacles; and 15, 20, and 30 Amp Switches and Receptacles is 14 to 18 inch pounds.

Answered by: Legrand Technical Support

Date published: 2023-03-07