text.skipToContent text.skipToNavigation

Front of PIR Ceiling Occupancy Sensor 24VDC/AC, Isolated Relay

Discontinued - PIR Ceiling Occupancy Sensor, 500 sq ft, 24VDC

Replaced by CI-300-1

Wattstopper’s CI-200 Series Passive Infrared (PIR) Ceiling Sensors provide 360° coverage to detect occupancy in the controlled area. These low-profile sensors reliably control lighting in a variety of applications.

Contact Rating 1 A @ 30 VDC/VAC

1 A @ 30 VDC/VAC

Footprint 500 sq ft

500 sq ft

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

360° coverage
User-adjustable time delay and sensitivity
Low-profile design
Built-in light level sensor
Isolated relay for use with HVAC or other control systems
ASIC enhances reliability and helps eliminate false triggers
Automatic or manual-on operation when used with a BZ-150 Power Pack

Specifications

General Info

Product Line	Wattstopper
Country Of Origin	China
Replaced by Part Number	CI-300-1
UPC Number	754182913299

Additional Information

DesignLights Consortium Qualified System	Yes
Security	Yes	This product is ioXt certified
RoHS Compliant	Yes	This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

Sensor Type	Occupancy
Sensor Technology	Passive Infrared (PIR)

Resources

I have a ci 200 series installed in some massage rooms. They are at max setting of 30 minutes and the lights are coming on halfway through a 1 hour session. Is there a solution for this?

Asked by: Mike

Please reach out to our tech. support team for further assistance with over-riding this sensor. Legrand Technical Support: Phone: 1 800-879-8585, Option 3 then Option 1 Mon - Fri: 7am - 7pm CST (excluding holidays)

Answered by: Tier 1 Tech Support

Date published: 2023-03-07

If I set the dip switch 6 to on/enable override, Does the sensor still do auto off or will the sensor be manual on/manual off?

Asked by: Frank

setting DIP switch #6 to bypass will override all the sensor’s occupancy control functions. Lights can still be manually on/off controlled with a light switch.

Answered by: Tier 1 Tech Support

Date published: 2023-12-15

Lights cycle on and off , been install for 10 years , just start this issue, power supply BZ-50 or sensor CI-205 problem? Are sensor W-500A and W-1000A obsolete ? if so what Replacement recommend ?

Asked by: Michael Brown

Most likely the power pack is the cause. W500A DISC REC SUB UT3051 W1000A DISC REC SUB UT3052

Answered by: Legrand Technical Support

Date published: 2022-10-24

I would like to completely disable the sensor. How can I do this?

Asked by: MSSLA

Place all of the dip switches in the On position except for number 6, it will remain Off. This will place the sensor into Service mode.

Answered by: Tier 1 Tech Support

Date published: 2025-10-24

Discontinued - PIR Ceiling Occupancy Sensor, 500 sq ft, 24VDC

Replaced by CI-300-1

Features

Specifications

Resources

Cutsheet

Instruction Sheet

CAD Drawings

Specifications

Case Studies

Reviews

Questions & Answers

I have a ci 200 series installed in some massage rooms. They are at max setting of 30 minutes and the lights are coming on halfway through a 1 hour session. Is there a solution for this?

If I set the dip switch 6 to on/enable override, Does the sensor still do auto off or will the sensor be manual on/manual off?

Lights cycle on and off , been install for 10 years , just start this issue, power supply BZ-50 or sensor CI-205 problem? Are sensor W-500A and W-1000A obsolete ? if so what Replacement recommend ?

I would like to completely disable the sensor. How can I do this?

Recently Viewed