|RoHS Conformant||Yes||This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.|
Listing Agencies / 3rd Party Agencies
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Will a LC2203 work on a circuit with no other light switches? Or do I need to use a LC2201 on the same circuit? Correct me if I am wrong, but on a 3-way circuit I'll need both the LC2201 and LC2203.
You need the LC2201 which is the master and the LC2203 if you want to create a 3way setup for the same light circuit the LC2201 is on. The LC2203 can not be used by itself without a master
Date published: 2020-09-02
I am lighting a large event room using 15 universal dimmers and a scene controller.I have 3 scenes (15 fixtures per scene). I need a remote switch at 3 different entry areas to correspond with controller.Will that work?
The Remote switches can be bound to the universal master dimmers but not to the scene controller.
Date published: 2020-06-25
I can't install a three-wire between two switch locations. Does Legrand make a switch pairing that can act without a three-wire? That is dimming?
You can use a master dimmer(LC2101WH) and a remote dimmer(LC2103WH). The master is installed to the light and the remote just needs power(HOT & NEUTRAL).
Date published: 2020-03-26
What is the max range of these remote devices?
Good Morning, Typically, the device will reach out to about 100ft. You can also use an extender (MRR2G) to increase the distance. Hope this helps!
Date published: 2019-03-29
Does the switch need to be connected to wifi to work
Hello, A master is needed LC2201-WH for the remote to communicate with. The switches do not need to be connected to the Wi-Fi to work. Hope this helps, Have a great day.
Date published: 2019-03-23