COVID-19 Update
A message from John Selldorff on the COVID-19 virus and what LNCA is doing in response.
30 AMP L1430 Turnlok Locking Plug
Sorry! That combination does not exist.
Find a Store
General Info
Type: Turnlock, locking Plug
Listing Agencies/Third Party Certifications
RoHS: Yes
CSA Listing Info: No
CSA Standard: Yes
Federal Spec: Yes
UL Listing No: 498
UL Standard: Yes
UN SPSC: 39121403
Diameter (US): 2.20"
Length (US): 3.75"
Technical Information
Amps: 30A
NEMA Configuration Number: L1430
Volts: 250V
Buy American Act Compliance
Country Of Origin: MEXICO
Buy American Act Status: Trade Agreement Act Compliant
This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
You Might Like
Strain Relief Grips
(0 Reviews)
30 Amp NEMA L1430 Connector - Black Back, White Front Body
30 Amp NEMA L1430 Connector - Black Back, White Front Body
(0 Reviews)
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 46ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

what kind of warranty do these plugs have?

Asked by: Mike
The Turnlok plug is covered by Limited One Year Product Warranty: Obtaining Warranty Service: If the device fails due to manufacturing defect during normal use, return the device for replacement to the store where purchased or send to: Pass & Seymour/Legrand, 50 Boyd Avenue, Syracuse, NY 13209 Or contact us directly: Pass & Seymour products 1.800.223-4185 opt 1 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us -
Answered by: Legrand Technical Support
Date published: 2019-12-16

There is no W for neutral on my plug or silver screw. Which pin is the neutral? For the L1620-P

Asked by: Ruru
On the L16-20P there are 3 Hot wires and 1 ground wire. There is no Neutral wire used on this plug The Hot wires will go to the terminals labeled X,Y,Z The Ground goes to the green screw
Answered by: Legrand Technical Support
Date published: 2019-02-25

Are the red and blk wires interchangeable as "hot" wires?

Asked by: Gerry
Thank you for your question regarding Pass & Seymour 30A Turnlok Plug(Model # L1430P). It needs to be wired as follows: Terminals: X - HOT wire Y - HOT wire W - Neutral wire G - Ground Either hot wire can go to X or Y terminals.
Answered by: Legrand Technical Support
Date published: 2019-08-29

What size wire will it accept?

Asked by: Tommy
Good Morning, The plug will accept #18 AWG min - #8 AWG max. Hope this helps!
Answered by: Tech Support
Date published: 2019-08-29

My wires going to your plug, is green, red black ,white, this for a generator 240 plug to adapt to a 50 amp receptacle for my RV

Asked by: Wild Bill
The L1430P is a 30A plug. X = Hot Y= Hot G= ground W= Neutral
Answered by: Legrand Technical Support
Date published: 2018-12-26

30 AMP L1430 Turnlok Locking Plug , how is this wired. I am putting it to a 30 amp stick welder with a three prog plug. I have to make a adapter for it. which wires go to which lug?

Asked by: ben80
The L1430P is rated 30A, 125/250V and would be wired as follows: Terminals: G - Ground, W - Neutral, X - Hot, and Y - Hot.
Answered by: Legrand Technical Support
Date published: 2019-08-29

Why is the end of the plug changing from green to red

Asked by: Roballtheway
  • y_2020, m_5, d_27, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_L1430P, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, net_sdk,
  • CLOUD, getReviews, 31ms
  • bvseo-msg: The getReviews method is only supported when is configured for structured markup. Please submit a support ticket at to have your Bazaarvoice configuration updated to use for structured markup.;