text.skipToContent text.skipToNavigation

New Construction Slides Contractor 25-Pack

65501 Pass and Seymour

Slide Fan Support Heavy Duty Slide With Standard Box rotating dual support for 16 to 24 inch spans 25-Pack

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

For spans from 16 to 24 inches
UL listed for fan ( up to 70 lbs) and fixture support (up to 110 lbs)
Self-leveling feet
Maximum weight rating shown for 16 inch spans
Ground screw pre-installed
Boxes include top knockouts
16 cubic inch volume
1.5 inch depth

Specifications

General Info

Product Line	Pass & Seymour
Country Of Origin	China

Resources

Is this product 1 hour rated?

Asked by: Matt

Thank you for your inquiry. We require additional information to assist you further with your request. Please contact Legrand Pass & Seymour Technical Support at (800) 223-4185 between 8:00 a.m. and 6:00 p.m. EST or via email at Tech.Support@legrand.us.

Answered by: Justin

Date published: 2024-06-10

65501 box does not hang low enough for the fire rated ceiling. Is it acceptable to drill two new holes in the end plate support above the existing ones?

Asked by: George

Hello, We cannot recommend drilling or altering the part number 65501, as it will void the UL listing. Best Regards, Technical Support

Answered by: Justin

Date published: 2024-03-28

Hi we want to install a 20 lbs pendant light, the builder installed the box but the 10 32 screw were not provided ,can I buy my own 10 32 screw and install the pendant. Wanted to ask why the fixture has two settings one for fixture and other for fan

Asked by: Anonymous

Yes you can use your own screw as long as it's the same size. The box has 2 separate weight ratings one for a fan (70lb) and the other for a lighting fixture (110lb).

Answered by: Wiremold Tech Support

Date published: 2023-12-14

Is the connecter built into the 65501 rated for NM Wire (Romex)? I have a inspector looking for documentation stating that it is but we can't find anything that talks about the connecter.

Asked by: Cris Winn

The internal clamps usually have an “N” stamped into them indicating they are rated for use with NM cable. Also the hardware packet has a rubber grommet that can also be used in the knockouts for NM wire(romex cable).

Answered by: Legrand Technical Support

Date published: 2022-10-19

New Construction Slides Contractor 25-Pack

Features

Specifications

Resources

Cutsheet

Brochure

Supporting Document

Reviews

Questions & Answers

Is this product 1 hour rated?

65501 box does not hang low enough for the fire rated ceiling. Is it acceptable to drill two new holes in the end plate support above the existing ones?

Hi we want to install a 20 lbs pendant light, the builder installed the box but the 10 32 screw were not provided ,can I buy my own 10 32 screw and install the pendant. Wanted to ask why the fixture has two settings one for fixture and other for fan

Is the connecter built into the 65501 rated for NM Wire (Romex)? I have a inspector looking for documentation stating that it is but we can't find anything that talks about the connecter.