text.skipToContent text.skipToNavigation

Front of 0-10V PIR DROP MT SENSOR BLE LENS -GREY

Side of 0-10V PIR DROP MT SENSOR BLE 1 20-480V LENS -GREY

Underside of 0-10V PIR DROP MT SENSOR BLE LENS -GREY

Back of 0-10V PIR DROP MT SENSOR BLE LENS -GREY

0-10V PIR STRAIGHT MT SENSOR BLE 120-277V 40FT LENS - GREY

FSP-311B-S-L7-G Wattstopper

The FSP-3x1B sensors provide continuous dimming light level control based on motion and/or daylight contribution. They control 0-10 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an FSP-Lx Lens, are rated for wet and cold locations. All control parameters are adjustable via the iOS or Android Sensor Configuration App capable of storing and transmitting sensor profiles. The FSP-3x1B family is available in three configurations for mounting inside a fixture, to the outside of a fixture via a 1/2” knockout, or to a pole.

Color Gray

Sensor Mounting Height 40 ft

8 ft
20 ft
40 ft

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Designed for LED fixtures and rated for extreme temperatures; options for box or pole mounting
Fully adjustable high and low dimmed light levels
Hold off setpoint with automatic calibration option for convenience and added energy savings
Continuous dimming & daylight harvesting for energy efficiency and energy code compliance
Adjustable via the iOS® or Android® Sensor Configuration App
IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8’ to 40’
Adjustable time delay and cutoff delay

Specifications

General Info

Color	Gray
Product Series	FSP-3x1B
Type	Sensor
Material	Polycarbonate
Finish	Glossy
Application Sector	Commercial
Product Line	Wattstopper
Country Of Origin	China
Features	Adjustable Time Delay, Flame Retardant, Impact Resistant, Light Level Sensor, Recyclable, Sensitivity Adjustment, UV Resistant
Included	Collar
Installation Location	Enclosure
Warranty Type	5-Year
Standard	UL, cUL, CE, IP66 Rated, RoHS, E101196
UPC Number	754182941452

Dimensions

Product Height US	2.765 in
Product Volume US	60.079 cu in
Product Width US	6.024 in
Product Weight US	0.5767 lb

Additional Information

RoHS Compliant

Yes

This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Technical Information

On Function	Auto On
Wire Connection Type	Flying Leads
Compatibility	Bluetooth
Has Battery	No
Indicator	PIR Detection LED
Indoor/Outdoor	Both
Input Voltage	120/277 VAC
Line Frequency	50 Hz, 60 Hz
Load Rating	1200 W @ 277 VAC, 300 W @ 230-240 VAC, 800 W @ 120 VAC
Location Rating	Wet
Mounting Type	Fixture Embedded, Straight Nipple
Timer Type	Digital
Timer Duration	30 Seconds, 5-30 Minutes
Operating Temperature	-40°-140°F, -40°-60°C
Operating Temperature Max	140 °F
Operating Temperature Min	-40 °F
Operating Humidity	5-95% RH (Non-Condensing)
Horsepower Rating	1/6 HP @ 120/277 VAC
Sensing Range	100 ft diameter
Sensor Type	Daylight, Occupancy
Sensor Technology	Passive Infrared (PIR), Photosensor
Sensor Coverage Pattern	360 °
Sensor Mounting Height	40 ft
Storage Temperature	-40° - 176° F, -40° - 80° C

Resources

I have FSP-311B-S and am using them outdoors. I need to configure the sensor so that the light is off during daylight. I reduced the photocell setting down to its lowest 1 FC and it still remains on.

Asked by: Julie Jurgens

Please call Wattstopper Technical Support to troubleshoot this issue. 1-800-879-8585 Option 1.

Answered by: Tier 1 Tech Support

Date published: 2021-09-15

Recently Viewed

Aluminum Cord Grip, 3/4-in 45-Degree, .62-.75 OD Range

CG7545750 | Pass and Seymour

Deluxe Aluminum Cord Grips are UL Listed and CSA Certified for use in both indoor and outdoor applications to prevent cable pullout, to control arc of bend, and to provide a tight seal against environmental elements such as dirt, moisture and coolants.

View Details