News: Legrand acquires Connectrac®
Leader in the development of flexible floor-based cable management solutions that bring power, data and communications to commercial interior applications.
Outdoor Wireless Access Point
Sorry! That combination does not exist.
Find a Store
General Info
Secure Environment: Encryption: 64/128-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X; Wireless Security: LAN ACL (Access control List) filtering, Wireless MAC address filtering, Supports WPS (WiFi Protected Setup), Enable/Disable SSID Broadcast;
Discontinued: Yes
Superceded By: DA2131-V1A
Cable Type: Cat 5, Cat 5e, Cat 6, Cat 6a
Category Performance Application: Transmission/Emission Type: DSSS / OFDM; Data Modulation Type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Color: White
Typical Applications: Residential
Connection Type: Antenna: Internal (default) 12dB Bi Directional Antenna (Vertical-Pol) Horizontal 60 degrees, Vertical 30 degrees; External (optional) RP-SMA Type Connector, Switchable by software, for External Antenna Mode, attach antenna before power on
Type: Outdoor Wireless Access Point
Component Type: 150Mbps 802.11n Wireless Access Point
Wiring Method: Wireless: IEEE 802.11b/g/n; LAN: 1x10/100 Base-TX, Auto-MDI/MDIX; WAN: 1x10/100 Base-TX
Assembly/Installation Information
Installation Tips: PoE: Passive PoE / 12VDC, Reset Button on PoE Injector, LAN RJ45 Pin Assignment: Pin 4(+), Pin 7,8 (-), Pin 5 (Reset)
Listing Agencies/Third Party Certifications
RoHS: Yes
FCC Standard: Yes
Construction Information
Installation Location: On Wall
Depth (Metric): 77 mm
Depth (US): 3.0"
Height (Metric): 60 mm
Height (US): 2.5"
Width (Metric): 225mm
Width (US): 8.75 in
Product Weight (US): 0.60 lb
Weight Metric: 255g
Technical Information
AC Voltage Input: 100V - 240V AC
Amps: 1A
Category Rating: Data Rate: 802.11b - 11, 5.5, 2, and 1 Mbps with auto-rate fall back; 802.11g - 54, 48, 36, 24, 18, 12, 9, and 6 Mbps; 802.11n (20MHz) - up to 72 Mbps; 802.11n (40MHz) - up to 150 Mbps.
Compatible Power Supplies: 12V 1A Power Supply and POE Injector included
Connection Method: Network Protocol - LAN: Built-in DHCP server supporting static IP address distributing, UPnP, IGMP Proxy, DNS Proxy, 802.1d STP (Spanning Tree Protocol); WAN: Static IP, DHCP (Dynamic IP), PPPoE, PPTP, L2TP; VPN Passthrough: PPTP, L2TP, IPSec
External Power Input: PoE (Power Over Ethernet)
Frequency: 2.4 GHz - 2.4835GHz
Humidity: 10% to 95% non-condensing
Jack Connectors: RJ45
LAN Ports: 1
Mounting: Wall
Operating Temperature (Celsius): -20° to 70° Celsius
Performance Rating: RF Output Power - 802.11b: 27 +/- 1dBm, 802.11g: 26 +/- 1dBm, 802.11n: 22 +/- 1dBm
Power Requirements: 12VDC @ 1A
Reset: Button on POE Injector
Storage Temperature: -30° to 80° Celsius
Supported Standards: IEEE802.11b/g; IEEE 802.11n; IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX IEEE 802.3x Flow Control
Volts (DC): 12V DC
Connection Location: 1x RJ45 for signal and power
Equipment Type: Bridge, Gateway, Ethernet Converter (WISP)
Eco-Benefit Information
RoHS Compliant