DLM Enhanced Plug Load Controller, On/Off, 120V, 60Hz
LMPL-201
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
LMPL-201 Plug Load Controllers include a 20 amp relay for on/ off control of connected outlets, and a high-efficiency switching power supply. They are part of a Wattstopper Digital Lighting Management (DLM) system, and enable energy-efficient control of plug loads.
Voltage
120 VAC
- Send
- Save as PDF
-
FavoriteAdded to Favorites Go to favoritesRemove from favorites?
Features
- Plenum-rated controller with line voltage relay and switching power supply
- Component of Digital Lighting Management integrated control systems
- Plugs to other components using Cat 5e cable and RJ45 connectors eliminating wiring errors
- Plug n’ Go automatic configuration and Push n’ Learn for personalization
- Integral current monitoring of total connected load
- Accepts occupancy sensor signal for energy saving control of plug loads
Specifications
General Info
| Product Line | Wattstopper | ||
| UPC Number | 754182928842 | ||
| Country Of Origin | China |
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
How to reset LLMR 213 WATTSTOPPER.?
To reset an LMRC-213, you press and hold the CONFIG button for 5 seconds. You will see the red LED begin to flash rapidly. Press and hold the same CONFIG button for another 20 seconds. When the LED again begins to flash the LMRC is reset. * Please note that this will affect other DLM devices attached to the LMRC as well. For further assistance please call Wattstopper Technical Support @ 800-879-8585.
Date published: 2022-04-04
Is there a wired (rj45) temperature sensor for wattstopper operation (instead of occupancy sensor)? Project: outdoor temperature sensing, to control hardwired on/off plug power (to heat mats for snow melt).
Unfortunately no, Wattstopper does not offer a temperature controlled sensor device.
Date published: 2022-02-01