Three Gang Recessed TV Box with Low-Voltage Pull-Through Brushes

The TV3LVKITWCC2 supports surface-mount installation and, like traditional wall plates, does not sit perfectly flush/recess into the wall.

Thank you for your inquiry. Yes, the outer openings can be used for line voltage applications. Please review the following instructions: A P&S old work electrical box must be used. P116W, S116W, M118W & S118W are recommended for best fit. Check for clearances before installation to ensure proper fit. Center opening on TV3W may not be suitable for line voltage in all applications. (2x4 wall construction)

Thank you for your inquiry. Please review the following frame mounting instructions: Note: Unit to be installed on finished wall, with a thickness of 1/8" to 1-1/16". Be sure there are no obstructions behind wall surface, such as wall studs. If you have any other questions or comments, please get in touch with us at (800) 223-4185 8:00 a.m. – 6:00 p.m. EST or by email at Tech.Support@legrand.us.

Thank you for your inquiry. The TV3LVKITWCC2 is plastic, but if you are looking for a metal option, please review the following part number: Part #: TV3WMTTVSSW - 3-gang Metal Recessed TV Box If you have any other questions or comments, please get in touch with us at (800) 223-4185 8:00 a.m. – 6:00 p.m. EST or by email at Tech.Support@legrand.us.

They are wrong… the dimensions this previous answer gives you are the overall dimensions NOT the cutout dimensions, none of the literature provided gives you the correct information, you HAVE to have the product in your hands in order to install it correctly.

The device is designed for standard wall thickness. For installation assistance, please give us a call in Technical Support so we can walk you through it. You can reach us at 844-957-3783

We do not have a set number of cables that will fit. You can pull as many as you need as long as they are not kinked or damaged in any way.

If you have enough depth in your wall for the electrical box to be secured to the TV box frame, the line voltage receptacle can be installed in the center opening as well as the end cavities. Most wall are not deep enough to use the center position for the line voltage installation.