text.skipToContent text.skipToNavigation

Wireless Commissioning Tool for Fixture Mount Sensors

FSIR-100 Wattstopper
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 29ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

The FSIR-100 Wireless IR Configuration Tool is a handheld tool for remote configuration of IR-enabled fixture integrated sensors. The tool enables device modifications via pushbutton, without ladders or tools, and stores up to six sensor parameter profiles to speed configuration of multiple sensors.
  • Send
  • Save as PDF
  • Add to favorites Remove from favorites

Features

  • Enables fast ladder-free setup and maintenance
  • Easy-to-read OLED screen
  • Allows precise configuration with greater granularity than dip switches or trimpots
  • 2-way IR communication for data upload, download, confirmation and storage
  • Easy-to-use navigation pad
  • Configures IR-enabled fixture sensors including selected HBP and FSP models

Specifications

General Info
Product Line Wattstopper
UPC Number 754182931224
Country Of Origin China
Warranty Type 5-Year
Dimensions
Product Width US 5.0 in
Product Weight US 0.5 lb
Product Volume US 32.55 cu in
Product Depth US 3.15 in
Product Height US 1.81 in
Additional Information
RoHS Conformant Yes This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
DesignLights Consortium Qualified System Yes
Security   Yes This product is ioXt certified
Technical Information
Sensing Range Up to 32 ft

Reviews

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 6ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Questions & Answers

can sensor be programmed so fixture comes on full bright during motion under daylight, but during motion at night it comes on dimmed?

Asked by: jj
Hi JJ, Sorry, no you cannot set different dimming values for day/night. Thanks,
Answered by: Tier 1 Tech Support
Date published: 2024-03-04

Hello, will this remote work with the Cree FSP-2X1 sensor?

Asked by: Carlos D
Yes it will.
Answered by: Tier 1 Tech Support
Date published: 2024-02-21

Is it possible to completely disable the controls where the fixture will just stay active at all times ?

Asked by: William Case
Hi William, Yes, if you use the settings below and that will hold the fixtures on at full brightness. Please reach out to our tech. support team for further assistance if required. Legrand Technical Support: Phone: 1 800-879-8585, Option 3 then Option 1 Mon - Fri: 7am - 7pm CST (excluding holidays)
Answered by: Tier 1 Tech Support
Date published: 2024-01-19

I have a set point 4 and photocell 1. The lights turn off during the day. At night the lights only turn on when motion is detected. What setting do I need to keep lights on all night to low level, then switch to high level when motion is detected

Asked by: Shaun
Hello Shaun, Please see a common FSP profile with settings below to accomplish the requested High/Low/Photocell Hmode: 10v Lmode: 1v=10% light output, end-users choice of low mode Tdelay: 10min Cut off: DIS Setpoint: DIS Fade up: DIS Fade down: DIS Photocell: 30FC
Answered by: Tier 1 Tech Support
Date published: 2023-11-07

Can you use the remote to program fixtures in a group or do they need to be individually adjusted

Asked by: Kevin
Hi Kevin, Each fixture communicates directly with the remote so each fixture will have to be individually adjusted. The remote does allow you to save common setups for ease of recall and future use if required.
Answered by: Tier 1 Tech Support
Date published: 2023-03-07

Can't get remote to work

Asked by: Anonymous
I suggest calling 1-800-879-8585 Option 1 for Technical Support. We can discuss what may be going on with the remote and different setup recommendations.
Answered by: Tier 1 Tech Support
Date published: 2022-05-31

I have an FSIR-100-RU and do not see a setting option for photocell on or off. These are outdoor fixtures

Asked by: Bruce
The range for the Photocell setting is 0-250 fc & DIS. DIS means disable and if you select that, the photocell will be off.
Answered by: Tier 1 Tech Support
Date published: 2023-10-24

Is it possible to update firmware on these?

Asked by: GCB
No, it is not possible to update a FSIR-100 remote.
Answered by: Tier 1 Tech Support
Date published: 2022-04-13
  • y_2024, m_3, d_27, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_FSIR-100, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 3ms
  • QUESTIONS, PRODUCT