Fixture Integrated Daylight Dimming Photosensor
FD-301
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
The FD-301 Fixture Integrated Daylight Dimming Photosensor is a low voltage controller that works with standard 0-10 VDC electronic dimming ballasts to control electric lighting in response to daylight.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Product Details
The FD-301 Fixture Integrated Daylight Dimming Photosensor is a low voltage controller that works with standard 0-10 VDC electronic dimming ballasts to control electric lighting in response to daylight.
- Provides automatic dimming based on ambient light levels
- Handheld remote for quick, easy setup without tools or ladders
- Controls standard 0–10 VDC electronic dimming ballasts
- Works with optional occupant controls for temporary adjustments
- Single zone, closed loop daylighting control
- Sliding setpoint prevents over or under dimming
Specifications
General Info
| Color | White | ||
| Product Type | Sensor | ||
| Material | ABS | ||
| Finish | Gloss | ||
| Application Sector | Commercial | ||
| Product Family / Series / Group | Standalone | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Installation Location | Fixture | ||
| Warranty Type | 5-Year | ||
| Standard | UL, RoHS | ||
| UPC Number | 754182921485 |
Dimensions
| Product Depth US | 1.0 in | ||
| Product Height US | 1.0 in | ||
| Product Volume US | 78.0 cu in | ||
| Product Length US | 78.0 in | ||
| Product Weight US | 2.7 oz |
Additional Information
| DesignLights Consortium Qualified System | Yes | ||
| Security | Yes | This product is ioXt certified | |
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Current Draw | 30 mA | ||
| Compatibility | FS-PP, LSR-301-S | ||
| Control Algorithm | Closed Loop | ||
| Has Battery | No | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 24 VDC | ||
| Load Rating | 50 mA @ 24 VDC | ||
| Mounting Type | Fixture Embedded | ||
| Operating Temperature | 32°-131°F | ||
| Operating Temperature Max | 131 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Sensing Range | 1-1500 fc | ||
| Sensor Type | Daylight | ||
| Sensor Technology | Photosensor | ||
| Storage Temperature | 23° - 140° F |
Resources (6)
Installation Instructions
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Q & A
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
ESRN | Wattstopper
The Wattstopper PLUS ESRN Emergency Lighting Load Control Relay is designed for applications that require an emergency load to be switched on during a loss of normal power.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
EN-PCDM-GB2 | Wattstopper
The Phase-Cut Dimming Module (PCDM) provides an interface between the phase-cut dimmable (forward- and reverse-phase) luminaires and the Wattstopper PLUS Lighting Control System.
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMRC-213 | Wattstopper
LMRC-210 Series Digital Room Controllers include one, two or three relay(s) to switch a total of 15 or 20 amps, a highefficiency switching power supply and one 0-10 volt output per relay for control of dimmable loads including electronic ballasts (Advance Mark 7, or equivalent).
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMPL-101 | Wattstopper
LMPL-101 Plug Load Controllers include a 20 amp relay for on/ off control of connected outlets, and a high-efficiency switching power supply.
