text.skipToContent text.skipToNavigation

Construction Spec Grade Receptacles, Back & Side Wire, 20A, 125V, Ivory

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 95ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Construction Spec Grade Duplex Receptacle Back & Side Wire 20amp 125volt Gray


  • Corrosion-resistant, plated steel strap locked in to face and back body to resist pulling away from face/body assembly.
  • .032 inch thick, brass, triple-wipe power contacts for lasting retention.
  • Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
  • Impact-resistant nylon face and thermoplastic back body.
  • 8 hole internal screw-pressure-plate back wire terminals accept #10 - #14 AWG solid or stranded copper or copper-clad conductors.
  • Terminal compartments isolated from each other for positive conductor containment.
  • Tri-drive terminal and mounting screws.
  • Auto-ground clip assures positive ground.
  • For covering patents, see www.legrand.us/patents.
  • For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.


General Info
Color Ivory
UPC Number 785007210224
Country Of Origin Mexico
Product Line Pass & Seymour
Application Sector Residential/Commercial
Standard UL 498
Listing Agencies / 3rd Party Agencies
cULus Listed  Yes
cULus ListingNumber  140596
Technical Information
Number of Poles Double Pole
Voltage 125 V
Connection Wire Ground
Wire Size 4 AWG
Number of Wires 3


  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 42ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Questions & Answers

Do have to wrap the wire around screws and tighten or can you put the wire in the terminal hole and then tighten screw?

Asked by: Eric
The CRB5362W is both "back and side wire", so you can terminate your wires either way.
Answered by: Legrand Technical Support
Date published: 2021-09-14

"Internal screw-pressure-plate back wire terminals" -- Does this mean smash-plates or just stab-in holes? I need something that can be easily used with stranded wire.

Asked by: OPEL
The CRB5362W has the internal pressure that applies pressure to the wire when the terminal screw is tightened down. It does not have stab in hole option.
Answered by: Legrand Technical Support
Date published: 2021-07-13

Why do your spec sheets for a 5362 receptacle show they are NEMA WD1 & WD6 compliant, but the cutsheets for the 5362A & CRB5362 don't? Do these not comply or are they just not on the cutsheet? If they do comply can I get something in writing that shows

Asked by: Anonymous
Both of these receptacles comply with Nema WD1 & WD6 as stated at the bottom of each of the attached catalog pages.
Answered by: Legrand Technical Support
Date published: 2021-05-04
  • y_2021, m_12, d_1, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_CRB5362I, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 86ms