DLM Wired Standard Switch, 1B 1R, Brown

The requested behavior is not supported on the LMSW-211-W. The LMSW-211 is designed so that the dimming rocker operates with tap for preset actions and press-and-hold for continuous dimming. By default: 🔹Up button (tap): Turns lights to full brightness or recalls the last light level if the load is off. 🔹Down button (tap): Turns the lights off with a fade. 🔹Press and hold Up/Down: Raises or lowers the light level. The switch cannot be programmed so that each tap of the Up or Down button increases or decreases the light level in small incremental steps like a residential dimmer. If stepped light levels are desired, consider an LMSW-241 Scene Switch, which can recall programmable preset light levels through its scene buttons.

The device supports the use of either standard AA alkaline batteries or AA lithium batteries. Both battery types are compatible with the EN‑SCPPH‑0450‑ZB as well as other Wattstopper wireless devices, so customers may choose either option based on availability or performance preference.

You will find a total of 40 per case.

Hello. The EFB6 and EFB8 accept standard single gang device plates (2 3/4" x 4 1/2"). For the EFB10, the EFB10-6AB and (3) CM2-U2KEYA-WH adapters can be used for up to 6 keystones. The EFB6810BTBK is just the floor box cover. Thank you

Hello, Wiremold products, including aluminum Plugmold can be purchased through electrical distribution. Please click the link below to locate a distributor near you. https://www.legrand.us/where-to-buy/shop-local/?ps-sku=1036&utm_medium=distributor&utm_campaign=wtb&utm_term=wiremold

Hello, The FS-205 occupancy sensors turn lighting ON and OFF based on occupancy and ambient light levels. It does not have continues dimming

Hello, Size: should work, Issue with 2 switches next to each other - no, it is okay to do this

Engraving is restricted to the single line 10-character limit explained on the engraving form.