adorne® Motion Sensor Switch Auto On/Off
ASOS32G4 adorne Collection
Motion Sensor Switch Auto On / Off, Graphite is rated out of 5 by 8.
Bazaarvoice SAP Hybris Integration Version 2.8.1
Perfect for pantries, garages, and anywhere you might want lights to turn on automatically when you enter a room, and turn off again when you leave. The Auto-On/Auto-Off SensaSwitch provides convenient lighting control by responding to your presence through motion-sensing technology. Use the device on its own to control a light or fixture from a single location, or pair with additional switches or dimmers to control a single light source from multiple locations in 3 or 4-way applications. Made exclusively for use with screwless Wall Plates from the adorne® Collection, sold separately.
Added to Your Shopping Cart
WHERE TO BUY
- Installs in 15 minutes or less, fitting into an existing electrical box. No new wiring required for typical installation.
- Features motion-sensing technology for automatic on/off lighting control.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a stunning, screwless adorne® Wall Plate, not included. Available in a range of contemporary colors and finishes. Coordinate with other designer switches & outlets.
|Country Of Origin||China|
|Product Line||Pass & Seymour|
|Number of Switches||1|
|Warranty Type||Limited Lifetime Warranty|
|Product Width US||1.77 in|
|Product Length US||2.66 in|
|Product Depth US||1.85 in|
|Number of Poles||Single Pole, 4-Way|
|Number of Gangs||1|
|Connection Type||Internal Pressure Plates|
Guide Form Specifications
Customer CAD PDF
Rated 1 out of 5 by Jake from Does not do what its supposed to do i recently bought this item, it is installed and turns off and on using the manual function but the motion sensor does not work. the wiring is right and it has been let with sufficient time unbothered yet it does not turm the lights on.
Date published: 2019-12-28
Rated 1 out of 5 by Bill from This switch works irratically. When you enter the this switch turns on. Also it turns on multiple times when no one enters the room. I have replaced this switch twice in my house, and it still acts irratically. Whoever engineered this switch needs help.
Date published: 2018-12-09
Rated 5 out of 5 by ezraw123 from Great buy Works as described. Simple to install. Looks great!
Date published: 2020-09-11
Rated 5 out of 5 by JackieG from Love this motion sensor I have put three of these in the bathrooms. I love them and have had no issues with functionality at all! Love the look. I will also put in laundry room.
Date published: 2020-09-02
Rated 1 out of 5 by NicoleS from Sensor Switch Only switched to Adorne sensor for upgraded look with current sensor ( that was working fine). Could not get Adorne to work past test mode. Had to purchase another ‘on / off ‘ Adorne switch ( without sensor) to finish which worked fine. Went to website to trouble shoot and section of website was down dealing with the Adorne switch troubleshooting.
Date published: 2019-02-17
Bazaarvoice SAP Hybris Integration Version 2.8.1
Can i turn this off manually if i wanted to?
Yes, this sensor can be turned off manually.
Date published: 2021-05-05
After testing the switch by putting the trimpot to minimum, the switch now reverts to a shutoff delay of 5 mins even though I have the trimpot moved to the lowest setting before entering test mode again. How do I get lowest delay set?
same here , I did try the test mode with the 5 seconds delay , after it got out of the test mode , still takes about 5 minutes to shut off :(
Date published: 2020-12-04
I Want to know if I do install this in a garage, and let's say I'm working in the garage and switch is not in a view of motion obviously it will trigger "Off" sequence since it does not detect any motion, but my question is can it be manually switched on?
If you want to cover a larger area to keep the light turned on, install two of them, one in each area, wired in parallel. Either one will turn on the light.
Date published: 2020-07-22
Does this switch need a ground and a neutral? I have no ground and no neutral in my 1929 home. I only have a hot (load) and a return to the main breaker. I want to install this inline by breaking the the hot or return. Can this be done using this switch?
This switch works poorly. I recommend you do not buy it.
Date published: 2020-04-24
Will this work with a bathroom exhaust fan? If not, which sensor should I use for that.
Yes, as long as your bath fan does not exceed the 1/6HP rating for the sensor.
Date published: 2019-06-24
Does it work with LED/CFL 450W?
It is designed to handle Incandescent or CFL/LED lamp: 0-600 Watt's.
Date published: 2020-06-14
Is it compatible with 0-10V LED drivers?
It is not compatible with 0-10V drivers.
Date published: 2019-02-13
I have this in the entrance to my bathroom and it works fine when I enter. However it always turns off before I am done and I have to leave in the dark. Is there a way to adjust how long the light stays on before it turns off?
I heard from Legrand support team and learned I can adjust the delay time using the trimpot. The range is 30 seconds up to 30 minutes. You can also set the switch so it does not turn on in daylight. These functions are explained in the installation instructions.
Date published: 2020-05-05
You may also like...
AAAL1G4 | Legrand
The Accent Nightlight is a stunning addition to any adorne product. It provides a wash of light below the wall plate, acting as a nightlight or as an accent light.
AWP1G2GR6 | Legrand
Dark, sleek and a bit dramatic, this wall plate brings a sophisticated edge to any space.
ADSM703HM2 | Legrand
Motion-sensing technology with optional Manual-ON/Auto-OFF. Perfect for use in garages and pantries.
ASTM2M2 | Legrand
The adorne� Manual-ON/Timed-OFF Motion Sensor Switch allows you to turn lights on when you enter a room and automatically turns them off at a preset time when you leave. Perfect for bathrooms.