Discontinued - DLM Room Controller, Single Relay, 0-10V, 10A, Metered, USA
LMRC-111-M-U
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
Replaced by LMRC-111-20M-U
LMRC-110 series room controllers include one or two relay(s) to switch a total of 10 amps, a high-efficiency switching power supply and dual 0-10 volt outputs per relay for control of dimmable loads including compatible LED drivers or electronic ballasts. They are the foundation of a Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient control.
Number of Connectors
1
- 1
- 2
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Plenum-rated controllers with line voltage relay(s) and 0-10 volt dimming output(s)
- Knockout mounting for easy installation; Class 1 and/or Class 2 connection for 0-10V wiring
- Available with or without metering (+/- 2% accuracy)
- Plug n’ Go™ automatic configuration for quick installation and maximum energy efficiency
- Store 16 scene preset levels for each load
- Support energy saving manual-on, partial-on and dimming control strategies
Specifications
General Info
| Color | White | ||
| Product Series | LMRC | ||
| Type | Room Controller | ||
| Material | Polycarbonate | ||
| Finish | Glossy | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | United States | ||
| Replaced by Part Number | LMRC-111-20M-U | ||
| Features | Metered | ||
| Installation Location | Ceiling | ||
| Warranty Type | 5-Year | ||
| Standard | UL 924, UL 60730, UL 2043, cUL, FCC part 15, PEP, RoHS 2011/65/EC, ISO 14025:2010, ISO 14001, BAA, TAA | ||
| UPC Number | 754182939589 |
Dimensions
| Product Depth US | 2.0 in | ||
| Product Height US | 4.4 in | ||
| Product Volume US | 44.6 cu in | ||
| Product Width US | 3.9 in | ||
| Product Weight US | 0.6 lb |
Additional Information
| Security | Yes | This product is ioXt certified | |
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Current Draw | 10 A | ||
| Number of Connections | 4 | ||
| Topology | Free Topology | ||
| Wire Connection Type | RJ-45, Terminal Block | ||
| Dimming Compatibility | 0-10 V | ||
| Compatibility | DLM Wired | ||
| Has Battery | No | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 120/277 VAC | ||
| Line Frequency | 50 Hz, 60 Hz | ||
| Location Rating | Dry | ||
| Mounting Type | 1/2 in Knockout, 4 in Deep J-Box | ||
| Number of Relays | 1 | ||
| Operating Temperature | 0°-55°C, 32°-131°F | ||
| Operating Temperature Max | 131 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Output Voltage | 24 VDC | ||
| Storage Temperature | 23° - 176° F |
Resources
Cutsheet
Installation Instructions
CAD Drawings
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can a lmrc 111 control 277 lighting and a 120v recepticle?
The LMRC-111 is engineered exclusively for lighting loads, and it supports both 120V and 277V circuits for that purpose. It is not intended to control receptacles. For managing 120V receptacles or plug loads, you should use a plug load controller such as the LMPL-101 or LMPL-201, which are specifically designed for that application.
Date published: 2025-03-27
I have a LMRC-111 RC and a LMSW-103 switch. One load and no Occ sensor. how do I get the dimming control to work.
The default operation of your switch is to toggle the lights on and off with a button press. To enable dimming control, the buttons need to be reconfigured. This can be done using the LMCT-100-2 Configuration Remote or a laptop with LMCS DLM Software and an LMCI-100 interface.
For step-by-step guidance on reprogramming your switch for dimming functionality, we recommend reaching out to Wattstopper Technical Support, where an expert can assist you with the process using one of the methods mentioned.
Date published: 2025-02-21
Hi Is this the same as a lmrc-111-m ?
Yes, this is a Wattstopper LMRC-111-M.
Date published: 2024-01-22
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
566-115-003 | Quiktron
Q-Series Patch Cords, CAT5E, Non-Booted, Yellow
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
S120RGAC | Pass and Seymour
4-inch Round Ceiling Boxes
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
P1001 | Pass and Seymour
Multi-Weave, Rotating Eye, Gold
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
AS-100-W | Wattstopper
The InteliSwitch® AS-100 Automatic Control Switch operates as both a manual and automatic control device.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNP10 | Pass and Seymour
Plug it in and start controlling lights from anywhere. Part of the radiant with Netatmo solution.
$67.68
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMSW-610-S-BK | Wattstopper
The LMSW-600-S Series Slim Switches are wireless low voltage devices for dimming and/or switching of one or more lighting loads. Ideal for single zone On/Off control in a space.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
S120JGAC | Pass and Seymour
4-inch Round Ceiling Box
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
VWM-RR-4RU | Ortronics
FIXED RAIL KIT FOR VERTICAL WALL-MOUNT CABINET
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMFC-RJ-50-24 | Wattstopper
The LMFC-xRJ provides fixture connectivity to the DLM local network via a single- or dual-port RJ45 wiring whip connector.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WP3475IV |
Quick Connect RJ45 Cat 5e T568 A/B Keystone Insert
$5.24
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
560-100-020 | Quiktron
Q-Series Patch Cords, CAT5E, Non-Booted, Blue
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
FSP-301 | Wattstopper
The FSP-3x1 sensors provide continuous dimming intensity control based on motion and/or daylight contribution.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
EN-CLM-PIR-DD-ZB | Wattstopper
The SensiLUM wireless integrated sensor family enables real-time occupancy detection, daylighting harvesting, and individual or group control of luminaires
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
804025PC010-1GY | Ortronics
25-Pair Cable Assemblies
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
566-110-012 | Quiktron
Q-Series Patch Cords, CAT6, Non-Booted



