text.skipToContent text.skipToNavigation

LS TradeMaster Single-Pole/3-Way Preset Dimmer w/ Single-Pole/3-Way, 3-Speed De-Hummer Fan Control, White

LSCLDC163PW Pass & Seymour
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 122ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

The industry's first CFL/LED dimmer with fan speed control works with select dimmable CFL/LED or incandescent lighting loads and features a sleek, sculpted ergonomic design for smooth, easy operation and precise control.
Color White


  • CFL/LED dimmable bulb compatible (except for 0-10V LED drivers).
  • Single pole/3-way versions.
  • Unique integrated single pole/3-way dimmer with fan speed control.
  • Ratings: 150W LED & CFL: 300W Incandescent: 1.6A (Fan Control): 120VAC 60Hz.


General Info
Color White
UPC Number 785007040517
Countries Of Origin China
Product Line Pass & Seymour
Application Sector Residential
Standard RoHS
Listing Agencies / 3rd Party Agencies
cULus Listed  Yes
Technical Information
Wattage 450 W
Number of Poles 3-Way
Voltage 120 V
Connection Back & Side Wired
Contact Rating 120VAC
Speed Range 3-Speed
Environmental Conditions Indoor Only
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 45ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Is this or can it be illuminated/lighted or have an led locator? Thank, Jay

Asked by: Jaywish
You can add the Snap-in Light Module to illuminate when it is OFF: TM8LMCC8 https://www.legrand.us/search.aspx?q=TM8LMCC8
Answered by: Legrand Technical Support
Date published: 2020-09-18

I have installed LSCLDC163PWCCV4 switches so we can use led lights. For some reason the led lights are flickering like crazy. They are GE basic leds, GE Reveal leds, and Walmart leds, all 5 or 5.5 actual watts. Everything flickers. Can you help?

Asked by: joi2
I would suggest contacting Technical Support so they can assist in troubleshooting the cause for the flickering. Pass & Seymour products 1.800.223-4185 opt 1 Mon - Fri: 8am - 8pm EST (excluding holidays) Email Us - tech.support@legrand.us
Answered by: Legrand Technical Support
Date published: 2020-03-31

Can the motor Load of this switch accept Exhaust fans? I would like one for bathroom lights and the other for the exhaust fan.

Asked by: popper9382
Yes, as long as the fan does not exceed 1.6A rating.
Answered by: Legrand Technical Support
Date published: 2020-01-14

I installed a fan with a light on patio. I have a 3-way switch, one in the kitchen and one in master bedroom that control the fan. I need a dual fan/light 3-way. Do they exist? Will this work?

Asked by: NotAnElectricial
The dual controller(LSCLDC163PW) can be used on one side of your 3way and a standard 3way switch(s) on the other end(RCD33W for example).
Answered by: Legrand Technical Support
Date published: 2019-10-30

Can this control be used to control fan speed and dim lights using only 12-2 wire

Asked by: 1955chevy
Thank you for your question regarding the LS Series Single-Pole/3-WAY Preset Dimmer W/ Single-Pole/3-WAY Preset De-Hummer Fan Control, WHITE(Model # LSCLDC163PW). You need at least 12-3 wire to control both the light and fan separately. You can power both from one HOT lead, but you need separate LOAD wires for the light and fan to work properly.
Answered by: Legrand Technical Support
Date published: 2018-10-15

Can the fan and light sides be split/wired differently (single pole fan with 3-way light)? I'd like to have a second light switch near an exterior door (with an existing 3-way switch), but a single location to control the fan (at this unit) would be fine.

Asked by: Eric
Thank you for your question regarding Pass & Seymour Dual Fan and Dimmer control(Model # LSCLDC163PW). Yes, you have both options for the dimmer and fan control. They can be used either was, Single Pole or 3way for each one. You can have both single pole, both 3way, or one SP and the other 3way.
Answered by: Legrand Technical Support
Date published: 2018-08-09

I am looking for a switch like this that can handle two lights with dimming. One with LED and one with Incandescent. The LED dimmer side would work fine but could the FAN side even with only three resets work for incandescent (2-75 watt lights)?

Asked by: MSC123
We do not offer any dual dimmers for lighting. This model is designed specifically for a motor load on one side and the other side is for a lighting load.
Answered by: Legrand Technical Support
Date published: 2018-04-27

Does this come in the Radaint Nickel finish? Everything else in my home is in that finish.... why wouldn’t one like this be available for my fan/light combos.... I have both bedrooms, kitchen & 2 on lanai.... glaring white as only choice is just UGLY

Asked by: Libby
The LSCLDC163PW is not part of the Radiant line so it is not available in Nickel. The available color options are Black, Brown, Ivory, Light Almond and White.
Answered by: Legrand Technical Support
Date published: 2020-03-27
  • y_2020, m_11, d_27, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_LSCLDC163PW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 78ms