text.skipToContent text.skipToNavigation

radiant® Spec-Grade 20A Self-Test GFCI Receptacle

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 1501ms
  • bvseo-msg: Execution timed out, exceeded 1,500ms;

GFCI receptacles from the radiant® Collection self-test automatically every three seconds to ensure reliable protection from shock due to ground fault occurrences. Meeting National Electrical Code requirements for ground fault protection, GFCI receptacles make it easier to recognize and fix trips right where they happen – no more confusion at the breaker box. 20A outlets are ideal for use with larger appliances, as well as to meet regional requirements (Chicago, Canada). GFCI protection is required by code in bathrooms, kitchens, garages, basements, outdoor areas, and for any other outlets found within six feet of a sink or water source. GFCI outlets should always be used when replacing existing GFCI outlets during renovation. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately. Spec-Grade devices are engineered to meet federal specifications for use in commercial installations.


  • Part of the radiant: collection
  • Conducts an automatic test every three seconds, ensuring it's always ready to protect. If the device fails the test, the trip indicator light (red LED) flashes to signal that the GFCI should be replaced
  • Thinner than competitors' GFCI Receptacles: leaves more room for wires in the box
  • Feed-thru wiring configuration allows GFCI to protect downstream receptacles
  • Prevents line-load reversal miswire: no power to the face or downstream receptacles if wired incorrectly
  • Side or internal screw-pressure-plate back wire with #10-#14 AWG solid or stranded copper wire and two back wire holes per terminal
  • Mounting screws are shipped captive in the device and wall plate for easier installation
  • Dual-direction test and reset button colors match the device face
  • Supplied with matching TP wall plate
  • 10kA short circuit rating
  • 20 Amp feed-thru capacity


General Info
Color Ivory
UPC Number 785007035964
Country Of Origin China
Product Line Pass & Seymour
Application Sector Residential/Commercial
Number of Receptacles 2
Warranty Type 1-Year Limited Warranty
Standard cULus, UL Listed, FSUL
Additional Information
Product Environmental Profile Yes
Listing Agencies / 3rd Party Agencies
cULus Listed  Yes
Technical Information
Number of Gangs 1
Voltage 125 V
Mounting Type Box
Trip Range 4 to 6 mA
Connection Back and Side Wire
Frequency Rating 60 Hz
Interrupt Rating 4 A
Environmental Conditions 95% Humidity, UL 94 V2


  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 1500ms
  • bvseo-msg: Execution timed out, exceeded 1,500ms;

Questions & Answers

Why doesn't it come in the purple/plum color? Want to be consistent.

Asked by: Taktiks
Our Radiant line does not offer a purple/plum finish in any of their products.
Answered by: Legrand Technical Support
Date published: 2021-11-29

I have purchased multiple outlets in the Nickel color. In looking at the 20 amp GFCI, is the Grey noted in color choices the same as Nickel?

Asked by: Merk
No, GRAY and NICKEL are not the same color finishes. if you want the 20A GFCI in NICKEL, the model number is 2097TRNICC4: https://www.legrand.us/radiant/products/outlets/2097trnicc4.aspx
Answered by: Legrand Technical Support
Date published: 2020-11-09

Is the brown color the same as dark bronze?

Asked by: Jjcenteno
While pretty similar in color, the Dark Bronze is more of a darker "metallic" finish while the brown is more flat. Hope this helps!
Answered by: Tech Support
Date published: 2020-09-08

Your product brochure says 'Buy America Act Compliance.' How can a product with country of origin China be BAA compliant? How do you verify that statement? I need to know for product approval.

Asked by: Inspector
We have certain models of our GFCI's that are 'Buy America Act Compliance' and are not manufactured in China. These models will have an "NA" in the part number for North America. EX: https://www.legrand.us/radiant/products/outlets/2097nai.aspx
Answered by: Legrand Technical Support
Date published: 2019-04-29

Is this unit good for surge protection for modern washing machines

Asked by: Matt
Yes it is, if the washing machine is rated for a 20A circuit.
Answered by: Legrand Technical Support
Date published: 2020-04-26
  • y_2021, m_12, d_3, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_2097I, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 140ms