





adorne® Motion Sensor Switch Manual On/Auto Off, White
ASVS12W4
adorne Collection
adorne Motion Sensor Switch Manual On Auto Off is rated
out of
5 by
3.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$50.59 USD
Perfect for anywhere you might want to manually turning lights on, but know they'll turn off automatically, such as children's bedrooms.
The adorne Manual On/Auto Off Motion Sensor Switch provides combination control by allowing you to manually turn lights on when entering a room, and automatically turn the lights off for you when you leave, thanks to motion-sensing technology. Use this device on its own to control a light or fixture from a single location one location, or combine with additional switches for controlling a single light source from multiple locations in 3 or 4-way applications. (four-way operation).
Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
Quantity
In Stock
- Send
- Save as PDF
-
FavoriteFavoriteAdded to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
- Uses SensaSwitch technology to automatically turn lights off after you leave. (Auto shut-off can be set from 5 to 30 minutes after vacancy.)
- Usable in single-pole or 3-way applications. Must be paired with another SensaSwitch or SensaDimmer for 3-way control.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a stunning, screwless adorne® Wall Plate, not included. Available in a range of contemporary colors and finishes. Coordinate with other designer switches & outlets.
Specifications
General Info
Product Line | Pass & Seymour | ||
Color | White | ||
UPC Number | 78500702344 | ||
Country Of Origin | China | ||
Features | Motion Sensor | ||
Switch Type | Motion Sensor | ||
Number of Switches | 1 | ||
Standard | cULus |
Technical Information
Connector | Screw Terminals | ||
Number of Gangs | 1 | ||
Number of Poles | Single Pole, 3-Way | ||
Wattage | 600 W | ||
Mounting Type | Box | ||
Sensing Range | 180° 600 sq ft | ||
Voltage | 120 V | ||
Connection Type | Internal Pressure Plates | ||
Sensitivity | Major Motion 35' Minor Motion 20' | ||
Load | Incandescent or LED lamp: 0-600 Watt Fluorescent lamp: 0-600 VA Fan Motor: 1/6 hp | ||
Environmental Conditions | Residential Indoor Use Only |
Resources
Cutsheet
Supporting Document
CAD Drawings
Customer CAD PDF
Installation Instructions
Guide Form Specifications
Sell Sheet
Related Products
Reviews
Rated 4 out of
5
by
Sellers from
Works - requires the same model for multi-way
I found these worked well. I didn't realize at first that the second multi-switch must the same model, not another model or a simple 3/4 way switch. I also found that the switch didn't work well w/o adjusting the time settings. The switch would either conflict or run into a race condition where both switched switched "off" at the same time and it sent both switches into a non-functioning mode - button didn't work at all. Resetting the switch (manually) or via a power-off, and power-on (breaker) appeared to reset the switches, and both would work once, and then go into a hung mode. Adjusting the timing of the switches via the documentation so that they were not using the default times from the factory, caused both switches to work great. I have not tried to connect the white wire to make the light work yet.
Date published: 2020-12-15
Rated 1 out of
5
by
Bill from
This switch does not operate correctly.
This Adorne sensor switch is poorly engineered. This sensor switches activates randomly throughout the day and night. I have replaced the “automatic” sensor switch twice, and they all randomly switch on and off. How can a reputatable manufacturer market a switch that does not even operate correctly?
Date published: 2018-12-09
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can I use the adorne® Motion Sensor Switch Manual On/Auto Off, Magnesium for the Vent alone instead of the light? How about the heater in the bathroom as well?
This device can be used in motor load applications up to 1/6 hp. You'll need to check the electrical requirements of the fan/heater you'd be using.
Date published: 2023-02-28
The regular 4-way switch from Adorne has 02 terminals ("IN") and 02 terminals ("OUT"), while the ASVS12W4 has four terminals ("03-WAY", "HOT", "WHITE", "1-POLE"). How do I use one of the ASVS12W4 to work in a 4-Way installation?
You need one of the ASVS12W4 wired as a Master, HOT, LOAD connected to 1pole, traveler wire to 3way and optional Neutral to White terminal.
Both auxiliary's are wired the same: one traveler to the 3way terminal and power to HOT. 1pole is not connected and Neutral is optional
Date published: 2021-04-28
In a 4-way installation, how do I make a ASVS12W4 work as a 4-way switch considering that the regular 4-way switch ASPD2042G4 has 02 terminals "IN" and 02 terminals "OUT" while the ASVS12W4 has 1 terminal "3-WAY", 1 "WHITE", 1 "HOT" and 1 "1-POLE"?
You need one of the ASVS12W4 wired as a Master, HOT, LOAD connected to 1pole, traveler wire to 3way and optional Neutral to White terminal.
Both auxiliary's are wired the same: one traveler to the 3way terminal and power to HOT. 1pole is not connected and Neutral is optional
Date published: 2021-04-28
Can the sensitivity of the motion sensor be adjusted?
This sensor does not have a sensitivity adjustment available.
Date published: 2020-10-15
Can it be turned off manually?
Yes, if you do not want to wait for the sensor to turn the load off, you can turn it of manually.
Date published: 2022-06-05
For a three way operation, can I have a non motion switch on the other gang or do I need to have both motion switches on each end?
Hello,
Both locations will have to be the ASVS12W4 Vacancy sensors in order for them to work in a 3 way. If You want a motion sensor the model is ASOS32W4, You will need two of the same device in order for them to work in a 3 way.
Hope this helps,
Have a great day.
Date published: 2021-03-25
can this be paired with a half switch in the one-gang plus wall plate? I tried a half switch with a softap and the back of the softap was too large.
The sensor back body is too large for it to fit in the 1 gang+ wallplate with the 1/2 size Paddle switch. You can use the Paddle or Whisper mechanical switches because their body is standard size.
Date published: 2019-02-19
Can the length of time the light is on be adjusted?
Hello,
The time can be adjusted on the ASVS12W4. 5 minute (Min)-30 minute (max).
Hope this helps,
Have a great day.
Date published: 2019-02-11
Bazaarvoice SAP Hybris Integration Version 2.8.1
You may also like...
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
ASOS32M4 | adorne Collection
Motion-sensors conveniently turn the lights on, and off, for you.
$68.61
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
AWP1G2PW4 | adorne Collection
Crisp and clean, this is an update on the quintessential neutral.
$12.25
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
064875 | Pass and Seymour
Turns lights on/off when motion is detected or absent. Part of Smart Lighting with Netatmo.
$68.99
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNAH1W1 | adorne Collection
Creates a robust, dedicated network for the adorne with Netatmo solution.
$164.67
Favorite
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNAL50W1 | adorne Collection
Works with virtually any dimmable bulb for precise light level control from anywhere. Part of the adorne with Netatmo solution.
$123.24