text.skipToContent text.skipToNavigation

Cablobend54/150Ez

Every data center requires numerous cable tray bends and drops—sometimes thousands in just one installation. With traditional cutting and bending, each drop can take over four hours to complete. With Cablobend Systems, you have the freedom to flexibly create the bends and drops that you need. No more cutting unless shortening the length.

Color Silver

Height 2.0 in

2.0 in
4.0 in
6.0 in

Width 6.0 in

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Adjustable mesh tray fitting.
Easy-to-bend flex wires. The quickest up-and-down bends in the industry.
Shrink your installation time to just minutes per bend with zero cutting required on thousands of bends in a single project.
Wide range of adjustability. Vertical and horizontal angle adjustability to 90° to fit any configuration.
Available in three heights (2””, 4”” and 6””), five widths (6””, 8””, 12””, 18”” and 24””) and two finishes (EZ and BL).
Safer installation, no need for cutting tools and less time on elevated areas for installation.
Rigidity clips included to fasten sections together for added strength depending on your needs.
Pre-made and pre-assembled for increased prefab efficiency.

Specifications

General Info

Color	Silver
Type	Bends
Material	Carbon Steel
Finish	Electroplated Zinc
Application Sector	Commercial, Industrial
Product Line	Cablofil
Country Of Origin	United States
UPC Number	800388484467

Dimensions

Product Depth US	18.0 in
Product Height US	2.0 in
Product Volume US	0.278 cu ft
Product Width US	6.0 in
Product Weight US	1.59 lb

Listing Agencies / 3rd Party Agencies

cULus Listed

Yes

Trade Programs

USMCA	Yes
BAA	Yes
TAA Compliant	Yes

Additional Information

RoHS Compliant

Yes

This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.

Resources

cat 6A cable fill capacity in the 24"x4" cable tray

Asked by: Frank

497 cat6a cables with a 0.35" diameter can be installed in tray system CF105/600EZ (4" x 24" mesh tray)

Answered by: Cablofil Tech Support

Date published: 2023-12-26

Where is this product manufacturered?

Asked by: Agent007

The Cablobend is manufactured in the United States

Answered by: bobc

Date published: 2022-10-15

Recently Viewed

Pin & Sleeve Watertight 30A 3ø 250V Receptacle

PS430R9W | Pass and Seymour

30A Pin & Sleeve Watertight Connector

View Details

30A 125/250V 14-30R Straight Blade Single Flush Receptacle, 3-Pole, 4-Wire

3864 | Pass and Seymour

Power Outlets

View Details

TRACJACK, SC, DUPLEX, FLUSH MOUNT

63700077-43 | Ortronics

TRACJACK,SC, DUPLEX, FLUSH MOUNT, FOG WHITE

View Details

Turnlok® Spec Grade Locking Devices, 30A Single Receptacle

L630R | Pass and Seymour

Turnlok 30A/250V single receptacle, 3-wire

View Details

50A 480V California Standard Single Receptacle, 3-Pole 4-Wire, Black

CS8169 | Pass and Seymour

California Standard 4-Wire Receptacle

View Details

radiant® Dead Front 20A Duplex Self-Test GFCI Receptacles with SafeLock® Protection, White

2087W | radiant Collection

Dead front GFCI receptacle self-tests every 3 seconds for superior ground fault protection.

$28.39

View Details

30A 125V TT30 Straight Blade Single Flush Receptacle, 3-Pole, 3-Wire

3830 | Pass and Seymour

Power Outlets

View Details

15A, 125V Dual-Controlled Plug Load Controllable Receptacle, Gray

5262CDGRY | Pass and Seymour

UL498 (File No. E140596)Fedl Spec WC-596 CSA Standard C22.2 No. 42 (File No. LR16063) Conforms to NEMA WD-1 and WD-6

View Details

7.1 Home Theater Connection Kit, White

WP9009WHV1 |

7.1 Home Theater Connection Kit in Light Almond

$73.53

View Details

42-inch Plastic Enclosure with Trim Ring and Hinged Door

ENP4250NA |

Low-profile, USA-made 42-in Wi-Fi transparent plastic enclosure deisgned to integrate wireless devices into traditional structured wiring installations

$195.69

View Details