text.skipToContent text.skipToNavigation
  1. Home
  2. Audio/Visual
  3. Racks and Enclosures
  4. In-Wall Storage
Cover for the 9" Dual-Purpose In-Wall Enclosure
9" Dual-Purpose In-Wall Enclosure with Wireless Devices Installed
Image of an On-Q 9-inch Dual-Purpose In-Wall Enclosure with 5-inch Mounting Plate with product description sheet behind the enclosure.
Image of an electrical outlet that is pointing to the 9-inch Dual-Purpose In-Wall Enclosure outlet knockout feature. The text in black reads " WORKS WITH METAL OLD WORK STANDARD SWITCH/OUTLET BOX".
Image showing the installation of an On-Q 9-inch Dual-Purpose In-Wall Enclosure. The image is broken down into 4 different photos that show different installation methods. The text in black reads " New Construction OR Retrofit Installation".
Four grid image showing the the built in cable management and device loops feature. The first image shows a screw driver pointing towards the loops. The second image shows a hook and loop fastener. The third image shows a hook and loop fastener being thre
Image showing an installed 9-inch Dual-Purpose In-Wall Enclosure. The enclosure is connected to a TV mounting bracket. The text in black reads " STORE DEVICES IN_WALL FOR A FLUSH, SLEEK INSTALL".
Image showing the installation of an On-Q 9-Inch Dual-Purpose In-Wall Enclosure. The enclosure is fitted with electronic modules and surrounded by a TV mounting bracket. There is a transparent image of a TV superimposed on top of the enclosure and mountin
Image showing an installed 9-inch Dual-Purpose In-Wall Enclosure. The enclosure is connected to a TV mounting bracket. The text in black reads " WORKS WITH ANY TV MOUNT INCLUDING SANUS PREMIUM MOUNTS".
Image showing the various features of the On-Q 9-inch Dual-Purpose In-Wall Enclosure. the features shown include: Outlet Knockouts (top & bottom), Cable Knockouts, and Retrofit Drywall Clips. The image also shows the outlets this enclosure supports.
9" Dual-Purpose In-Wall Enclosure with Elevated Mounting Plate
Image of a disassembled On-Q 9-inch Dual-Purpose In-Wall Enclosure with 5-inch Mounting Plate. The text lists what is included with the enclosure.

9-inch Dual-Purpose In-Wall Enclosure with 5-inch Mounting Plate

ENP0905NAV1 On-Q
9-inch Dual-Purpose In-Wall Enclosure with 5-inch Mounting Plate is rated 5.0 out of 5 by 2.
  • y_2025, m_5, d_17, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_ENP0905NAV1, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 70ms
  • REVIEWS, PRODUCT

$56.09 USD

The 9-inch Dual-Purpose In-Wall Enclosure is engineered to provide storage of structured wiring and AV components. The ENP0905NAV1 is constructed of Wi-Fi transparent material to manage wireless components and AV devices at point-of-use locations, like directly behind a TV or other media centers. It can also be used for structured wiring purposes, such as networking equipment, access points, switches and more.  The ENP0905NAV1 is compatible with devices like Apple TV, Roku, Amazon Fire TV, network switches, 3rd party structured wiring components and more. Includes a 5-inch elevated mounting plate, cover, trim ring and drywall clips, allowing for both new construction and retrofit installations.

  • Free shipping on orders over $49 & free returns

Quantity

In Stock

Add To Cart Button Ready

Where To Buy
  • Send
  • Save as PDF
  • Add to favorites Remove from favorites
Features

Features

  • Replacement trim ring and cover
  • Can be placed behind most TV wall-mounts including SANUS premium TV mounts
  • Compatible with devices like Apple TV, Roku, Amazon Fire TV, network switches, 3rd party structured wiring components and more
  • Comes with removable mounting plate that features 1.5-in of elevation to accommodate larger devices and frees up space in the enclosure
  • Tool-free cover is low profile and designed to snap into place providing a ''flush'' appearance to wall surface
  • Knockout configurations support conduit and in-wall wired connections, while a cable pass through on cover allows for outside cable connections
  • Features (2) AC knockouts to accommodate a single gang junction box to power devices in enclosure
  • Universal mounting grid maximizes compatibility with 3rd party devices without additional mounting brackets
  • Features drywall clips to allow both retrofit and new construction installations
  • UL Listed and constructed of Wi-Fi transparent ABS plastic to ensure uninterrupted performance of wireless devices
  • Proudly made in the USA
  WARNING: WARNING: This product can expose you to Tetrabromobisphenol A, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. www.P65Warnings.ca.gov
Specifications

Specifications

General Info
Color White
Type Enclosure
Application Sector Commercial, Residential
Product Line On-Q
Country Of Origin United States
Standard RoHS, UL, cULus
UPC Number 804428434139
Dimensions
Product Depth US 3.88 in
Product Height US 9.33 in
Product Width US 14.37 in
Listing Agencies / 3rd Party Agencies
cULus Listed  Yes
Additional Information
RoHS Compliant Yes This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863.
Technical Information
Seismic Tested No
Compatibility Paintable with Rust-Oleum paint for plastic or equivalent
Enclosure Type Dual Purpose
Environmental Conditions 0 to 93% (relative humidity, non-condensing)
Frame Injection-molded plastic
Mounting Consult the Factory for Mounting Recommendations
Thickness 0.1 in
Resources
Related Products
Reviews

Reviews

Rated 5 out of 5 by from A fantastic option I’m not actually using this product the way it’s intended. I run an IT department for a small company and was looking for a way to hide some Ethernet connections in the wall. This is perfect for my situation. I had to think outside the box for a way to hide multiple connections in various locations of our main office and this fits perfectly. I purchased the 9” wall kit with the 5” bracket mount included. I then mounted my 6 position Ethernet keystone plate to the bracket along with a mini 5 port switch that works by being powered over the Ethernet cable since I decided not to install power inside the enclosure. Works like a charm. I have a few cables coming in the enclosure and everything is hidden inside the wall. This also keeps the mini switch and Ethernet connections from being run into and damaged by regular cleaning activities or if the office is rearranged for any reason. It’s a bit in orthodox way of doing things but for this type of setup it is perfect.
Date published: 2023-10-04
  • y_2025, m_5, d_17, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_ENP0905NAV1, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 24ms
  • REVIEWS, PRODUCT
Questions & Answers

Questions & Answers

The cover plate does not seem to fit properly. When attached to the enclosure, inside the trim ring, the cover plate bows outward in the center. What's the problem here?

Asked by: Tony
It does not seem designed to pop in, you have to put one end in the slots and then flex the cover to get the other end locked. I have two of them and they work the same way. However, if your wall box has become misaligned or out of square, it could prevent the top from going in. Just be careful not to break off the retaining pins. Don
Answered by: DonW
Date published: 2025-05-13

The description states that the box is compatible with metal old work electrical boxes. Does the electrical box need to be metal or can it be PVC?

Asked by: Jim
It needs to be metal to align with the opening and mount hole pattern. The box, further, has no capacity to support wire clamps on it's own so the NEC required wire clamps would need to be either an integral feature of the box (like metal old work boxes include) or an additional fitting added to the PVC box. You might be able to modify the box by drilling through it to secure the PVC J-box to the Legrand one, but that wouldn't be an officially supported configuration.
Answered by: Jonathan F.
Date published: 2025-03-09

I would like to use both provided cut-outs, top and bottom, for line voltage outlets. When the box is installed is there enough clearance to run line voltage wire from the top old work box to and old work box on the bottom?

Asked by: Torque
Yes, box is a little tapered, so can be done. I installed both top and bottom electrical outlets. Just have to be careful installing the mounting screws to ensure romex does not get damaged.
Answered by: Kemyst
Date published: 2025-02-02

Is there any way to get just the cover plate, we have these installed to hide our airmedia's in study spaces and a few now have damaged clips. Cuz, students.

Asked by: CMORO
We're sorry, we do not have those available as replacement parts.
Answered by: Wiremold Tech Support
Date published: 2024-03-28

will a 43" Samsung Frame TV one connect box fit inside

Asked by: Daniel
Yes it will. These enclosures were designed with Samsung's OneConnect boxes in-mind.
Answered by: Wiremold Tech Support
Date published: 2023-08-28

Can this be mounted on a ceiling to hide cables and streaming boxes for a projector?

Asked by: Bryan
It can physically be done. Keep in mind that this enclosure has holes in the back to allow for mounting things. This may allow for insulation to fall through if this unit is in a ceiling facing a blown-in insulated space.
Answered by: Wiremold Tech Support
Date published: 2024-03-28

Hi, can this be mounted vertically in a retrofit application?

Asked by: biglou
Jeffrey is incorrect. In the included instructions it shows that it can be mounted vertically to the adjacent stud by simply drilling through the side of the enclosure. The only downside to this method is that you are only mounted on one stud and the box has a little more wiggle to it (assuming a normal 16" on center stud pattern).
Answered by: telecomguy
Date published: 2021-12-02

This is a test, please ignore it

Asked by: This is a test, please ig
  • y_2025, m_5, d_17, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_ENP0905NAV1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_legrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT
Back to Top