DLM Dual Relay Room Controller, On/Off, 120-277V
LMRC-102
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
LMRC-100 Series Digital Room Controllers include one or two relay(s) for on/off control of a total of 20 amps, and a highefficiency switching power supply. They are the foundation of a Wattstopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting sensors and switches for energy-efficient lighting control.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Plenum-rated controllers with line voltage relay(s) and switching power supply
- Components of Digital Lighting Management integrated control systems
- Plug to other components using Cat 5e cables with RJ45 connectors eliminating wiring errors
- Plug n’ Go automatic configuration for maximum energy efficiency
- Support energy saving manual-on and bi-level lighting control strategies
Specifications
General Info
| Color | White | ||
| Product Series | LMRC | ||
| Type | Room Controller | ||
| Finish | Glossy | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Installation Location | Ceiling | ||
| Warranty Type | 5-Year | ||
| Standard | UL 2043, cUL, FCC part 15, PEP, ISO 14025:2010, ISO 14001, RoHS 2011/65/EC | ||
| UPC Number | 754182926237 |
Dimensions
| Product Depth US | 1.9 in | ||
| Product Height US | 3.9 in | ||
| Product Volume US | 44.6 cu in | ||
| Product Width US | 4.4 in | ||
| Product Weight US | 0.62 lb |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Current Draw | 20 A | ||
| Number of Connections | 3 | ||
| Topology | Free Topology | ||
| Wire Connection Type | RJ-45 | ||
| Dimming Compatibility | On/Off | ||
| Compatibility | DLM Wired | ||
| Has Battery | No | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 120/230/240/277 VAC | ||
| Line Frequency | 50 Hz, 60 Hz | ||
| Load Rating | 20 A @ 120/230/240/277 VAC | ||
| Mounting Type | 1/2 in Knockout, 4 in J-Box | ||
| Number of Relays | 2 | ||
| Operating Temperature | 0°-40°C, 32°-104°F | ||
| Operating Temperature Max | 104 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Output Voltage | 24 VDC | ||
| Storage Temperature | 23° - 176° F |
Resources
Cutsheet
Installation Instructions
CAD Drawings
BIM Models
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
What causes the LMRC-101 to beep?
The LMRC-101, like all other DLM devices, is not designed to produce any audible beeps or sounds. If a beeping noise is heard, it is not coming from the LMRC-101 or any other Wattstopper device. The source of the sound is likely an unrelated piece of equipment in the surrounding environment. We recommend checking nearby devices that may have audible alerts or notifications.
Date published: 2025-03-27
can this controller be put in a manual mode to over ride the motion sensor?
Hi Roy,
The sensor can be overridden directly at the sensor itself. Pressing the "Feature" button until you see "T-Delay" then using the down button to drop the time delay down past 1 minute, you will see "Over". Leave it there and the sensor will be completely overridden until you set it back.
If you would like for someone to walk you through the process, please call 1-800-879-8585 Options 1.
Date published: 2021-08-10
Bazaarvoice SAP Hybris Integration Version 2.8.1