DLM Wired Standard Switch, 4B 1R, Red
LMSW-241-RED
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
LMSW-200 Series Wall Switches are programmable, low voltage devices for manual on/off, dimming, and scene control of one or more loads from one or more locations. They are part of the Digital Lighting Management (DLM) system and can control any load(s) connected to DLM room controllers.
BAA
No
- No
- Yes
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Software lockable configuration button, accessible without faceplate removal
- Digital Lighting Management components plug together on a free-topology Category 5e DLM local network
- Infrared (IR) transceiver for wireless configuration and control
- Switches may be used for multi-way control
- Each button and rocker can control individual or multiple loads. Buttons can instead control one scene. LED indicates status.
- Each button can be used to dim assigned loads
- Custom engraving available to replace standard engraving
- Sleek single gang devices fit decorator wall plates
- The product meets the materials restrictions of RoHS
- BAA compliant options available
Specifications
General Info
| Color | Red | ||
| Product Series | LMSW | ||
| Type | Switch | ||
| Finish | Matte | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | United States | ||
| Number of Switches | 5 | ||
| Switch Type | Push, Rocker | ||
| Warranty Type | 5-Year | ||
| Standard | UL, cUL, FCC part 15, RoHS | ||
| UPC Number | 754182000395 |
Dimensions
| Product Depth US | 1.6 in | ||
| Product Height US | 4.1 in | ||
| Product Volume US | 20.3 cu in | ||
| Product Width US | 1.6 in | ||
| Product Weight US | 0.1 lb |
Additional Information
| Product Has Potential to Contribute to LEED | Yes | This product contributes to earning credits in the LEED rating system. Visit our LEED with Legrand webpage for more information. |
Technical Information
| Current Draw | 5 mA | ||
| Number of Rockers | 1 | ||
| Seismic Tested | No | ||
| Topology | Free Topology | ||
| Wire Connection Type | RJ-45 | ||
| Compatibility | DLM Wired | ||
| Environmental Conditions | 5 to 95% (relative humidity, non-condensing) | ||
| Has Battery | No | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 24 VDC | ||
| Location Rating | Dry | ||
| Mounting Type | J-Box | ||
| Number of Buttons | 4 | ||
| Operating Temperature | 0°-55°C | ||
| Operating Temperature Max | 55 °C | ||
| Operating Temperature Min | 0 °C | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Storage Temperature | 23° - 176° F, -5° - 80° C | ||
| Engraving Type | Icon | ||
| Wattage | 0.12 W |
Resources
Installation Instructions
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can you show me a wiring diagram showing two LMSW-241 switches using six LMAC-131 power packs controlling six seperate curcuit loads. Also have two LMSW-241 switches using twoLMAC-131, three LMRC-111, and two LMRC-112 power packs.
There isn’t a wiring diagram that shows that exact combination of devices connected together. However, the installation guides for each listed device outline how they interconnect within a DLM system. These devices can be combined in various configurations as long as DLM network rules are followed:
🔹 Maximum 150 ft of Cat5 between any two devices
🔹 Maximum 1,000 ft total Cat5 length per IRB
🔹 No loopbacks
🔹 Up to 48 devices and 64 loads per IRB
As long as these limits are observed, your described setup should function properly. Please contact Wattstopper Technical Support if additional clarification is needed.
Date published: 2025-10-21
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
RSVC-PHNE | Wattstopper
Dedicated Phone Support