25DTP Series 12' Tele-Power Poles handle all of your needs effortlessly, whether it's power, data, or A/V wiring you need to bring down to the desk, workstation, or cash registers. The vertical drop poles give you the flexibility and capacity to devote both sides of the pole for single service or separate the two channels to provide dual service feeds. This pole comes with two(2) prewired Fed-Spec general grade duplex receptacles, 20A 125V. Knockouts provided in removable cover for RJ11/RJ45 and modular furniture communication connectors. All mounting hardware, entrance end plate, and two ceiling trim plates are included.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Bring power, data, and A/V services into open space environments quickly & easily. Easy to install. Reduces costs for moves, adds and changes.
- Relocatable. Ready for service in 30 minutes or less. Can be quickly reconfigured or relocated as work space uses and service needs change.
- Dual-channel. Allows a single drop point for access to multiple services.
- Wide selection of standard options. Stocked in a variety of materials, finishes, heights, and device configurations. Provides what you want, when you need it.
- Multiple color options. Available in four aesthetic colors: white, black, ivory, and gray.
- Datacom connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless,aesthetically pleasing interface for voice, data, audio, and video applications at the point of use.
- Pole extenders combine quick installation with easy job-site handling. Snap together 5' sections to create a pole or extend the length of your existing 25TP series pole. These new extenders accommodate a variety of ceiling heights, can ship UPS or air freight for quick & reliable delivery.
- Custom capabilities. Modify receptacle type and location, change color finish, alter pole heights, add fixture whips and more. Affording you more choice in appearance and configuration.
Specifications
General Info
| Product Line | Wiremold | ||
| UPC Number | 786776193022 | ||
| Country Of Origin | United States |
Dimensions
| Product Width US | 2.83 in | ||
| Product Height US | 149.86 in |
Additional Information
| RoHS Conformant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Listing Agencies / 3rd Party Agencies
| cULus ListingNumber | E15191 | ||
| cULus Listed | Yes |
Buy American Act Compliance
| NAFTA | Yes |
Resources
Brochure
Installation Instructions
BIM Models
Cutsheet
CAD Drawings
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I need a 12' Power pole, with data and power in ivory i need 2 of them Could i use the 25DTP-412 and add something to make it work??
Hi,
The 25DTP-412 will have 2 duplexes in it and it will also have a communications plate that will have knockouts to accept up to 6 standard keystone style jacks.
Thanks,
Date published: 2023-11-09
Can you bring in multiple 120V circuits
Hi,
That pole comes prewired for a single circuit. You can add one more duplex with a separate circuit for that by using a 25DTP-B-DG.
Thanks,
Date published: 2023-10-13
How is the base of the 25DTP-415BK fastened to the horizontal surface (such as a table top or counter top) on which it rests so as to avoid shifting?
Hello,
To properly secure the base to the surface, (2) #10 pan head screws should be fastened directly through the base.
Thank you,
Date published: 2023-04-11
I am looking for a mounting kit for a 25DTP-4WH. I have two poles but need three mounting kits. is it sold seperately?
Hi Kim,
The part # for the mounting kit is 25AM-AP. It can be purchased through a distributor.
Date published: 2023-03-02
Can these poles be used to hook up a power furniture feed? Run the wires down the pole and splice them to a whip with a blank cover plate supplied by others?
Hello,
The blank 25DTC-4 series poles can be used for furniture feed applications by field punching KOs on the pole cover for power and low voltage. Please call Wiremold Technical Support at 844-957-3783 option 2 for Wiremold and option 2 for Technical Support for additional information.
Thank you
Date published: 2023-02-03
Can a standard Keystome style Cat 6 jack be snapped into the ports on the pole or do you have to use a wiremold proprietary insert first?
Hi Kyle,
The 25DTP series pole provides a 6-port keystone plate at the bottom of the back side of the pole. The smaller knockouts are for standard keystone jacks with no additional adapters needed. The larger rectangular knockout is sized for a modular furniture bezel supplied by the manufacturer of the jacks.
Date published: 2022-08-17
WHAT IS PART NUMBER FOR TOP CAP.
Hello,
The 25DTP series power poles come with an accessory pack that includes ceiling trim plates, a clamp assembly, and an entrance plate for the top. The part number for the pack is 25AM-AP.
Thanks,
Date published: 2022-08-02
I have a customer that purchased a 25DTP-4-12 and they are looking for a floor mounting plate. i looked at the spec sheets and didn't see anything.
Hello Sean,
A foot or boot is included with each pole. However, if the boot is missing it's available separately as catalog number E25050.
Feel free to direct any additional questions to us direct at 1-844-957-3783. From the main menu select option 2 for Wiremold followed by option 2 for Technical support.
Thank you
Date published: 2022-02-16
Bazaarvoice SAP Hybris Integration Version 2.8.1