

radiant® 0-10V LED/Fluorescent Dimmer, Tri-Color
RH4FBL3PTCCCV6
radiant Collection
radiant® 0-10V LED/Fluorescent Dimmer is rated
out of
5 by
2.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$93.04 USD
Upgrade your space with precise dimming control and exceptional style. The radiant® 0-10V Dimmer works with low-voltage fluorescent and LED fixtures, allowing you to set the perfect light level for your space with efficiency and ease. Part of the radiant® Collection, it also features clean lines and smooth control for a sophisticated touch. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.
Quantity
In Stock
Added to Your Shopping Cart
- Send
- Save as PDF
-
FavoriteAdded to Favorites Go to favoritesRemove from favorites?
Features
- Replaces any basic switch or dimmer with ease, in both single-pole and 3-way applications. For use with 0-10V, 4-wire, 120V 10A/277V 5A LED and fluorescent lighting.
- Low-profile paddle switch offers smoother On/Off control, while a separate, ergonomic slider allows you to adjust light levels with precision.
- Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
- Constant memory features returns lights to their previous level after a power failure or outage.
- No derating* required for 2-gang applications. *Reducing the maximum wattage a dimmer can handle. This is sometimes required for multi-gang applications.
- Features durable, high-impact resistant thermoplastic construction.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
Specifications
General Info
Product Line | Pass & Seymour | ||
Color | White, Ivory, Light Almond | ||
UPC Number | 785007055979 | ||
Country Of Origin | China | ||
Number of Switches | 1 | ||
Warranty Type | Limited Lifetime Warranty |
Technical Information
Number of Gangs | 1 | ||
Number of Poles | Single Pole, 3-Way | ||
Mounting Type | Box | ||
Voltage | 0 V, 10 V |
Resources
Cutsheet
Supporting Document
Premium Content
Brochure
Related Products
Reviews
Rated 5 out of
5
by
OldEngineer from
This is a great dimmer at a good price
I just purchased and installed this 0-10v dimmer for a light my wife wanted that was only dimmable via 0-10v dimming.
The best feature of this dimmer is that the "Constant memory returns lights to previous level after a power failure". It is very easy to connect and comes with covers for two additional covers in addition to the white. I bought it at a local electrical supply house and it was very cost effective compared to buying one online. I hope it is reliable, it will get a lot of use.
Curiously Legrand products did not show up in internet searches for 0-10v dimmers.
Date published: 2019-02-07
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Purchased 2 RH4FBL3PTC Separate circuit currently connected red (non3way) to load lights. Lights are standard dimmable led bulbs (26base) What color do I connect for dimming. No ballast. Please respond soon . Thanks
The RH4FBL3PTC is designed for use only with 0-10V dimming ballasts. The low voltage wires from the dimmer would connect to the low voltage wires on the ballast. For standard dimmable LED bulbs you could use the RHCL453PTC or RH703PTUTC dimmers.
Radiant products
1.844.957-3783
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2022-06-23
Not an electrician. I believe I have two of these switches in my kitchen connected to 7 ceiling lights and I'm getting some flicker through out the dimming range. Any thoughts?
I would verify the model number of the dimmers by removing the wallplate. If it is the RH4FBL3P, it has a calibration wheel on the left side to adjust for flickering(see attached image). Also, you mention two dimmers controlling 7 ceiling lights so make sure that you are NOT using two dimmers in a 3way. It can only be one dimmer and a 3way switch.
Radiant products
1.844.957-3783
Mon - Fri: 8am - 6pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2022-05-16
I've read mixed reviews about compatibility between dimmers and certain LED drivers. I have two Halo 8" LCR fixtures (Model # LCR8509FSE010MW) and would like to match the existing Legrand switches I have. Is this dimmer compatible with this fixture?
It should work. The dimmer is a 0-10V dimmer and the lights are 0-10V dimming as well.
Date published: 2022-01-08
Will this work with Halo RLDM 4” (#IB518292ML) integrated LED recessed lights?
No, the correct model number is the RH703PTUTC universal dimmer for that type of recessed LED lights..
Date published: 2021-10-18
Is there any PWM going on inside of this dimmer? I have a Meanwell 24V power supply that does not work with your product. This power supply can accept standard 0-10V signals as well as 10V PWM signals, dimming based on duty cycle.
No, it does not have PWM on the 0 - 10 volt signal for the RH4FBL3PW dimmer.
Date published: 2021-05-03
Hello - What is the maxiumum LED wattage that the 0-10v dimmer can control I have 43 x 36W LED 0-10v dimmable linear fittings I want to contyrol them all at once What do I need?
For a 0-10V dimmed fixture, the total number of fixtures per dimmer is based on the current sinking capacity of the dimmer and the current sourcing value from the drivers. i.e. a driver sourcing 100ua and an RH4 dimmer capable of sinking 30mA would give the capability to run approx 300 drivers, not dependent on the individual wattage of the driver.
Date published: 2021-05-25
In a commercial application, would the electronics within the switch be damaged if the lighting branch circuit is routed through a contactor for automatic shut off controls? This has been an issue with power packs in a similar set up.
Hello, thank you for the question. This device can be safely used with a switch contactor. I hope this helps.
Date published: 2021-04-13
Can multiple dimmers be used to dim the same group of lights as in a 3-way or 4-way setup? If not, are there companion dimmers to allow for this application or is this not possible with this product? Thanks.
The RH4FBL3P dimmer would need to be used with a standard 3way switch and you can only dim from the one location.
Typically, you would need a master dimmer and remote dimmer for that type of application and we do not have them for 0-10V drivers.
Date published: 2021-05-05
You may also like...
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
LC2101-WH |
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
LC2103-WH |
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
LC2303-WH |
Favorite
Added to Favorites
Go to favorites
Remove from favorites?
RH703PTUTCCCV4 | radiant Collection
$70.90