Turnlok® Isolated Ground Receptacle

Turnlok® Plug 3-Wire 20A 125V Isolated Ground

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

UL1449 (latest revision). (1.2 x 50: s 6000V,8 x 20: s 3000A). 140 joules of energy absorption in each of thethree modes. 9,000 amps current handling capability in each of three modes: line to neutral, line to ground, neutral to ground. 1 filtering capacitor for 7 to 1 average noise reduction. Nominal let-through (suppressed) voltage inall 3 modes, 500V. LED indicator light. Response time less than 1 nanosecond for unmounted MOV. Overcurrent protection in all 3 modes. Electronic components potted for electrical, mechanical and thermal stability. Thermal protection in all 3 modes. Leakage current: 0.5 mA at 25: C/120VAC. 3 18mm super MOVs to suppress transients in all modes : equally. Common mode noise attenuation:500 KHz to 30 MHz: up to 35 dB(50 ohm source impedance) Varistor voltage: 150V RMS. Back and side wire capability including ground terminal. Operating temperature: -40: C to 85: C(-40: F to 185: F) Conforms to the latest revision ANSI/IEEE C62.41 (formerly IEEE 587), ANSI/IEEE C62.45.

General Info

Dimensions

Listing Agencies / 3rd Party Agencies

cULus ListingNumber	146159
cULus Listed	Yes

Technical Information

Resources